s

ats/scott_test/analysis_test.js

@@ -429,8 +429,9 @@ try {
             depth_drilling: {api:"layer_exist", props:"depth_drill"},  // yes|no :存在 depth_drill 层时 ,存yes
             depth_routing: {api:"layer_exist", props:"depth_routing"},  // tmp yes|no :存在 depth_routing 层时，,存yes
             laser_via_on_buried_hole: true,  // via孔在埋孔上时，存yes
-            milling_bit_size: true,  // todo 检查array中pcs的最小间距值
-            milling_length: true,  // todo 检查array中铣切长度
+            milling_bit_size: false,  // todo 检查array中pcs的最小间距值
+            milling_length_card: true,
+            milling_length_array: true,
             vc_src_01005_pad_result: {api:"board_has_attr", props:vc_src_01005_pad_result},  // 本地使用 .pth_pad ats 01005_pad
             ATS_technology_25dc: {api:"layer_exist", props:["bot_coverlay","top_coverlay"]},  // yes|no：存在cavity层别时存yes
             ATS_technology_25dr: {api:"layer_exist", props:["bot_coverlay","top_coverlay"]},  // yes|no：存在cavity层别时存yes
@@ -468,6 +469,7 @@ try {
                     jobInfo[key] = analysis_obj["analysis_"+key](props)
                 }
             } catch (e) {
+                console.log("========================================error:");
                 console.log(e);
                 jobInfo[key] = "_error"
             }
@@ -490,7 +492,7 @@ try {
         jobinfohash: jobInfo
     })
     console.log("===================================> 5 save drill info")
-    
+
     // * 获取pcs_step 和 array_step的钻孔信息
     var drill_tool_info = {}; 
     var drillLayers = analysis_obj.matrixInfo.mDrills;
@@ -1464,8 +1466,60 @@ function analysis(props){
     T_m_p.prototype.analysis_milling_bit_size = function(){        // todo 
         return "_todo"
     }
-    T_m_p.prototype.analysis_milling_length = function(){        // todo 
-        return "_todo"
+    T_m_p.prototype.analysis_milling_length_card = function(){        // todo 
+        var allStep = [this.pcs_step, this.array_step]
+        var res = 0
+        var that = this;
+        console.log("============analysis_milling_length_card=============");
+        console.log("========step========:"+_.toString(allStep));
+        var steps = GEN.getStepList({job:this.job})
+        allStep.forEach(function(step){
+            if(steps.indexOf(step)>=0){
+                GEN.openStep({job:that.job,name:step})
+                var tmp = "length_tmp"
+                if(GEN.isLayerExists({job:that.job,layer:tmp})){GEN.deleteLayer({job:that.job,layer:[tmp]})}
+                GEN.createLayer({job:that.job,layer:tmp,conext:'misc',type:'document'})
+                GEN.COM("profile_to_rout,layer="+tmp+",width=1")
+                var feautres = GEN.getFeatures({job:that.job,step:step,layer:tmp,units:"mm"})
+                fs.writeFile("/home/samba/tmp/tmp.js", _.toString(feautres))
+                // 根据feautres 算出周长
+                var milling = Object.keys(feautres).reduce(function(a,b){
+                    var value = feautres[b]
+                    if (value.type=="line"){
+                        length = Math.sqrt((Number(value.xe)-Number(value.xs))*(Number(value.xe)-Number(value.xs)) + (Number(value.ye)-Number(value.ys))*(Number(value.ye)-Number(value.ys)))
+                        a += length
+                    } else if (value.type=="arc") {
+                        a += arcLength(Number(value.xs),Number(value.ys),Number(value.xe),Number(value.ye),Number(value.xc),Number(value.yc))
+                    }
+                    return a 
+                }, 0) 
+                console.log("========milling:"+milling);
+                res += milling
+                console.log("========res:"+res);
+                GEN.deleteLayer({job:that.job,layer:[tmp]})
+            }
+        })
+        return res.toFixed(3)
+    }
+    T_m_p.prototype.analysis_milling_length_array = function(){        // todo 
+        if(!this.array_step){return "_error"}
+        GEN.openStep({job:this.job,name:this.array_step})
+        var tmp = "length_tmp"
+        GEN.COM("profile_to_rout,layer="+tmp+",width=1")
+        var feautres = GEN.getFeatures({job:this.job,step:this.array_step,layer:tmp,units:"mm"})
+        // 根据feautres 算出周长
+        var milling = Object.keys(feautres).reduce(function(a,b){
+            var value = feautres[b]
+            if (value.type=="line"){
+                length = Math.sqrt((value.xe-value.xs)*(value.xe-value.xs) + (value.ye-value.ys)*(value.ye-value.ys))
+                a += length
+            } else if (value.type=="arc") {
+                a += arcLength(Number(value.xs),Number(value.ys),Number(value.xe),Number(value.ye),Number(value.xc),Number(value.yc))
+            }
+            return a 
+        }, 0)
+        GEN.closeStep()
+        return milling
     }
     T_m_p.prototype.analysis_board_has_attr = function(props){        //  board层中检查存在01005属性物件时
         GEN.openStep({job:this.job,name:this.pcs_step})
@@ -1544,7 +1598,7 @@ function analysis(props){
         } else if (solder_paste_info.length == 1) {
             res = /top/ig.test(solder_paste_info[0]) ?  "FRONT1" : "BACK1"
         } else {
-            res = "FRONT1_BACK1"
+            res = "FRONT1;BACK1"
         }
         return res
     }
@@ -2321,4 +2375,13 @@ function saveMeans(props){
 	var respath = mkPath(basepath,[step,"chk",chklist+"_"+nact,layer])
     fs.writeFile(respath+"/meas",meas.join("\n"))
     fs.chmod(respath+"/meas",777)
+}
+
+// 算弧长
+function arcLength(x1,y1,x2,y2,x3,y3){
+	var cos0 =  +((x3-x1)*(x2-x3) + (y3-y1)*(y2-y3)) / (Math.pow((Math.pow(x2-x3,2) + Math.pow(y2-y3,2)),0.5) * Math.pow((Math.pow(x3-x1,2) + Math.pow(y3-y1,2)),0.5))
+    var tmp = Math.acos(cos0)
+	var sin0 = Math.sin(tmp)
+	var length = +Math.sqrt(Math.pow(x2-x1,2) + Math.pow(y2-y1,2)) / sin0 * tmp
+	return length
 }
\ No newline at end of file

ats/scott_test/format_test.js

@@ -255,7 +255,6 @@ try {
 		var now_profile = GEN.getProfile({job:job, step:tmp_step})
 		if(now_profile.match(/\n/ig).length == 1){  // 如果没有profile
 			createOutline({job:job, step:tmp_step, matrix: tmp_matrix, profileRule:profileRule})
-			throw "tmp"
 			var hasProfile = GEN.getProfile({job:job, step:tmp_step})
 			if(hasProfile.match(/\n/ig).length == 1){
 				throw "创建profile失败"
@@ -636,6 +635,7 @@ function createOutline(props){
 		if(GEN.getSelectCount()>0){GEN.selDelete()}
         GEN.selClearFeature()
         GEN.COM("sel_cut_data,det_tol=1,con_tol=1,rad_tol=0.1,filter_overlaps=no,delete_doubles=no,use_order=yes,ignore_width=yes,ignore_holes=none,start_positive=yes,polarity_of_touching=same")
+		GEN.selContourize()
 		GEN.selectByFilter({feat_types:"surface"})
 		GEN.selReverse()
 		if(GEN.getSelectCount()>0){GEN.selDelete()}
@@ -647,7 +647,8 @@ function createOutline(props){
 			GEN.workLayer({name:l,display_number:2,clear_before:"yes"})
             GEN.selAllFeat()
             GEN.selDelete()
-            GEN.workLayer({name:tmp_outline2,display_number:2,clear_before:"yes"})
+			GEN.workLayer({name:tmp_outline2,display_number:2,clear_before:"yes"})
+			GEN.COM("sel_clean_holes,max_size=200,clean_mode=x_and_y")
 			GEN.COM("sel_surf2outline,width=1")
             GEN.selAllFeat()
             selCopyLayer({job:job,layer:l})

config_ats.js

@@ -1008,6 +1008,7 @@
 			],
 			"mergerule" : {
 				drill:["(\\d+)-(\\d+)\\.drl$"],
+				profile:["sm_top"],
 				laser : {
 					tl_name: "drill($1)-($2)",
 					regs: ["(\\d+)-(\\d+)\\.drl$"]

test/mytest.js

@@ -10,15 +10,7 @@ var Job = $.job;
 var JobId = $.job_id;
 
 try {
-
-
-
     
-
-
-
-
-
     return "Done"
 } catch (e) {
 	return "Error"