s

config_ats.js

@@ -170,6 +170,96 @@
 					"type": "ODB",		
 					"format": "ODB"
 				},
+				{
+					"valid": function(props){
+						var file = props.file;
+						return /.+\.art$/ig.test(file.name)
+					},  
+					"type": "Gerber274x",		
+					"format": "Gerber274x_2",
+					"format_params": function(props){
+						var params = props.params
+						if(params.art_param){
+							var leading = params.art_param["SUPPRESS_LEAD_ZEROES"]
+							var trailing = params.art_param["SUPPRESS_TRAIL_ZEROES"]
+							var zeroes = "none"
+							if(/yes/ig.test(leading)){
+								zeroes = "leading"
+							}
+							if(/yes/ig.test(trailing)){
+								zeroes = "trailing"
+							}
+							var nf1,nf2
+							if(params.art_param.hasOwnProperty("FORMAT")){
+								var tmp = params.art_param["FORMAT"].split(".")
+								if(/\d+/ig.test(tmp[0])){nf1 = Number(tmp[0])}
+								if(/\d+/ig.test(tmp[1])){nf2 = Number(tmp[1])}
+							}
+							return {
+								"nf1": nf1 || 3,
+								"nf2": nf2 || 5,
+								"units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
+								"zeroes": zeroes,
+								"decimal": "no",
+								"nf_comp": 0,
+								"break_sr": "yes",
+								"data_type": "ascii",
+								"separator": "*",
+								"threshold": 200,
+								"drill_only": "no",
+								"multiplier": 1,
+								"resolution": 3,
+								"tool_units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
+								"coordinates": "absolute",
+								"merge_by_rule": "no",
+								"signed_coords": "no",
+								"text_line_width": 0.0024
+							}
+						}
+					}
+				},
+				{
+					"valid": function(props){
+						var file = props.file;
+						return /.+\.drl$/ig.test(file.name)
+					},  
+					"type": "Excellon2",		
+					"format": "Excellon2_1",
+					"format_params": function(props){
+						var params = props.params
+						if(params.nc_param){
+							var leading = params.nc_param["SUPPRESS_LEAD_ZEROES"]
+							var trailing = params.nc_param["SUPPRESS_TRAIL_ZEROES"]
+							var zeroes = "none"
+							if(/yes/ig.test(leading)){
+								zeroes = "leading"
+							}
+							if(/yes/ig.test(trailing)){
+								zeroes = "trailing"
+							}
+							return {
+								"nf1": params.nc_param["INTEGER_PLACES"]? Number(params.nc_param["INTEGER_PLACES"]) : 3,
+								"nf2": params.nc_param["DECIMAL_PLACES"]? Number(params.nc_param["DECIMAL_PLACES"]) : 5,
+								"units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
+								"zeroes": zeroes,
+								"decimal": "no",
+								"nf_comp": 0,
+								"break_sr": "yes",
+								"data_type": "ascii",
+								"separator": "nl",
+								"threshold": 200,
+								"drill_only": "no",
+								"multiplier": 1,
+								"resolution": 3,
+								"tool_units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
+								"coordinates": params.nc_param["COORDINATES"]? params.nc_param["COORDINATES"].toLowerCase() :"absolute",
+								"merge_by_rule": "no",
+								"signed_coords": "no",
+								"text_line_width": 0.0024
+							}
+						}
+					}
+				},
 				{
 					"valid": function(props){
 						var file = props.file;
@@ -337,7 +427,7 @@
 				{"orig_name" : ["\\.rou$","^rout$"], "tl_name" : "rout" },
 				{"orig_name" : "fab.art", "tl_name" : "fab.art" },
 				{"orig_name" : ["multipack.art","^array$"], "tl_name" : "array" },
-				{"orig_name" : ["outline.art","^outline$"], "tl_name" : "outline" },
+				{"orig_name" : ["^outline"], "tl_name" : "outline" },
 				{"orig_name" : "top-enig", "tl_name" : "top-enig" },
 				{"orig_name" : "bot-enig", "tl_name" : "bot-enig" },
 				{"orig_name" : "fab_page2", "tl_name" : "fab_page2" },

jtg/JTG_ORG_create_outline_aim.js

@@ -98,9 +98,6 @@ try {
 	if(par.outline == "" || par.outline == undefined || par.outline == null || par.outline == "null"){
 		outline_symbol = "null";
 	} else {
-		if(!/^(([^0][0-9]+|0)\.([0-9]{1,2})$)|^([^0][0-9]+|0)$/ig.test(par.outline_width)){
-			throw "outline_width failed"
-		}
 		par.outline_width = parseFloat(par.outline_width)
 		outline_symbol = "r" + String(par.outline_width * 1000);
 	}
@@ -117,36 +114,44 @@ try {
 	if(GEN.checkInout({job:job,mode:"test"}) != 0){ throw "the job check" }
     GEN.checkInout({job:job,mode:"out"});
 	// 判断参考层（ref_outline）是否存在并不为空
-	if(!GEN.isLayerExists({job:job,layer:ref_outline})){throw "ref_outline不存在"}
+	var is_outline_exist = GEN.isLayerExists({job:job,layer:outline})
+	if(!GEN.isLayerExists({job:job,layer:ref_outline})){
+		if(!is_outline_exist){
+			throw "外形层不存在"
+		}
+	}
 	var steplist = GEN.getStepList({job:job})
-	steplist.forEach(function(step){
-		if(!GEN.isLayerEmpty({job:job,step:step,layer:ref_outline})){
-			// 创建新的外形层（outline）
-			GEN.openStep({job:job,name:step})
-			if(GEN.isLayerExists({job:job,layer:outline})){
-				GEN.workLayer({name:outline,display_number:2,clear_before:'yes'})
-				GEN.selDelete()	
-			}else {
-				GEN.createLayer({job:job,layer:outline,conext:"misc",type:"document"})
-			}
-			// 将参考层copy到外形层中
-			GEN.selClearFeature()
-			GEN.workLayer({name:ref_outline,display_number:2,clear_before:'yes'})
-			GEN.selAllFeat()
-			GEN.selCopyOther({dest:"layer_name", target_layer:outline})
-			GEN.selClearFeature()
-			GEN.workLayer({name:outline,display_number:2,clear_before:'yes'})
-
-			if(outline_symbol != "null"){
-				GEN.selChangeSym({symbol: outline_symbol})
+	if(!is_outline_exist){
+		steplist.forEach(function(step){
+			if(!GEN.isLayerEmpty({job:job,step:step,layer:ref_outline})){
+				// 创建新的外形层（outline）
+				GEN.openStep({job:job,name:step})
+				GEN.createLayer({job:job,layer:outline,conext:"board",type:"rout"})
+				// 将参考层copy到外形层中
 				GEN.selClearFeature()
+				GEN.workLayer({name:ref_outline,display_number:2,clear_before:'yes'})
+				GEN.selAllFeat()
+				GEN.selCopyOther({dest:"layer_name", target_layer:outline})
+				GEN.closeStep()
 			}
-					
-			GEN.clearLayers()
-			GEN.closeStep()
+		})
+	}
+	
+	steplist.forEach(function(step){
+		// 修改外形层
+		GEN.openStep({job:job,name:step})
+		GEN.affectedLayer({affected:'no',mode:'all'})
+		GEN.selClearFeature()
+		GEN.workLayer({name:outline,display_number:2,clear_before:'yes'})
+		if(outline_symbol != "null"){
+			GEN.selChangeSym({symbol: outline_symbol})
 		}
+		GEN.selCreateProfile()
+		GEN.clearLayers()
+		GEN.closeStep()
 	})
 
+
 	// 保存 
 	if(/yes/ig.test(par.auto_save)){
 		GEN.checkInout({job:job,mode:"out"})  // 结束保存料号 关闭料号
@@ -157,7 +162,14 @@ try {
 		GEN.checkInout({job:job,mode:"in"})
 	}
 
-
+	if(/yes/ig.test(par.auto_save)){
+		GEN.checkInout({job:job,mode:"out"})  // 结束保存料号 关闭料号
+		GEN.saveJob({ job: job });
+		GEN.checkInout({job:job,mode:"in"})
+		GEN.closeJob({job:job})
+	} else {
+		GEN.checkInout({job:job,mode:"in"})
+	}
 
     QDfm.updateRow({
 		table: "pdm_aimdfm_task",

jtg/JTG_ORG_delete_profile_aim.js

@@ -113,7 +113,10 @@ try {
 			include_syms:cutting_marign_symbol,
 			profile: "out"
 		})
-		GEN.selDelete()   // ?
+		if(GEN.getSelectCount()> 0){
+			GEN.selDelete()   
+		}
+		GEN.affectedLayer({affected:'no',mode:'all'})
 		GEN.closeStep()
 	})
 

jtg/JTG_ORG_input_data_aim.js

@@ -73,14 +73,14 @@ if (!$.hasOwnProperty('auto_save')){
 	PAR.auto_save = "no"
 }
 // drill tool manage
-var drill_toll_manage = []
+var drill_toll_manage = {}
 try {
 
     var par = PAR;
     var config = {
         format: {
             "Gerber274x_1": {
-                "nf1": 2,
+                "nf1": 5,
                 "nf2": 5,
                 "units": "inch",
                 "zeroes": "leading",
@@ -98,10 +98,10 @@ try {
                 "merge_by_rule": "no",
                 "signed_coords": "no",
                 "text_line_width": 0.0024
-            },
+			},
             "Excellon2_1": {
                 "nf1": 2,
-                "nf2": 5,
+                "nf2": 3,
                 "units": "inch",
                 "zeroes": "none",
                 "decimal": "no",
@@ -118,7 +118,7 @@ try {
                 "merge_by_rule": "no",
                 "signed_coords": "no",
                 "text_line_width": 0.0024
-            }
+			}
         },
         odb: [{
             vaild: function(item){
@@ -141,7 +141,7 @@ try {
                 format: "Excellon2_1"
             }
         ]
-    }
+	}
     if(!par.hasOwnProperty("path")){throw "缺少资料路径"}
 	if(_.isEmpty(Job)){throw "参数Job不存在"}
 	var job = Job.toLowerCase()
@@ -167,7 +167,9 @@ try {
             if(/\.drl$/ig.test(file.name)){
                 var backUpName = file.name+".backup"
                 // 备份
-                fs.copyFile(file.path,file.dir+"/"+backUpName)
+                if(!fs.fileExists(file.dir+"/"+backUpName)){
+                    fs.copyFile(file.path,file.dir+"/"+backUpName)
+                }
                 // 读取
                 var data = fs.readFile(file.path)
                 data = data.split("\n")
@@ -177,6 +179,7 @@ try {
                 var headData = head.filter(function(v){
                     return /Holesize.+Tolerance.+PLATED/ig.test(v)
                 })
+               
                 headData.map(function(v){
                     var res = {
                         holesize: {},
@@ -195,12 +198,18 @@ try {
                     res.tolerance.bot = Tolerance_tmp[1].trim()
         
                     res.attr = /NON_PLATED/ig.test(v) ? "non_plated" : "plated"
-                    res.unit = /MILES/ig.test(v) ? "inch" : "mm"
+                    res.unit = /MILS/ig.test(v) ? "inch" : "mm"
                     res.quantity = parseInt(v.split("=").pop())
-                    drill_toll_manage.push(res)
+                    if(!drill_toll_manage.hasOwnProperty(file.name)){
+						drill_toll_manage[file.name] = {}
+					}
+                    drill_toll_manage[file.name][/(\d+)/ig.exec(res.holesize.key)[1]] = res
                 })
                 // 给body添加刀
                 var count = 0
+                body = body.filter(function(v){
+					return !(/T\d+/ig.test(v))
+				})
                 body.forEach(function(v, i){
                     if(/^%$|^M00/ig.test(v)){
                         var k = "T" + getK(++count)
@@ -212,10 +221,31 @@ try {
                 fs.writeFile(file.path,resStr)
             }
         })
-        drill_toll_manage.forEach(function(v){
-            console.log(v);
-        })
-        // importGerber({job:job,step:"pcs",db:"genesis",data:inputInfo.data})      
+        importGerber({job:job,step:"orig",db:"genesis",data:inputInfo.data})  
+		var stepList = GEN.getStepList({job:job})
+		var matrix = GEN.getMatrix({job:job})
+		var drill_layers = Object.keys(matrix).filter(function(v){return matrix[v].layer_type=="drill"})
+		stepList.forEach(function(step){
+			GEN.openStep({job:job,name:step})     
+			drill_layers.forEach(function(layer){
+				var drill_tool_manage_info = drill_toll_manage[layer]
+				var drill_tool_keys = Object.keys(drill_tool_manage_info).sort(function(a,b){return a-b})
+				GEN.COM("tools_tab_reset")
+				drill_tool_keys.forEach(function(key){
+					var val = drill_tool_manage_info[key]
+					GEN.COM("tools_tab_add", {
+						num: key,
+						type: /plated/ig.test(val.attr) ? "plate" : "nplate",
+						min_tol: Number(val.tolerance.top),
+						max_tol: Number(val.tolerance.bot),
+						finish_size: Number(val.holesize.value),
+						drill_size: Number(val.holesize.value)
+					})
+				})
+				GEN.COM("tools_set",{layer:layer,thickness:0,user_params:1,slots:"by_length"})
+			})
+			GEN.closeStep()
+		})  
     }
 
     // 保存 

jtg/JTG_ORG_set_origin_aim.js

@@ -42,7 +42,7 @@ PARAMETER:
 */
 //////////////////////////////////////////////////////////////
 //////////////////////////////////////////////////////////////
-console.log("==============================>设置零点");
+console.log("==============================>set origin");
 // 引入模块 包
 var $ = require('topcam.scriptfunc').argv();
 var fs = require('fs');
@@ -80,7 +80,7 @@ try {
 			par[key] = default_par[key]
 		}
 	}
-	if(_.isEmpty(Job))
+	if(_.isEmpty(Job)){throw "Job参数未拿到"}
 	var job = Job.toLowerCase()
 	var outline = par.outline
 	// 检查料号是否存在
@@ -103,19 +103,13 @@ try {
 		    var outline_symbol = GEN.getSymbolLimits({job:job,symbol:outline})
 			GEN.affectedLayer({affected:"yes",mode:"all"})
 			GEN.selMove({dx:-outline_symbol.xmin,dy:-outline_symbol.ymin})
-
-			// 创建为profile
 			GEN.affectedLayer({affected:"no",mode:"all"})
-			GEN.workLayer({name:outline,display_number:2,clear_before:'yes'})
-			GEN.selAllFeat()
-			GEN.selCreateProfile()
 			GEN.clearLayers()
 			GEN.selClearFeature()
-			GEN.closeJob()
+			GEN.closeStep()
 		}
 	})
 
-
 	// 保存 
 	if(/yes/ig.test(par.auto_save)){
 		GEN.checkInout({job:job,mode:"out"})  // 结束保存料号 关闭料号
@@ -126,6 +120,7 @@ try {
 		GEN.checkInout({job:job,mode:"in"})
 	}
 
+	console.log("set origin end")
 
 
     QDfm.updateRow({

test/ATS_AIM_customer_副本.js

@@ -148,7 +148,6 @@ try {
     //         })
     //     })
     // })
-
     // stepList.forEach(function(step){
     //     GEN.openStep({ job: Job, step: step })
     //     GEN.clearLayers()

test/mytest.js

@@ -10,19 +10,24 @@ var Job = $.job;
 var JobId = $.job_id;
 
 try {
-    
-    var job = "4"
-
-    var tmp = [{signalL:"top",solderL:"sm_top"}, {signalL:"top",solderL:null}]
-    // exposed
-    tmp.forEach(function(item){
-        if(item.solderL){
-            IKM.msg(GEN.exposedArea({layer1:item.signalL,mask1:item.solderL})) 
-            // {"area":"0.73817","percent":"8.986"}
-        }
-    })
-	return "Done"
+    var job = "1"
+    var step = "cad"
+    var matrix = GEN.getMatrix({job:job})
+    IKM.msg(matrix)
+    return "Done"
 } catch (e) {
 	IKM.msg(e)
 	return "Error"
 }
+// COM sel_cut_data,det_tol=1,con_tol=1,rad_tol=0.1,filter_overlaps=no,delete_doubles=no,use_order=yes,ignore_width=yes,ignore_holes=none,start_positive=yes,polarity_of_touching=same
+// COM sel_single_feat,operation=select,x=-0.3463252953,y=0.7876788386,tol=25.4822834646,cyclic=no
+// COM sel_surf2outline,width=15
+
+function selCopyLayer(props){  // 拷贝选择的到辅助层
+    var layer = props.layer
+    var job = props.job
+    if(GEN.isLayerExists({job:job,layer:layer})){
+        GEN.deleteLayer({job:job,layer:layer})
+    }
+    GEN.selCopyOther({dest:'layer_name',target_layer:layer})
+}
\ No newline at end of file

test/test.js

-try {
-    var query = new TSqlQueryV2(T_SQLCNT_POOL.getSqlDatabase());
-    var selector = new TSqlSelectorV2;
-    selector.setTable("pdm_job_work_layer");
-    selector.setField(["name"]);
-    selector.setWhere("job_id", this.jobId);
-    selector.addWhere('type', 'outer');
-    selector.setOrder("row_num", 1);
-    var layerList = query.selectArrayValue(selector);
-    if (query.lastError().isValid()) {
-        throw query.lastError();
-    }
 
-    selector.clear();
-    selector.setTable("pdm_job_layerattr");
-    selector.setField(["attr_name", "layer", "value"]);
-    selector.setWhere("job_id", this.jobId);
-    selector.addWhere('layer', layerList);
-    var attrList = query.selectArrayMap(selector);
-    if (query.lastError().isValid()) {
-        throw query.lastError();
-    }
+var tmp = "12.5466"
 
-    selector.clear();
-    selector.setTable("pdm_job_work_layer");
-    selector.setField(["odb_name", "side"]);
-    selector.setWhere("job_id", this.jobId);
-    selector.addWhere('odb_context', 'board');
-    selector.setOrder("type", "solder_mask");
-    var nameList = query.selectArrayMap(selector);
-    if (query.lastError().isValid()) {
-        throw query.lastError();
-    }
-
-    var goldMap = {};
-    var refLayerMap = {};
-    _.each(nameList, function (item) {
-        if (item["odb_name"] == "gold") {
-            goldMap[item["side"]] = item["odb_name"];
-        } else if (item["odb_name"] == "ref_layer") {
-            refLayerMap[item["side"]] = item["odb_name"];
-        }
-    })
-
-    var dataMap = {};
-    _.each(attrList, function (valueMap) {
-        var tempList = [];
-        if (!_.isEmpty(dataMap[valueMap["layer"]])) {
-            tempList = dataMap[valueMap["layer"]];
-        }
-
-        tempList.push(valueMap);
-        dataMap[valueMap["layer"]] = tempList;
-    })
-
-    var retMap = {};
-    for (var key in dataMap) {
-        var tempMap = {};
-        _.each(dataMap[key], function (itemMap) {
-            tempMap[itemMap["attr_name"]] = itemMap["value"];
-        })
-        retMap[key] = tempMap;
-    }
-
-    var itemList = ["top", "bottom"];
-    var retList = [];
-    _.each(itemList, function (item) {
-        var tempMap = retMap[item];
-        tempMap["gold"] = goldMap[item];
-        tempMap["ref_layer"] = refLayerMap[item];
-        retList.push(tempMap);
-    })
-
-    return JSON.stringify(retList);
-} catch (e) {
-    print(e);
-    GUI.msgbox({
-        title: 'Error',
-        detail: e
-    });
-}
+console.log(tmp.toFixed(2));
\ No newline at end of file