Skip to content

S
Scott
Switch branch/tag
Find file
BlameHistoryPermalink
线转铜皮.pl 13.7 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 
=head
 NAME: 
 DESCRIPTION: Signal线路挑选线性铜
 PARAMETER:
	[
		{
			name : 'step_filter',
			type : 'LineEdit',
			title : 'step过滤',
			pack : {row:0,column:1},
			property:{tool_tip:'选择step时候的过滤器'},
		},
		{
			name : 'line_number_min',
			type : 'LineEdit',
			title : 'line转铜最小数量',
			pack : {row:0,column:1},
			property:{tool_tip:'line转铜最小数量'},
		},
		{
			name : 'bak_layer_suf',
			type : 'LineEdit',
			title : '备份层后缀',
			pack : {row:0,column:1},
			property:{tool_tip:'去铜丝参数'},
		}
	]
 VERSION_HISTORY:
	V1.00 2020-11-1 Super
	   1.新版本
 HELP:
	<html><body bgcolor="#DDECFE">
		<font size="3" color="#003DB2"><p>功能简介</p></font>
		  <p> DFM优化 </p>
		  <br>
		<font size="3" color="#003DB2"><p>参数配置</p></font>
		<font color="#008000"><p> ● 无</p></font>
		<font size="3" color="#003DB2"><p>注意事项</p></font>
		  <p> ● 无 </p>
		  <br>
	</body></html>
  
=cut

use strict;
use utf8;
use Data::Dump 'dump';
my ($Job,$Step)=($JOB,undef);
my $Report = 'done';
my @work_layers;

$PAR->{line_number_min} = $PAR->{line_number_min} > 0 ? $PAR->{line_number_min} : 'max';#line转铜最小数量
$PAR->{bak_layer_suf} = $PAR->{bak_layer_suf} ? $PAR->{bak_layer_suf} : '++-bak-suface++';

try {
	###检查Genesis料号是否存在并打开
	show_loading("检查${Job}是否存在..",0,position=>'n');
	if (! $GEN->isJobExists(job=>$Job) ){
        $GUI->msgbox(-icon=>'error',-text=>"料号 $Job 在Genesis中不存在, 请检查!");
        return 'Error';
    }

	update_loading("正在打开料号 ${Job} ...",0,position=>'n');
	$GEN->openJob(job=>$Job) unless ($GEN->isJobOpen(job=>$Job));

	my @steps =  $GEN->getStepList(job=>$Job);
	if ( @steps == 0 ) {
		$GUI->msgbox(-icon=>'error',-text=>'在料号中没有Step存在,你将退出!');
		return 'Error';
	}
	elsif (@steps != 1){
		my $srep_filter = $PAR->{step_filter} ? $PAR->{step_filter} : '.*';
        my @tmp_steps = grep(/$srep_filter/,@steps);
		if ( @tmp_steps == 0 ) {
			$GUI->msgbox(-icon=>'error',-text=>'在料号中没有过滤器中的step存在,你将退出!');
			return 'Error';
		}
        elsif ( @tmp_steps == 1 ) {
            $Step = $tmp_steps[0];
        }
        else {
            $Step = $GUI->select_step(-title=>'请选择工作Step',
                                      -steplist=>\@tmp_steps,
                                      -selectmode=>'single');
            return 'Cancel' unless ($Step);            
        }
	}
    else {
        $Step = $steps[0];
    }

	##
	update_loading("过滤层别...",0,position=>'n');
	@work_layers = get_work_layer();
	return 'Cancel' if grep /^Cancel$/,@work_layers;

	###打开step
	$GEN->openStep(job=>$Job,name=>$Step);
	$GEN->clearLayers();
	$GEN->affectedLayer( mode=>'all',affected=>'no' );
	$GEN->COM( "sel_options,clear_mode=clear_after,display_mode=all_layers,area_inout=inside,area_select=select,select_mode=standard,area_touching_mode=exclude");
	$GEN->units(type=>'inch');
	$GEN->zoomHome();

	update_loading("挑选铜皮中...",0,position=>'n');

	$GEN->COM("disp_off");
	foreach my $layer (@work_layers){
		my @feat = $GEN->getFeatures(job=>$Job,step=>$Step,layer=>$layer,options=>'break_sr');
		next unless @feat;
		my %line_info;
		foreach my $tmp (@feat){
			if($tmp->{type} eq 'line' or $tmp->{type} eq 'arc'){
				++$line_info{$tmp->{symbol}};
			}
		}
		next unless keys %line_info;
		my @tmp = sort {$line_info{$b} <=> $line_info{$a}} keys %line_info;
		#创建铜皮层
		my $line_suface = 'tl++tmp+line+suf+++';
		my $line_chek = 'tl++check+line++type++';
		$GEN->createLayer(job=>$Job,layer=>$line_suface,context=>'misc',type=>'document',delete_exists=>'yes');
		$GEN->createLayer(job=>$Job,layer=>$line_chek,context=>'misc',type=>'document',delete_exists=>'yes');
		#备份层
		my $bak_layer = $layer.$PAR->{bak_layer_suf};
		$GEN->createLayer(job=>$Job,layer=>$bak_layer,context=>'misc',type=>'document',delete_exists=>'yes');
		$GEN->affectedLayer(affected=>'yes',layer=>$layer,clear_before=>'yes');
		$GEN->selCopyOther(target_layer=>$bak_layer,invert=>'no');

		if($PAR->{line_number_min} eq 'max'){
			select_line_suface(symbol_data=>$tmp[0],layer=>$layer,surface=>$line_suface,line_check=>$line_chek);
		}else{
			foreach my $data (@tmp){
				next if $line_info{$data} < $PAR->{line_number_min};
				select_line_suface(symbol_data=>$data,layer=>$layer,surface=>$line_suface,line_check=>$line_chek);
			}
		}

		if(! $GEN->isLayerEmpty(job=>$Job,step=>$Step,layer=>$line_chek)){
			update_loading("请确认 $line_chek 层挑选的线是否全部为线路层走线,请将需要转suface的走线选中...",0,position=>'n');
			$GEN->COM("disp_on");
			$GEN->clearLayers();
			$GEN->affectedLayer( mode=>'all',affected=>'no' );
			$GEN->workLayer(name=>$line_chek,display_number=>1,clear_before=>'yes');
			$GEN->displayLayer(name=>$line_suface,number=>2);
			my $ans = $GEN->PAUSE("Please check line type!");
			unless (defined $ans and $ans eq 'OK' ) {
				return 'Cancel';
			}else{
				$GEN->COM("disp_off");
				$GEN->selMoveOther(target_layer=>$line_suface,invert=>'no') if ( $GEN->getSelectCount() > 0 );
				$GEN->selMoveOther(target_layer=>$layer,invert=>'no');
				$GEN->clearLayers();
				$GEN->deleteLayer(job=>$Job,layer=>[$line_chek]);
			}
		}else{
			$GEN->deleteLayer(job=>$Job,layer=>[$line_chek]);
		}


		if(! $GEN->isLayerEmpty(job=>$Job,step=>$Step,layer=>$line_suface)){
			update_loading("请仔细检查 $line_suface 层挑选的线是否正确...",0,position=>'n');
			$GEN->COM("disp_on");
			$GEN->clearLayers();
			$GEN->affectedLayer( mode=>'all',affected=>'no' );
			$GEN->workLayer(name=>$line_suface,display_number=>1,clear_before=>'yes');
			$GEN->displayLayer(name=>$layer,number=>2);
			my $ans = $GEN->PAUSE("Please check !");
			unless (defined $ans and $ans eq 'OK' ) {
				return 'Cancel';
			}else{
				$GEN->COM("disp_off");
				$GEN->selContourize();
				$GEN->selMoveOther(target_layer=>$layer,invert=>'no');
				# $GEN->affectedLayer(affected=>'yes',layer=>$layer,clear_before=>'yes');
				# $GEN->COM('sel_drawn',type=>'mixed',therm_analyze=>'yes');
				# $GEN->selContourize() if ( $GEN->getSelectCount() > 0 );
				$GEN->clearLayers();
				$GEN->deleteLayer(job=>$Job,layer=>[$line_suface]);
			}
		}else{
			$GEN->deleteLayer(job=>$Job,layer=>[$line_suface]);
			$GEN->copyLayer(source_job=>$Job,source_step=>$Step,source_layer=>$bak_layer,dest_layer=>$layer,mode=>'replace',invert=>'no') ;
		}
	}

	$GUI->msgbox(-icon=>'info',-text=>'脚本运行完成请仔细检查！');

    ###output and return status, if genesis error, it will output genesis error command
	unless ($GEN->{STATUS}){
		return $Report;
	}
	else{
		$GUI->msgbox(-icon=>'error',-text=>join("\n",@{$GEN->{STATUS}}));
		addFlowNotes(-notes=>"   Genesis Error:\n ".join("\n   ",@{$GEN->{STATUS}}));
		return 'Error';
	}
}

catch Error::Simple with {
	my $error = shift;
	$GUI->msgbox(-icon=>'error',-text=>$error);
	return 'Error';
}

finally{
	$GEN->clearLayers();
	$GEN->affectedLayer( mode=>'all',affected=>'no' );
	$GEN->COM("disp_on");
};



=head
	选择线路层
=cut
sub get_work_layer{	
	# 获取工作层
	my %matrix = $GEN->getMatrix(job=>$Job,type=>'hash');
	foreach my $layer (sort {$matrix{$a}{row} <=> $matrix{$b}{row}}  keys %matrix) {
		if(defined($matrix{$layer}{context}) and $matrix{$layer}{context} eq 'board' ){
			if(defined($matrix{$layer}{layer_type}) and $matrix{$layer}{layer_type} eq 'signal' ){
				push @work_layers,$layer;
			}			
		}
	}	
	
	my %tmp_matrix;
	foreach my $layer (@work_layers) {
		$tmp_matrix{$layer} = $matrix{$layer};
	}	
	
	if (@work_layers > 1) {
		@work_layers = $GUI->select_layer(
			-title=>'请选择工作层别',
			-layermatrix=>\%tmp_matrix,
			-selectmode => 'multiple');#single
		return 'Cancel' unless(@work_layers);
	}
	else {
		@work_layers = @work_layers;
	}
	return @work_layers;
}

=head
	挑选线性铜皮 symbol_data=>,layer=>,surface=>
=cut
sub select_line_suface
{
	my %par = @_;
	$GEN->affectedLayer(affected=>'yes',layer=>$par{layer},clear_before=>'yes');
	#挑选最多D码的线
	my $line_tmp = '++-+tl+tmp++line';
	$GEN->createLayer(job=>$Job,layer=>$line_tmp,context=>'misc',type=>'document',delete_exists=>'yes');
	$GEN->selectByFilter(feat_types=>'line\;arc',polarity=>'positive',include_syms=>$par{symbol_data},profile=>'all');
	$GEN->selMoveOther(target_layer=>$line_tmp,invert=>'no') if ( $GEN->getSelectCount() > 0 );

	#挑选PAD
	my $pad_tmp = '++-+tl+tmp++pad';
	$GEN->createLayer(job=>$Job,layer=>$pad_tmp,context=>'misc',type=>'document',delete_exists=>'yes');
	$GEN->selectByFilter(feat_types=>'pad',polarity=>'positive',profile=>'all');
	$GEN->selCopyOther(target_layer=>$pad_tmp,invert=>'no',size=>0);
	#删除cover的pad
	my $line_tmp2 = '++-+tl+tmp++line2';
	$GEN->createLayer(job=>$Job,layer=>$line_tmp2,context=>'misc',type=>'document',delete_exists=>'yes');
	$GEN->affectedLayer(affected=>'yes',layer=>$line_tmp,clear_before=>'yes');
	$GEN->selCopyOther(target_layer=>$line_tmp2,invert=>'no');
	$GEN->affectedLayer(affected=>'yes',layer=>$line_tmp2,clear_before=>'yes');
	$GEN->selContourize();
	$GEN->affectedLayer(affected=>'yes',layer=>$pad_tmp,clear_before=>'yes');
	$GEN->selRefFeat(layers=>$line_tmp2,use=>'filter',mode=>'cover');
	$GEN->selDelete() if ( $GEN->getSelectCount() > 0 );
	$GEN->COM('truncate_layer', layer =>$line_tmp2);

	#挑选与pad连接的线
	$GEN->affectedLayer(affected=>'yes',layer=>$line_tmp,clear_before=>'yes');
	$GEN->selRefFeat(layers=>$pad_tmp,use=>'filter',mode=>'touch');
	my $touch_pad_line = '++-+touch++pad++line';
	if ( $GEN->getSelectCount() > 0 ){
		$GEN->createLayer(job=>$Job,layer=>$touch_pad_line,context=>'misc',type=>'document',delete_exists=>'yes');
		$GEN->selMoveOther(target_layer=>$touch_pad_line,invert=>'no');
	}

	#挑选单独的线移回工作层
	$GEN->affectedLayer(affected=>'yes',layer=>$line_tmp,clear_before=>'yes');
	$GEN->selCopyOther(target_layer=>$line_tmp2,invert=>'no');
	$GEN->affectedLayer(affected=>'yes',layer=>$line_tmp2,clear_before=>'yes');
	$GEN->selContourize();
	my ($size) = $par{symbol_data} =~ /r(.*)/;
	$GEN->COM('sel_resize',size=>-($size+0.05),corner_ctl=>'no');
	$GEN->COM(" sel_clean_surface,accuracy=0.25,clean_size=3,clean_mode=x_and_y,max_fold_len=0");
	$GEN->COM('sel_resize',size=>$size+0.05,corner_ctl=>'no');
	$GEN->affectedLayer(affected=>'yes',layer=>$line_tmp,clear_before=>'yes');
	$GEN->selRefFeat(layers=>$line_tmp2,use=>'filter',mode=>'disjoint');
	$GEN->selMoveOther(target_layer=>$par{layer},invert=>'no') if ( $GEN->getSelectCount() > 0 );

	if($GEN->isLayerExists(job=>$Job,layer=>$touch_pad_line)){
		$GEN->affectedLayer(affected=>'yes',layer=>$touch_pad_line,clear_before=>'yes');
		my $tmp_data = '+++-touch+pad+line+check';
		$GEN->createLayer(job=>$Job,layer=>$tmp_data,context=>'misc',type=>'document',delete_exists=>'yes');
		$GEN->selCopyOther(target_layer=>$tmp_data,invert=>'no',size=>0);
		$GEN->selContourize();
		#不与铜皮相连与PAD相连的移回线路层
		$GEN->selRefFeat(layers=>$line_tmp,use=>'filter',mode=>'disjoint');
		if ( $GEN->getSelectCount() > 0 ){
			my $tmp_layer = '++++-tl++line+touch--+';
			$GEN->createLayer(job=>$Job,layer=>$tmp_layer,context=>'misc',type=>'document',delete_exists=>'yes');
			$GEN->selMoveOther(target_layer=>$tmp_layer,invert=>'no');
			$GEN->affectedLayer(affected=>'yes',layer=>$tmp_data,clear_before=>'yes');
			$GEN->selRefFeat(layers=>$tmp_layer,use=>'filter',mode=>'touch');
			$GEN->selMoveOther(target_layer=>$par{layer},invert=>'no');
			$GEN->deleteLayer(job=>$Job,layer=>[$tmp_layer]);
		}
		$GEN->deleteLayer(job=>$Job,layer=>[$touch_pad_line]);

		#与铜皮和PAD相连
		my $pad_tmp2 = '++pad+++tl++tmp';
		$GEN->affectedLayer(affected=>'yes',layer=>$pad_tmp,clear_before=>'yes');
		$GEN->selRefFeat(layers=>$tmp_data,use=>'filter',mode=>'touch');
		if ( $GEN->getSelectCount() > 0 ){
			$GEN->createLayer(job=>$Job,layer=>$pad_tmp2,context=>'misc',type=>'document',delete_exists=>'yes');
			$GEN->selMoveOther(target_layer=>$pad_tmp2,invert=>'no');
			$GEN->COM('truncate_layer', layer =>$pad_tmp);
			my ($size) = $par{symbol_data} =~ /r(.*)/;
			my @feat = $GEN->getFeatures(job=>$Job,step=>$Step,layer=>$pad_tmp2);
			my $idex = 1;
			foreach my $data (@feat){
				my $pad_size;
				if ($data->{symbol} =~ /^s(\d.*)/) {
					$pad_size = $1;
				}elsif($data->{symbol} =~ /^r(\d.*)/){
					$pad_size = $1;
				}elsif($data->{symbol} =~ /^rect(\d.*)x(\d.*)/){
					$pad_size = $1 > $2 ? $2 : $1;
				}elsif($data->{symbol} =~ /^oval(\d.*)x(\d.*)/){
					$pad_size = $1 > $2 ? $2 : $1;
				}
				$GEN->affectedLayer(affected=>'yes',layer=>$pad_tmp2,clear_before=>'yes');
				$GEN->COM('sel_layer_feat',operation=>'select',layer=>$pad_tmp2,index=>$idex);
				$GEN->selMoveOther(target_layer=>$pad_tmp,invert=>'no',dx=>0,dy=>0,size=>0);
				$GEN->affectedLayer(affected=>'yes',layer=>$tmp_data,clear_before=>'yes');
				$GEN->selRefFeat(layers=>$pad_tmp,use=>'filter',mode=>'touch');
				my $number = $GEN->getSelectCount();
				if($number > 0){
					if($number > 4){
						if($number*$size / $pad_size > 0.5 ){
							$GEN->selMoveOther(target_layer=>$line_tmp,invert=>'no');
						}else{
							$GEN->selMoveOther(target_layer=>$par{line_check},invert=>'no');
						}
					}else{
						#4根以下算单根线的宽度
						if($size / $pad_size > 0.5 ){
							$GEN->selMoveOther(target_layer=>$line_tmp,invert=>'no');
						}else{
							$GEN->selMoveOther(target_layer=>$par{line_check},invert=>'no');
						}
					}
				}
				$idex++;
			}
			$GEN->deleteLayer(job=>$Job,layer=>[$pad_tmp2]);
		}
		$GEN->deleteLayer(job=>$Job,layer=>[$tmp_data]);
	}
	$GEN->deleteLayer(job=>$Job,layer=>[$pad_tmp,$line_tmp2]);
	$GEN->affectedLayer(affected=>'yes',layer=>$line_tmp,clear_before=>'yes');
	if($GEN->isLayerExists(job=>$Job,layer=>$par{surface})){
		$GEN->selMoveOther(target_layer=>$par{surface},invert=>'no');
		$GEN->deleteLayer(job=>$Job,layer=>[$line_tmp]);
	}
}