Skip to content

S
Scott
Commit cae41a62 authored by Scott Sun's avatar Scott Sun
Browse files
Options

scott

parent f81d71c9
Show whitespace changes
Inline Side-by-side
Showing with 260 additions and 1389 deletions
ats/topcam/ATS_AIM_checkin.js
View file @ cae41a62
......@@ -72,6 +72,7 @@ if (mode === "aimdfm") {
var Status = 'ok';
var resultData = [];
try {
console.log("=============================check in====================");
GEN.COM("open_job,job="+Job+",open_win=no,disk_map=,job_map=")
GEN.AUX("set_group,group=99")
GEN.COM("close_job,job="+Job+"")
......@@ -80,9 +81,26 @@ try {
GEN.COM("disp_on")
GEN.COM("origin_on")
GEN.COM("checkin_closed_job,job="+Job);
if (mode === "aimdfm") {
if (GEN.hasError()) {
Status = 'error';
resultData.push({ type: "error", title: "GEN错误!", detail: [{ desc: _.join(GEN.STATUS, "\n") }] });
return {
status: Status,
result_data: resultData
};
} else {
resultData.push({ type: "info", title: "操作完成, 请注意检查!" });
return {
status: Status,
result_data: resultData
};
}
}else {
return "Done"
}
}
catch (e) {
Status = 'error';
resultData.push({type: "error", title: "脚本执行出错!", detail: [{desc: _.toString(e)}]});
return (mode === "aimdfm") ? {status: Status, result_data: resultData} : "Error";
......
ats/topcam/ATS_AIM_customer_data_analysis.js
View file @ cae41a62
......@@ -166,8 +166,10 @@ if(mailUserList && mailUserList.length) {
})
}
var cam_workflow_info = IKM.get_jobinfo({jobid:JobId, jobinfo:"cam_workflow_info"});
console.log("==========cam_workflow_info===========:" + cam_workflow_info);
try {
if(cam_workflow_info && cam_workflow_info != ""){
console.log("==========cam_workflow_info===========:" + cam_workflow_info);
throw cam_workflow_info
}
cam_workflow_info = "sendmail"
......@@ -185,7 +187,7 @@ try {
// 检查料号是否能够check out
if(GEN.checkInout({job:job,mode:"test"}) != 0 && mode == "aimdfm"){ throw "the job check" }
GEN.checkInout({job:job,mode:"out"});
script_info({ msg: "analysis start" ,result_severity:"info"})
script_info({ msg: "开始分析客户料号" ,result_severity:"info"})
script_info({ progress: 65 })
var pcs_step = par.pcs_step == "" ? "cad" : par.pcs_step;
var array_step = par.array_step == "" ? "stp" : par.array_step;
......@@ -197,7 +199,7 @@ try {
pcs_step = step_list[0]
}
script_info({ msg: "analysis update_matrix_info" })
script_info({ msg: "分析上传matrix信息",result_severity:"info" })
script_info({ progress: 65 })
var matrix = UPLOAD_LAYER_MATRIX({job:job}) // 分析matrix 获得分析后的matrix信息
GEN.openStep({job:job, name:pcs_step})
......@@ -253,7 +255,7 @@ try {
})
GEN.clearLayers()
script_info({ msg: "analysis drill_stack" })
script_info({ msg: "分析钻孔叠构" })
script_info({ progress: 70 })
// * new 钻孔叠构
var cam_drill_structure = []
......@@ -378,7 +380,7 @@ try {
var analysis_obj = analysis({job:job,jobId:JobId,pcs_step:pcs_step,array_step:array_step,matrix:matrix})
// 创建profile
var tmp_matrix = GEN.getMatrix({job:job})
script_info({ msg: "analysis panel_info" })
script_info({ msg: "分析profile" })
script_info({ progress: 70 })
// * profile 和 拼版
var pandle_step = step_list.map(function(v){
......@@ -452,7 +454,7 @@ try {
}
ALL.gold_fingers = gold_fingers
GEN.closeStep()
script_info({ msg: "analysis some_job_info" })
script_info({ msg: "分析料号信息" })
var config = {
jobInfo: {
layer_count: ["signal","power_ground"], // Board属性的signal或者power_ground层
......@@ -532,7 +534,7 @@ try {
console.log("=================================> 5 save drill info")
script_info({ msg: "analysis drill_info" })
script_info({ msg: "分析钻孔信息" })
script_info({ progress: 75 })
// * 获取pcs_step 和 array_step的钻孔信息
var drill_tool_info = {};
......@@ -657,7 +659,7 @@ try {
})
console.log("=============================> 6 set smd bga")
script_info({ msg: "analysis smd&bga" })
script_info({ msg: "分析smd和bga" })
script_info({ progress: 80 });
step_list.forEach(function(step){
GEN.openStep({job:job,name:step})
......@@ -808,7 +810,7 @@ try {
// jobpath = "/home/local_db/server_db/jobs/"+job
// }
mkPath(jobpath,["user","opcam","steps"])
script_info({ msg: "analysis signal" })
script_info({ msg: "分析线路" })
script_info({ progress: 85 })
stepList.forEach(function(step){
GEN.openStep({ job: job, name: step })
......@@ -961,7 +963,7 @@ try {
if(par.erf){
tmpitem.erf = par.erf
}
script_info({ msg: "analysis run_signal_chk" })
script_info({ msg: "运行线路分析checklist" })
createChklistAndRun({ // 创建checklist并运行
layers: signalLayers,
items: [tmpitem]
......@@ -987,7 +989,6 @@ try {
GEN.closeStep()
})
mvOutProfile({job:job, step:pcs_step})
IKM.msg("end wait for save")
// 保存
......@@ -1019,7 +1020,6 @@ try {
})
});
script_info({ msg: "analysis export" })
script_info({ progress: 95 })
// 导出
if(par.export_path != "" && par.export_mode != "" && par.export_submode != "" ){
......@@ -1256,8 +1256,7 @@ function getMatrixInfo(props){ // 获取matrix各种信息
res.mBoardLayer.push(key)
switch (value.layer_type) {
case "signal":
s.mSignal[key] = value
res.mSignal[key] = value
res.mSignals.push(value)
break;
case "drill":
......
ats/topcam/ATS_AIM_data_input.js
View file @ cae41a62
......@@ -94,7 +94,7 @@ if(cam_workflow_info){
IKM.save_job_info({jobid:JobId, jobinfohash:{cam_workflow_info:""}})
}
try {
script_info({ msg: "import start", result_severity:"info" })
script_info({ msg: "开始导入", result_severity:"info" })
var par = PAR;
// var db_path = db.query("",function(q){
// return q.selectValue({
......@@ -104,7 +104,9 @@ try {
// })
// });
// if(_.isEmpty(db_path)){throw "quote-data-upload error"}
if(!par.path || par.path == "") {throw "path error"}
if(!par.path || par.path == "") {
script_info({ msg: "资料路径不存在", result_severity:"error" });
throw "path error"}
if(!par.hasOwnProperty("config_path") || par.config_path==""){
console.log("===================cfg");
par.config_path = "cam/input_data"
......@@ -120,7 +122,9 @@ try {
where:{id : JobId}
})
});
if(_.isEmpty(db_customer)){throw "customer error"}
if(_.isEmpty(db_customer)){
script_info({ msg: "该料号客户不存在", result_severity:"error" });
throw "customer error"}
if(db_customer && !(/^done$/ig.test(db_customer)) && db_customer != "" ){
par.customer = db_customer
}
......@@ -132,9 +136,13 @@ try {
where:{path : par.config_path}
})
});
if (!cfg || cfg == ""){throw "cfg can not find"}
if (!cfg || cfg == ""){
script_info({ msg: "客户配置不存在", result_severity:"error" });
throw "cfg can not find"}
var config = eval(cfg);
if(!config.hasOwnProperty("customer")){throw "config error"}
if(!config.hasOwnProperty("customer")){
script_info({ msg: "客户配置不存在", result_severity:"error" });
throw "config error"}
var job = Job;
if(_.isEmpty(job)) throw "没有传入料号名!";
job = job.toLowerCase()
......@@ -146,7 +154,9 @@ try {
var step = custCfg.step.toLowerCase()
// 获取路径下文件信息
var path = par.path
if(!fs.exists(path)){throw "path error"}
if(!fs.exists(path)){
script_info({ msg: "资料路径不存在", result_severity:"error" });
throw "path error"}
var pathInfo = fs.listDir(path + "/" + db_customer.toLowerCase(), 1)
// 判断存不存在料号文件
// var vc_position = db.query("",function(q){
......@@ -161,7 +171,9 @@ try {
// job_file_baseName = job_file_baseName + "_" + vc_position
// }
var jobFile = pathInfo.filter(function(v){return v.baseName.toLowerCase() == job_file_baseName})
if(jobFile.length == 0){throw "job file is not exist"}
if(jobFile.length == 0){
script_info({ msg: "资料路径不存在", result_severity:"error" });
throw "job file is not exist"}
var jobFiles = [] // 记录要分析的文件
if (!jobFile[0].isDir) {
jobFiles.push(jobFile[0])
......@@ -197,7 +209,7 @@ try {
// 分析料号文件 得到料号导入信息 导入类型
var jobInfo = analyJobFiles({jobFiles:jobFiles.filter(function(v){return v.isFile}),custCfg:custCfg,config:config,job:job })
if(jobInfo.data.length == 0){
script_info({ msg: "file error", result_severity:"error" })
script_info({ msg: "未找到料号文件", result_severity:"error" });
throw "file error"}
var importOk = false; // 是否成功导入
......@@ -288,15 +300,23 @@ try {
gerberCfg.step = step
return gerberCfg
})
GEN.COM("input_manual_reset")
gerberInfo.forEach(function(v){
GEN.COM("input_result_reset,step=,category=warnings,close_tab=yes")
GEN.COM("input_create,path="+v.path)
GEN.COM("input_selected_reset")
GEN.COM("input_selected_add,path="+v.path)
GEN.COM("input_identify_selected,path=,job="+job+",script_path=,gbr_ext=no,drl_ext=no,gbr_units=auto,drl_units=auto,unify=yes,break_sr=yes,gbr_wtp_filter=*,drl_wtp_filter=*,gbr_wtp_units=auto,drl_wtp_units=auto,wtp_dir=,have_wheels=yes,wheel=,gbr_consider_headlines=yes,drl_consider_headlines=yes,board_size_x=0,board_size_y=0")
GEN.COM("input_manual_reset")
import_info.push({name:v.layer, type:"gerber274x", date:now(),user:$.user_name})
GEN.COM("input_manual_set",v)
})
GEN.COM("input_manual")
})
importOk = true
}
if(!importOk){ script_info({ msg: "import error",result_severity:"error" }); throw "import error"}
if(!importOk){ script_info({ msg: "导入错误",result_severity:"error" }); throw "import error"}
script_info({ progress: 20 })
reNameStep(job)
if(/2171/.test(par.customer)){
......@@ -351,7 +371,7 @@ try {
import_html += "</table>"
// name type date user
resultData.push({type: "info",title:"导入资料列表",detail: [{ desc: import_html }] })
script_info({ msg: "import ok" })
script_info({ msg: "导入资料成功" })
if (mode === "aimdfm") {
$.QDfm.updateRow({
table: "pdm_aimdfm_task",
......@@ -458,6 +478,7 @@ function analyJobFiles(props){
}
}
}
function importJob(props,delSameJob){
var name = props.name
if (GEN.isJobExists({ job: name })) {
......
ats/topcam/ATS_AIM_data_format.js → ats/topcam/ATS_AIM_layer_rename_and_sort.js
View file @ cae41a62
......@@ -102,11 +102,11 @@ try {
if(cam_workflow_info && cam_workflow_info != ""){
throw cam_workflow_info
}
script_info({ msg: "format start" ,result_severity:"info"})
script_info({ msg: "料号标准化流程开始" ,result_severity:"info"})
script_info({ progress: 35 })
var par = PAR;
if(!par.hasOwnProperty("config_path") || par.config_path==""){
console.log("==============cfg");
console.log("=========== ===cfg");
par.config_path = "cam/input_data"
};
var db_customer = db.query("",function(q){
......@@ -137,9 +137,13 @@ try {
var custCfg = config.customer[par.customer] // 获取客户配置
if(!custCfg){throw "config error"}
// 料号验证
if(!GEN.isJobExists({job:job})){ throw "job "+ job+ " is not exist" }
if(!GEN.isJobExists({job:job})){
script_info({ msg: "料号"+job+"不存在" ,result_severity:"error"})
throw "job "+ job+ " is not exist" }
if(!GEN.isJobOpen({job:job})){GEN.openJob({job:job})}
if(GEN.checkInout({job:job,mode:"test"}) != 0 && mode == "aimdfm"){ throw "the job check" }
if(GEN.checkInout({job:job,mode:"test"}) != 0 && mode == "aimdfm"){
script_info({ msg: "料号"+job+" check" ,result_severity:"error"})
throw "the job check" }
console.log("Checkout====== ========================>")
GEN.checkInout({job:job,mode:"out"});
console.log("Checkout success==============================>")
......@@ -260,7 +264,7 @@ try {
var after_sort_matrix = ret.sortNames
// 改名
script_info({ msg: "format rename" ,result_severity:"info"})
script_info({ msg: "开始改名" ,result_severity:"info"})
script_info({ progress: 50 })
err = reName({job:job, matrix:after_sort_matrix, cfg:format_cfg})
if(err){throw err}
......@@ -383,7 +387,7 @@ try {
GEN.closeJob({job:job});
GEN.COM("open_job,job="+job);
script_info({ msg: "format create profile" ,result_severity:"info"})
script_info({ msg: "准备创建profile" ,result_severity:"info"})
script_info({ progress: 55 })
var all_layer = Object.keys(tmp_matrix)
// 没有outline层
......@@ -429,6 +433,8 @@ try {
}
}
script_info({ msg: "料号标准化结束" ,result_severity:"warn"})
db.query("",function(q){
return q.updateRow({
table:'pdm_job',
......@@ -482,7 +488,6 @@ catch (e) {
// subject:db_customer + ' / '+Job+ " format error",
// content:_.toString(e)
// })
Status = 'error';
resultData.push({type: "error", title: "脚本执行出错!", detail: [{desc: _.toString(e)}]});
return (mode === "aimdfm") ? {status: Status, result_data: resultData} : "Error";
......
ats/topcam/config_ats.js
View file @ cae41a62
......@@ -68,9 +68,9 @@
},
"Gerber274x_4": {
"nf1": 2,
"nf2": 3,
"nf2": 4,
"units": "mm",
"zeroes": "none",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
......@@ -80,7 +80,7 @@
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
......
public_script/SEC_DRC_analysis.js
View file @ cae41a62
......@@ -109,7 +109,7 @@ try {
// var ($signal,@signal,@pg_layer,$pg_layer,@drill,@sm_layer,@ss_layer,$ss_layer);
var matrix = GEN.getMatrix({job:job});
for (var layer in matrix) {
var layerInfo = matrix[layer]
var layerInfo = matrix[layer];
if(layerInfo.context == "board") {
if(layerInfo.layer_type == 'signal' && /(cil)|(col)/.test(layer)){
var lyr_paras = {};
......
public_script/scotttest.js
View file @ cae41a62
......@@ -11,73 +11,9 @@ PARAMETER:
},
{
name : 'outline',
title : 'outline',
title : '外形层',
type : 'LineEdit',
property : {tool_tip : '目标outline,默认是ol'},
},
{
name : 'units',
title : '单位',
type : 'RadioBox',
property : {
size_policy:'Expanding,Fixed',
item_list:[
{name:'inch',text:'INCH'},
{name:'mm',text:'MM'},
],
tool_tip:'工作单位，未设定，默认为INCH'
},
pack : {row:1,column:1},
},
{
name : 'tmp_enlarge_ss',
title : '文字临时涨大辅助',
type : 'LineEdit',
property : {tool_tip : ''},
},
{
name : 'cover_layer_suffix',
title : '文字套层后缀',
type : 'LineEdit',
property : {tool_tip : ''},
},
{
name : 'silk_suffix',
title : '分离的文字层后缀',
type : 'LineEdit',
property : {tool_tip : ''},
},
{
name : 'text_height',
title : '文字最大高度',
type : 'LineEdit',
property : {tool_tip : ''},
},
{
name : 'ss_elarge_height',
title : '文字放大高度',
type : 'LineEdit',
property : {tool_tip : ''},
},
{
name : 'bk_suffix',
title : '备份层后缀',
type : 'LineEdit',
property : {tool_tip : ''},
},
{
name : 'select_lyr',
title : '选择层别',
type : 'RadioBox',
property : {
size_policy:'Expanding,Fixed',
item_list:[
{name:'yes',text:'Yes'},
{name:'no',text:'No'},
],
tool_tip:'未设定，默认为Yes'
},
pack : {row:1,column:1},
property : {tool_tip : '支持正则匹配'},
},
{
name : 'auto_save',
......@@ -100,7 +36,7 @@ PARAMETER:
HELP:
<html><body bgcolor="#DDECFE">
<font size="3" color="#003DB2"><p>功能简介</p></font>
<p> 标题 </p>
<p> 铺铜 </p>
<br>
<font size="3" color="#003DB2"><p>参数配置</p></font>
<p> step信息 </p>
......@@ -112,14 +48,11 @@ PARAMETER:
*/
//////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////
console.log("=============================:template");
console.log("==============================>template");
// 引入模块 包
var $ = require('topcam.scriptfunc').argv();
var fs = require('fs');
const { padStart } = require('lodash');
var _ = require('lodash');
require("topsin.genmath")
var genMath = new GenMath();
var mode = $.ikm ? "topcam" : "aimdfm";
var IKM = $.ikm;
if (IKM==undefined ) { IKM = require('topcam.ikm6')($) }
......@@ -127,1314 +60,209 @@ var GEN = $.gen;
var GUI = $.gui || {};
var Job = $.job || $.job_name;
var JobId = $.job_id;
var db = $.db || IKM.db
var db = $.db || IKM.db;
require("topsin.genmath");
var genMath = new GenMath();
var PAR = {}
if ($.par) { PAR = $.par } else if ($.hasOwnProperty('script_parameter')){ PAR = JSON.parse($.script_parameter); }
if ($.par) {
PAR = $.par
} else if ($.hasOwnProperty('script_parameter')){
PAR = JSON.parse($.script_parameter);
}
if (mode === "aimdfm") {
var database = require("topsin.database");
database.addConnection($.conf.database_conf, "DFM");
var QDfm = database.query("DFM");
$.QDfm = QDfm;
if ($.conf.product_type == "aimdfm") {
QDfm.updateRow({ table: "pdm_aimdfm_task", data: { current_process_title: $.process_title }, where: { id: $.task_id } });
}
}
var Status = 'ok';
var resultData = [];
var par = PAR;
var default_par = {
units:"mm",
ss_to_sm: 10, // 文字距离阻焊
ss_to_smd: 10, // 文字距离SMD
ss_to_bga: 10, // 文字距离bga
text_height: 1, // 文字最大高度
bk_suffix: "_bk", // 备份层后缀
silk_suffix: "_font", // 分离的文字层后缀
cover_layer_suffix: "_cover_tmp",
tol: 1,
select_lyr: "no",
step: "unit",
ss_elarge_height:2000,
tmp_enlarge_ss:700,
auto_save: "No",
outline: "ol"
}
for(var key in default_par){ if (!par.hasOwnProperty(key) || par[key] == ""){ par[key] = default_par[key] }}
var job = Job;
var outline = par.outline
var gui = new NewGUI(GUI);
if(!par.outline_size){
par.outline_size = par.units == 'inch' ? 7.87 : 200;
}
try {
if(_.isEmpty(job)){throw "参数job不存在"} else { job = job.toLowerCase() }
if(!GEN.isJobExists({job:job})){throw "料号"+job+"不存在"}
if(!GEN.isJobOpen({job:job})){ GEN.openJob({job:job}) }
if(mode == "aimdfm"){ if(GEN.checkInout({job:job,mode:"test"}) != 0){ throw "the job check" } else { GEN.checkInout({job:job,mode:"out"}) } }
var workstep = getWorkStep()
if(!Array.isArray(workstep)){throw "工作step错误"}
var err = slOptimize({workstep:workstep}) // 文字优化
if (err) {throw err}
// 保存
if(/yes/ig.test(par.auto_save)){GEN.checkInout({job:job,mode:"out"}); GEN.saveJob({ job: job });GEN.checkInout({job:job,mode:"in"});GEN.closeJob({job:job});} else {GEN.checkInout({job:job,mode:"in"})}
if (mode === "aimdfm") {
$.QDfm.updateRow({table: "pdm_aimdfm_task",data: {progress: 33.33},where: { id: $.task_id }});
if (GEN.hasError()) { Status = 'error';resultData.push({ type: "error", title: "GEN错误!", detail: [{ desc: _.join(GEN.STATUS, "\n") }] });
return {status: Status,result_data: resultData};
} else { resultData.push({ type: "info", title: "操作完成, 请注意检查!" }); return {status: Status,result_data: resultData}; }
}else { return "Done" }
} catch (e) {
IKM.msg(_.join(GEN.STATUS, "\n"));IKM.msg(e);Status = 'error';
resultData.push({type: "error", title: "脚本执行出错!", detail: [{desc: _.toString(e)}]});
return (mode === "aimdfm") ? {status: Status, result_data: resultData} : "Error";
}
// 创建套层
function createCoverLayer (props){
// 1. step过滤
var workstep = props.workstep;
// 2.过滤工作层
var work_layer = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
var matrix = GEN.getMatrix({job:job});
var layers = Object.keys(matrix).map(function(key){
var tmp ={};
tmp[key] = key;
return tmp
})
work_layer = gui.selectMultiple({title: "请先择工作层",list: layers,defaultvalue: work_layer,columns: 4,gen: GEN})
}
if(work_layer.length == 0 ) {return "没有先择layer"}
// 其他参数
var info = gui.showForm({
title : '请手动匹配以下信息',
showcheck : 1,gen:GEN,
defaultsize:[200,100],
ui: {
type: 'ScrollArea',
property: { widget_resizable: true, frame_shape: 'NoFrame', align: 'Top' },
child: {
type: 'VBoxLayout',
property: { margin: 2, spacing: 5, align: 'Top' },
pack: { stretch: 0 },
child:[{
type: "FormGridLayout",
property: { columns: 1, label_alignment: 'Top | Right', margin: 10, spacing: 20 },
pack: { stretch: 0 },
child:[{
name : 'ss_to_sm',
pack: { label: '文字距离阻焊(单边)' },
type : 'LineEdit',
units:par.units == 'inch' ? 'mil' : 'um',
setter: function(obj){ obj.setText() },
property: { enabled: true, value:par.ss_to_sm }
},
{
name : 'ss_to_smd',
pack: { label: '文字距离SMD(单边)' },
type : 'LineEdit',
setter: function(obj){ obj.setText() },
units:par.units == 'inch' ? 'mil' : 'um',
property: { value:par.ss_to_smd,enabled: true }
QDfm.updateRow({
table: "pdm_aimdfm_task",
data: {
current_process_title: $.process_title
},
{
name : 'ss_to_bga',
pack: { label: '文字距离BGA(单边)' },
setter: function(obj){ obj.setText() },
type : 'LineEdit',
value:par.ss_to_bga,
units:par.units == 'inch' ? 'mil' : 'um',
property: {value:par.ss_to_smd, enabled: true }
},
{
type: "stretch"
}]
}]
}
}
where: { id: $.task_id }
});
if(!info){throw "未填写参数"}
info = JSON.parse(JSON.stringify(info))
var matrix = GEN.getMatrix({job:job})
workstep.forEach(function(step){
GEN.openStep({job:job,name:step});
GEN.clearLayers();
GEN.affectedLayer({ mode:'all',affected:'no' });
GEN.units({ type:par.units} );
GEN.zoomHome();
work_layer.forEach(function(layer){
var cover_lyr = layer + par.cover_layer_suffix ;
var sm,outer ;
if ( GEN.isLayerExists({job:job,layer:cover_lyr}) ) { GEN.deleteLayer({job:job,layer:[cover_lyr]}) }
if (matrix[layer].side == 'top') {
sm = getLayer({layer_type:"solder_mask", context:"board", side:"top"})[0];
outer = getLayer({layer_type:"signal", context:"board", side:"top"})[0];
GEN.createLayer({job:job,layer:cover_lyr,context:'board',type:'document',before:layer,delete_exists:'yes'});
}else{
sm = getLayer({layer_type:"solder_mask", context:"board", side:"bottom"})[0];
outer = getLayer({layer_type:"signal", context:"board", side:"bottom"})[0];
GEN.createLayer({job:job,layer:cover_lyr,context:'board',type:'document',before:layer,delete_exists:'yes'});
}
if ( GEN.isLayerExists({job:job,layer:sm}) ) {
GEN.affectedLayer({affected:'yes',layer:[sm],clear_before:'yes'});
GEN.selectByFilter({polarity:'positive',profile:'all'});
GEN.selCopyOther({dest:'layer_name',target_layer:cover_lyr,invert:'no',size:2*info.ss_to_sm});
}
if ( GEN.isLayerExists({job:job,layer:outer}) ) {
GEN.affectedLayer({affected:'yes',layer:[outer],clear_before:'yes'});
GEN.selectByFilter({attribute:['.smd'],profile:'all'});
if ( GEN.getSelectCount() > 0 ){GEN.selCopyOther({dest:'layer_name',target_layer:cover_lyr,invert:'no',size:2*info.ss_to_smd});}
GEN.selectByFilter({attribute:['.bga'],profile:'all',});
if ( GEN.getSelectCount() > 0 ){GEN.selCopyOther({dest:'layer_name',target_layer:cover_lyr,invert:'no',size:2*info.ss_to_bga});}
}
if ( GEN.isLayerExists({job:job,layer:outline}) ) {
var outline_tmp = outline + '_tmp_tl';
GEN.copyLayer({source_job:job,source_step:step,source_layer:outline,dest_layer:outline_tmp,mode:'replace',invert:'no'}) ;
GEN.affectedLayer({affected:'yes',layer:[outline_tmp],clear_before:'yes'});
GEN.selectByFilter({feat_types:'line\;arc',polarity:'positive',profile:'all'});
if ( GEN.getSelectCount() > 0 ){ GEN.selChangeSym({symbol:'r'+par.outline_size}) }
GEN.copyLayer({source_job:job,source_step:step,source_layer:outline_tmp,dest_layer:cover_lyr,mode:'append',invert:'no'})
GEN.deleteLayer({job:job,layer:[outline_tmp],step:step});
}
})
})
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.clearLayers()
}
// 字符 和 文字框分开
function ssFrameSeparate (props) {
// 1. step过滤
var workstep = props.workstep;
// 2.过滤工作层
var work_layers = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
var matrix = GEN.getMatrix({job:job});
var layers = Object.keys(matrix).map(function(key){
var tmp ={};
tmp[key] = key;
return tmp
})
work_layers = gui.selectMultiple({defaultsize:[200,100],title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
}
if(work_layers.length == 0 ) {return "没有先择layer"}
var info = gui.showForm({
title : '请手动匹配以下信息',
showcheck : 1,gen:GEN,
defaultsize:[500,250],
ui: {
type: 'ScrollArea',
property: { widget_resizable: true, frame_shape: 'NoFrame', align: 'Top' },
child: {
type: 'VBoxLayout',
property: { margin: 2, spacing: 5, align: 'Top' },
pack: { stretch: 0 },
child:[{
type: "FormGridLayout",
property: { columns: 1, label_alignment: 'Top | Right', margin: 10, spacing: 20 },
pack: { stretch: 0 },
child:[{
name : 'text_height',
pack: {label : '文字最大高度'},
type : 'LineEdit',
setter: function(obj){ obj.setText() },
property: { value:par.text_height * 1000,enabled: true },
units:par.units == 'inch' ? 'mil' : 'um'
},{
name : 'type',
pack: { label: '类型' },
type : 'RadioBox',
property: { enabled: true,item_list:[{name : 'separate', text:'字框分离'},{name:"change",text:"字框切换"}]}
},
{
type: "stretch"
}]
}]
}
}
});
if(!info){throw "未填写参数"}
info = JSON.parse(JSON.stringify(info));
if(info.type == ""){info.type = "separate"}
var matrix = GEN.getMatrix({job:job})
workstep.forEach(function(step){
GEN.openStep({job:job,name:step});
GEN.clearLayers();
GEN.affectedLayer({ mode:'all',affected:'no'} );
GEN.units({ type:par.units });
GEN.zoomHome();
var layer_count = GEN.getLayerCount({job:job}) // IKM.get_jobinfo({jobid: JobId, jobinfo: "layer_count"})
GEN.COM('disp_off');
if (info["type"] == 'separate') {
work_layers.forEach(function(layer){
// 备份文字层
var bk = layer + par.bk_suffix;
GEN.copyLayer({source_job:job,source_step:step,source_layer:layer,dest_layer:bk,mode:'replace', invert:'no'})
// 分离出的文字层
var ss_text = layer + par.silk_suffix;
if (matrix[layer]["side"] == 'top') {
GEN.createLayer({job:job,layer:ss_text,context:'board',type:'document',before:layer,delete_exists:'yes'});
}else{
GEN.createLayer({job:job,layer:ss_text,context:'board',type:'document',after:layer,delete_exists:'yes'});
}
// 开始分离文字
GEN.affectedLayer({affected:'yes',layer:layer,clear_before:'yes'});
GEN.COM("filter_reset,filter_name=popup");
GEN.selectByFilter({feat_types:'line\;arc',polarity:'positive',profile:'all'});
if ( GEN.getSelectCount() > 0 ){
var ss_line_arc = layer + '_line_arc_tl_script';
selCopyOther({layer:ss_line_arc,delExist: true})
GEN.affectedLayer({affected:'yes',layer:ss_line_arc,clear_before:'yes'});
GEN.selChangeSym({symbol:'r0.2'});
GEN.COM("filter_reset,filter_name=popup");
GEN.selectByFilter({feat_types:'line',polarity:'positive',profile:'all'});
//将直线固定角度分离去除
var ss_line = layer + '_line_tl_script';
if ( GEN.getSelectCount() > 0 ){
selCopyOther({layer:ss_line,delExist: true})
GEN.affectedLayer({affected:'yes',layer:ss_line,clear_before:'yes'});
var angle = [];
var tol = 0.2;
if(GEN.GEN_TYPE == 'genesis'){
angle = [-180,-135,-90,-45,0,45,90,135];
}else{
angle = [0,45,90,135,180,225,270,315];
}
angle.forEach(function(angl){
if(GEN.GEN_TYPE == 'genesis'){
var min_angle = (angl-tol < -180) ? -180 : (angl-tol);
var max_angle = (angl+tol > 180) ? 180 : (angl+tol);
GEN.COM('filter_set',{filter_name:'popup',update_popup:'yes',slot:'line',slot_by:'angle',min_angle:min_angle,max_angle:max_angle});
}else{
GEN.COM('set_filter_angle',{direction:'ccw',max_angle:angl+tol,min_angle:angl-tol,slot:'lines'});
GEN.COM("adv_filter_set,ccw_rotations=,filter_name=popup,mirror=any,bound_box=no,active=yes,srf_values=no,srf_area=no,limit_box=no");
}
GEN.COM("filter_area_strt");
GEN.COM("filter_area_end,filter_name=popup,operation=select");
})
if ( GEN.getSelectCount() > 0 ){GEN.selDelete()}
}
if(GEN.isLayerExists({job:job,layer:ss_line})){
// 利用制作的套层
var cover_lyr = layer + par.cover_layer_suffix;
GEN.affectedLayer({affected:'yes',layer:[cover_lyr],clear_before:'yes'});
GEN.COM("filter_reset,filter_name=popup");
GEN.COM("filter_set,filter_name=popup,update_popup=no,include_syms=r*");
GEN.COM("filter_set,filter_name=popup,update_popup=no,exclude_syms=rect*");
GEN.COM("filter_area_strt");
GEN.COM("filter_area_end,filter_name=popup,layer=,operation=select,inside_area=no,intersect_area=no,area_type=none");
GEN.COM("filter_reset,filter_name=popup");
GEN.COM("sel_reverse");
var cover_lyr_2 = cover_lyr + '_tmp_tl';
var Status = 'ok';
var resultData = [];
if ( GEN.getSelectCount() > 0 ){
GEN.createLayer({job:job,layer:cover_lyr_2,delete_exists:'yes'});
GEN.selCopyOther({target_layer:cover_lyr_2,invert:'no'});
}
GEN.affectedLayer({affected:'yes',layer:[ss_line_arc],clear_before:'yes'});
GEN.selContourize();
if(GEN.GEN_TYPE == 'incam'){
GEN.COM("reset_filter_criteria,filter_name=,criteria=all");
}else{
GEN.COM("filter_atr_reset,filter_name=ref_select");
}
GEN.COM("sel_ref_feat,pads_as=shape,mode=touch,exclude_syms=,include_syms=,use=filter,f_types=line\;pad\;surface\;arc\;text,polarity=positive\;negative,layers="+ss_line);
var layer_tmp1 = layer + '_tmp1_tl';
if ( GEN.getSelectCount() > 0 ){
GEN.createLayer({job:job,layer:layer_tmp1,delete_exists:'yes'});
GEN.selMoveOther({target_layer:layer_tmp1,invert:'no'});
}
if(GEN.GEN_TYPE == 'incam'){
GEN.COM("reset_filter_criteria,filter_name=,criteria=all");
}else{
GEN.COM("filter_atr_reset,filter_name=ref_select");
}
GEN.COM("sel_ref_feat,pads_as=shape,mode=touch,exclude_syms=,include_syms=,use=filter,f_types=line\;pad\;surface\;arc\;text,polarity=positive\;negative,layers="+cover_lyr_2);
var layer_tmp2 = layer + '_tmp2_tl';
if ( GEN.getSelectCount() > 0 ){
GEN.createLayer({job:job,layer:layer_tmp2,delete_exists:'yes'});
GEN.selCopyOther({target_layer:layer_tmp2,invert:'no'});
}
GEN.COM("sel_clean_surface,max_fold_len=0,clean_size="+info.text_height+",clean_mode=x_and_y,accuracy=0");
if (GEN.isLayerExists({job:job,layer:"layer_tmp2"})) {
GEN.affectedLayer({affected:'yes',layer:[layer_tmp2],clear_before:'yes'});
if(GEN.GEN_TYPE == 'incam'){
GEN.COM("reset_filter_criteria,filter_name=,criteria=all");
}else{
GEN.COM("filter_atr_reset,filter_name=ref_select");
try {
var par = PAR;
var default_par = {
step: "unit.+",
step2:"unit",
auto_save: "No",
outline:"ol",
units:"mm"
}
GEN.COM("sel_ref_feat,pads_as=shape,mode=disjoint,exclude_syms=,include_syms=,use=filter,f_types=line\;pad\;surface\;arc\;text,polarity=positive\;negative,layers="+ss_line_arc);
if ( GEN.getSelectCount() > 0 ){
GEN.selMoveOther({target_layer:layer_tmp1,invert:'no'});
var jtg_inner_layer_avoid_copper = IKM.get_jobinfo({jobid:JobId, jobinfo:"jtg_inner_layer_avoid_copper"}) * 2000 - 200
for(var key in default_par){ // 设置默认属性
if (!par.hasOwnProperty(key) || par[key] == ""){
par[key] = default_par[key]
}
}
if (GEN.isLayerExists({job:job,layer:layer_tmp1})) {
GEN.affectedLayer({affected:'yes',layer:[layer_tmp1],clear_before:'yes'});
if(GEN.GEN_TYPE == 'incam'){
GEN.COM("reset_filter_criteria,filter_name=,criteria=all");
}else{
GEN.COM("filter_atr_reset,filter_name=ref_select");
if(_.isEmpty(Job)){throw "参数Job不存在"}
var job = Job.toLowerCase()
if(!GEN.isJobExists({job:job})){throw "料号"+job+"不存在"}
if(!GEN.isJobOpen({job:job})){ GEN.openJob({job:job}) }
if(mode == "aimdfm"){
if(GEN.checkInout({job:job,mode:"test"}) != 0){ throw "the job check" }
GEN.checkInout({job:job,mode:"out"});
}
GEN.COM("sel_ref_feat,pads_as=shape,mode=touch,exclude_syms=,include_syms=,use=filter,f_types=line\;pad\;surface\;arc\;text,polarity=negative,layers="+layer);
if ( GEN.getSelectCount() > 0 ){GEN.selDelete() };
GEN.affectedLayer({affected:'yes',layer:[layer],clear_before:'yes'});
if(GEN.GEN_TYPE == 'incam'){
GEN.COM("reset_filter_criteria,filter_name=,criteria=all");
}else{
GEN.COM("filter_atr_reset,filter_name=ref_select");
}
GEN.COM("sel_ref_feat,pads_as=shape,mode=touch,exclude_syms=,include_syms=,use=filter,f_types=line\;pad\;surface\;arc\;text,polarity=positive\;negative,layers="+layer_tmp1);
if ( GEN.getSelectCount() > 0 ){
GEN.selMoveOther({target_layer:ss_text,invert:'no'});
}
}
// 将文字属性挑选
GEN.COM("filter_reset,filter_name=popup");
GEN.selectByFilter({feat_types:'text'} );
if ( GEN.getSelectCount() > 0 ){
GEN.selMoveOther({target_layer:ss_text,invert:'no'});
}
delLayer([ss_line_arc,ss_line,cover_lyr_2,layer_tmp1,layer_tmp2]);
}
}
var steplist = GEN.getStepList({job:job})
steplist = steplist.filter(function(v){
var tmpreg = new RegExp(par.step,"ig")
return tmpreg.test(v)
})
}
GEN.COM("disp_on")
var ref_layers = work_layers.filter(function(layer){ return GEN.isLayerExists({job:job, layer:layer + par.silk_suffix}) }).map(function(layer){
return {
work_layer: layer,
ref_layer: layer + par.silk_suffix
}
if (steplist.length == 0 && par.step2) {
steplist = GEN.getStepList({job:job}).filter(function (v) {
var tmpreg = new RegExp(par.step2, "ig");
return tmpreg.test(v);
})
if(ref_layers.length > 0) {
ref_layers.forEach(function(layerInfo){
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.clearLayers()
var work_layer = layerInfo.work_layer;
var ref_layer = layerInfo.ref_layer;
IKM.msg(work_layer+"层字框分离");
GEN.workLayer({name:work_layer,display_number:1,clear_before:'yes'});
if(correct(work_layer)){ var tmp = work_layer; work_layer = ref_layer,ref_layer = tmp; }
GEN.displayLayer({name:ref_layer,number:2});
var flag = true;
IKM.msg("请选择需移动的文字或者的文字框，不需制作了请【左键框选空白处】")
while(flag){
var tmp_con = GEN.MOUSE({type:'r',text:"Please Select"});
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
if(GEN.getSelectCount() > 0){
if(correct(work_layer)){ var tmp = work_layer; work_layer = ref_layer,ref_layer = tmp; }
GEN.selSubstitute({tol:1,mode:'select'});
GEN.selMoveOther({target_layer:ref_layer,invert:'no'});
} else {
flag = false;
}
}
})
var rout = "ol-tz";
if(!GEN.isLayerExists({job:job, layer:rout})){
rout = par.outline
}
})
}
// 文字框按阻焊扩大
function slBoxOptimize(props){
// 1. step过滤
var workstep = props.workstep;
// 2.过滤工作层
var work_layers = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
var matrix = GEN.getMatrix({job:job});
var layers = Object.keys(matrix).map(function(key){
var tmp ={};
tmp[key] = key;
return tmp
})
work_layers = gui.selectMultiple({defaultsize:[200,100],title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
var tmp = rout + '_tmp'
if(!GEN.isLayerExists({job:job, layer:tmp})){
GEN.deleteLayer({job:job, layer:[tmp]})
}
if(work_layers.length == 0 ) {return "没有先择layer"}
var matrix = GEN.getMatrix({job:job})
workstep.forEach(function(step){
var units = par.units;
GEN.openStep({job:job,name:step});
GEN.units({ type:units });
GEN.COM( "sel_options,clear_mode=clear_after,display_mode=all_layers,area_inout=inside,area_select=select,select_mode=standard,area_touching_mode=exclude");
GEN.zoomHome();
var ref_layers = work_layers.filter(function(layer){ return GEN.isLayerExists({job:job, layer:layer + par.cover_layer_suffix}) }).map(function(layer){
return {
work_layer: layer,
ref_layer: layer + par.cover_layer_suffix
}
})
if(ref_layers.length > 0) {
ref_layers.forEach(function(layerInfo){ // {"work_layer":"gto","ref_layer":"gto_cover"}
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.clearLayers()
var work_layer = layerInfo.work_layer;
var ref_layer = layerInfo.ref_layer;
var tmp1 = 'tl_script_tmp1', tmp2 = "tl_script_tmp2";
delLayer([tmp1, tmp2]);
// 放大
var ref_pad = "tmp_ref_pad"; delLayer([ref_pad]);
GEN.createLayer({job:job,layer:ref_pad,context:'misc',type:'document'});
var flag = true;
IKM.msg(work_layer + "层：请选择需放大的文字框，不需制作了请【左键框选空白处】")
while(flag){
GEN.workLayer({name:work_layer,display_number:1,clear_before:'yes'});
GEN.displayLayer({name:ref_layer,number:2});
var tmp_con = GEN.MOUSE({type:'r',text:"Please Select"});
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
if(GEN.getSelectCount() > 0){
selCopyOther({layer: tmp1})
// 判断特殊倾斜情况
var layer_feature = GEN.getFeatures({job:job,step:step,layer:tmp1})
// [{"type":"line","xs":"2.6998077","ys":"3.321854","xe":"2.6998077","ye":"3.4104367","symbol":"r7","polarity":"positive","attributes":[]},{"type":"line","xs":"2.6998077","ys":"3.321854","xe":"2.8912643","ye":"3.321854","symbol":"r7","polarity":"positive","attributes":[]},{"type":"line","xs":"2.6998077","ys":"3.4104367","xe":"2.8912643","ye":"3.4104367","symbol":"r7","polarity":"positive","attributes":[]},{"type":"line","xs":"2.8912643","ys":"3.321854","xe":"2.8912643","ye":"3.4104367","symbol":"r7","polarity":"positive","attributes":[]}]
// 1.算出最长边的角度
var angle = getAngle(layer_feature)
if (angle %90 == 0) {angle = 0}
if (angle < 0){angle = 90 + angle}
// 求中心点
GEN.workLayer({name:ref_layer,display_number:1,clear_before:'yes'});
var layer_limits_tmp1 = GEN.getLayerLimits({job:job,step:step,layer:tmp1,units:units});
GEN.selectByFilter({area_rect:{x1:layer_limits_tmp1.xmin-0.01,y1:layer_limits_tmp1.ymin-0.01,x2:layer_limits_tmp1.xmax+0.01,y2:layer_limits_tmp1.ymax+0.01}});
selCopyOther({layer: "tmp_center"})
var layer_limits_tmp = GEN.getLayerLimits({job:job,step:step,layer:"tmp_center",units:units});
layer_limits_tmp.xc = layer_limits_tmp.xmin - 0 + layer_limits_tmp.xsize/2;
layer_limits_tmp.yc = layer_limits_tmp.ymin - 0 + layer_limits_tmp.ysize/2;
delLayer("tmp_center")
GEN.clearLayers()
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.affectedLayer({affected:'yes',layer:[work_layer,tmp1]})
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
// 更具角度将其旋转
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:layer_limits_tmp.xc,y_anchor:layer_limits_tmp.yc,angle:angle})
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.workLayer({name:ref_layer,display_number:1,clear_before:'yes'});
GEN.selectByFilter({area_rect:{x1:layer_limits_tmp1.xmin-0.01,y1:layer_limits_tmp1.ymin-0.01,x2:layer_limits_tmp1.xmax+0.01,y2:layer_limits_tmp1.ymax+0.01}});
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:layer_limits_tmp.xc,y_anchor:layer_limits_tmp.yc,angle:angle})
GEN.copyLayer({source_job:job,source_step:step,source_layer:tmp1,dest_layer:tmp2,mode:'replace',invert:'no'});
var text_tmp = 'tl_tmp_text';
GEN.copyLayer({source_job:job,source_step:step,source_layer:tmp1,dest_layer:text_tmp,mode:'replace',invert:'no'});
var layer_limits = GEN.getLayerLimits({job:job,step:step,layer:text_tmp,units:units});
layer_limits.xc = layer_limits.xmin - 0 + layer_limits.xsize/2;
layer_limits.yc = layer_limits.ymin - 0 + layer_limits.ysize/2;
var scalex=1,scaley=1;
GEN.affectedLayer({affected:'yes',layer:[ref_layer],clear_before:'yes'});
GEN.selectByFilter({area_rect:{x1:layer_limits.xmin-0.01,y1:layer_limits.ymin-0.01,x2:layer_limits.xmax+0.01,y2:layer_limits.ymax+0.01}});
if ( GEN.getSelectCount() > 0 ){
GEN.selCopyOther({target_layer:ref_pad,invert:'no'});
var layer_limits_pad = GEN.getLayerLimits({job:job,step:step,layer:ref_pad,units:units});
var feature = GEN.getFeatures({job:job,step:step,layer:tmp1,units:units});
var line_width = feature[0].symbol.slice(1) / 1000;
var tmp_ps = 0.004;
if (units == "mm"){tmp_ps = tmp_ps*25.4}
// {"layer_limits_pad":{"xmin":"68.6901125","ymin":"84.4900925","xmax":"73.310115","ymax":"86.5100925",
// "xsize":4.620002499999998,"ysize":2.019999999999996},"line_width":0.1778,
// "layer_limits":{"xmin":"68.486215","ymin":"84.2861925","xmax":"73.527","ymax":"86.714",
// "xsize":5.040785,"ysize":2.4278075,"xc":71.0066075,"yc":85.50009625}}
scalex = (Number(layer_limits_pad.xsize)+line_width*2+tmp_ps)/(layer_limits.xsize);
if(scalex < 1) {scalex = 1 }
scaley = (Number(layer_limits_pad.ysize)+line_width*2+tmp_ps)/(layer_limits.ysize);
if(scaley < 1) {scaley = 1 }
}
delLayer(text_tmp)
GEN.affectedLayer({affected:'yes',layer:[tmp1],clear_before:'yes'});
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor:layer_limits_tmp.xc,y_anchor:layer_limits_tmp.yc,x_scale:scalex,y_scale:scaley})
// {"mode":"anchor","oper":"scale","x_anchor":71.0066075,"y_anchor":85.50009625,"x_scale":1,"y_scale":1}
// 检查是否含单根线
// var tmp = 'tl-'+tmp1+'tmp1++';
// var _tmp2 = 'tl-'+tmp1+'tmp2++';
// var tmp3 = 'tl-'+tmp1+'-alone';
// var cale_x = scalex; // ?
// var cale_y = scaley; // ?
// GEN.createLayer({job:job,layer:tmp,context:'misc',type:'document',delete_exists:'yes'});
// GEN.createLayer({job:job,layer:tmp3,context:'misc',type:'document',delete_exists:'yes'});
// GEN.selCopyOther({target_layer:tmp,invert:'no'});
// GEN.affectedLayer({affected:'yes',mode:'single',layer:tmp,clear_before:'yes'});
// GEN.selContourize();
// GEN.DO_INFO("-t layer -e "+job+"/"+step+"/"+tmp+" -d FEAT_HIST");
// if (GEN.INFO_RESULT.gFEAT_HISTsurf > 0) {
// for(var i=1;i <= GEN.INFO_RESULT.gFEAT_HISTsurf;i++){
// GEN.createLayer({job:job,layer:_tmp2,context:'misc',type:'document',delete_exists:'yes'});
// GEN.affectedLayer({affected:'yes',mode:'single',layer:tmp,clear_before:'yes'});
// GEN.COM('sel_layer_feat',{operation:'select',layer:tmp,index:i});
// GEN.selCopyOther({target_layer:_tmp2,invert:'no'});
// GEN.affectedLayer({affected:'yes',mode:'single',layer:_tmp2,clear_before:'yes'});
// GEN.COM('sel_surf2outline',{width:1});
// GEN.COM('filter_reset',{filter_name:'popup'});
// GEN.selectByFilter({feat_types:'arc',polarity:'positive',profile:'all'});
// if (GEN.getSelectCount() > 0) {GEN.selDelete() } ;
// var feat = GEN.getFeatures({job:job,step:step,layer:_tmp2});
// var hash = {};
// for(var i=0;i < feat;i++){
// for(var k = i+1;k < feat.length; k++){
// if ((feat[i].xs == feat[k].xs && feat[i].ys == feat[k].ys) ||
// (feat[i].xs == feat[k].xe && feat[i].ys == feat[k].ye) ){
// if(!hash[i+'star']){hash[i+'star'] = {}}
// hash[i+'star'][x] = feat[i].xs;
// hash[i+'star'][y] = feat[i].ys;
// }
// if ((feat[i].xe == feat[k].xs && feat[i].ye == feat[k].ys) ||
// (feat[i].xe == feat[k].xe && feat[i].ye == feat[k].ye)) {
// if(!hash[i+'end']){hash[i+'end'] = {}}
// hash[i+'end'][x] = feat[i].xe;
// hash[i+'end'][y] = feat[i].ye;
// }
// }
// }
// if (Object.keys(hash).length == 0) {
// GEN.affectedLayer({affected:'yes',mode:'single',layer:tmp1,clear_before:'yes'});
// GEN.selRefFeat({layers:_tmp2,use:'filter',mode:'touch'});
// if ( GEN.getSelectCount() > 0 ){
// GEN.COM('sel_move_other',{target_layer:tmp3,invert:'no',dx:0,dy:0,size:0,x_anchor:0,y_anchor:0,rotation:0,mirror:'none'});
// var change_scal_x = (1 / cale_x).toFixed(3) - 0;
// var change_scal_y = (1 / cale_y).toFixed(3) - 0;
// GEN.affectedLayer({affected:'yes',mode:'single',layer:tmp3,clear_before:'yes'});
// GEN.selTransform({mode:'axis',oper:'scale',x_anchor:0,y_anchor:0,x_scale:change_scal_x,y_scale:change_scal_y});
// // {"mode":"axis","oper":"scale","x_anchor":0,"y_anchor":0,"x_scale":1,"y_scale":1}
// GEN.COM('sel_move_other',{target_layer:tmp1,invert:'no',dx:0,dy:0,size:0,x_anchor:0,y_anchor:0,rotation:0,mirror:'none'});
// GEN.deleteLayer({job:job,layer:tmp3,step:step});
// }
// }
// }
// GEN.deleteLayer({job:job,layer:_tmp2,step:step});
// GEN.deleteLayer({job:job,layer:tmp,step:step});
// }else{
// GEN.deleteLayer({job:job,layer:tmp,step:step});
// if (GEN.isLayerEmpty({job:job,step:step,layer:tmp3})) {
// GEN.deleteLayer({job:job,layer:tmp3,step:step});
// }
// }
// 转回去
GEN.clearLayers()
GEN.affectedLayer({affected:'yes',layer:[work_layer,tmp1,tmp2], clear_before:"yes"})
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:layer_limits_tmp.xc,y_anchor:layer_limits_tmp.yc,angle:360-angle})
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.workLayer({name:ref_layer,display_number:1,clear_before:'yes'});
if(GEN.isLayerExists({ job:job,step:step,layer:ref_pad})){GEN.affectedLayer({affected:'yes',layer:ref_pad})}
GEN.selectByFilter({area_rect:{x1:layer_limits_tmp1.xmin-0.01,y1:layer_limits_tmp1.ymin-0.01,x2:layer_limits_tmp1.xmax+0.01,y2:layer_limits_tmp1.ymax+0.01}});
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:layer_limits_tmp.xc,y_anchor:layer_limits_tmp.yc,angle:360-angle})
GEN.workLayer({name:tmp1,display_number:1,clear_before:'yes'});
GEN.displayLayer({name:work_layer,number:2});
if(!GEN.isLayerEmpty({ job:job,step:step,layer:ref_pad})){GEN.displayLayer({name:ref_layer,number:3})}
GEN.COM('disp_on');
if(GEN.isLayerExists({ job:job,step:step,layer:ref_pad})){GEN.deleteLayer({job:job, layer:ref_pad})}
var ans = GEN.PAUSE('Please Check...');
if(!/ok/ig.test(ans)){ throw "cancel" }
GEN.COM('disp_off');
var tmp_symbol = 'tl_script_tmp';
GEN.workLayer({name:tmp1,display_number:1,clear_before:'yes'});
GEN.COM('sel_all_feat');
GEN.COM( "sel_create_sym,symbol="+tmp_symbol+",x_datum=0,y_datum=0,delete=no,fill_dx=0.1,fill_dy=0.1,attach_atr=no,retain_atr=no" );
GEN.workLayer({name:work_layer,display_number:1,clear_before:'yes'});
GEN.selRefFeat({layers:tmp2,use:'filter',mode:'cover'});
GEN.COM( "sel_substitute,mode=substitute,symbol="+tmp_symbol+",tol="+par.tol+",x_datum=0,y_datum=0,dcode=0" );
GEN.selectByFilter({include_syms:tmp_symbol});
if ( GEN.getSelectCount() > 0 ){GEN.selBreak()};
GEN.COM('disp_on');
GEN.COM('truncate_layer', {layer :tmp1});
GEN.COM('truncate_layer', {layer :tmp2});
GEN.COM('disp_on');
GEN.COM('sel_clear_feat');
GEN.units({type:units});
} else {
flag = false;
}
}
})
}
})
if(GEN.isLayerExists({job:job, layer:"tmp_ref_pad"})){GEN.deleteLayer({job:job, layer:["tmp_ref_pad"]})}
}
// 文字放大
function slOptimize(props) {
var info = gui.showForm({
title : '请手动匹配以下信息',
showcheck : 1,gen:GEN,
defaultsize:[200,100],
ui: {
type: 'ScrollArea',
property: { widget_resizable: true, frame_shape: 'NoFrame', align: 'Top' },
child: {
type: 'VBoxLayout',
property: { margin: 2, spacing: 5, align: 'Top' },
pack: { stretch: 0 },
child:[{
type: "FormGridLayout",
property: { columns: 1, label_alignment: 'Top | Right', margin: 10, spacing: 20 },
pack: { stretch: 0 },
child:[{
name : 'font_symbol',
pack: { label: '文字symbol' },
type : 'LineEdit',
setter: function(obj){ obj.setText() },
units: 'um',
property: { enabled: true, value:200 }
},
{
name : 'tmp_enlarge_ss',
pack: { label: '文字作为辅助临时扩大' },
type : 'LineEdit',
units: 'um',
setter: function(obj){ obj.setText() },
property: { value:par.tmp_enlarge_ss,enabled: true }
},
{
name : 'font_height',
pack: { label: '字高(um)' },
type : 'LineEdit',
units: 'um',
setter: function(obj){ obj.setText() },
property: { value:par.ss_elarge_height,enabled: true }
},
{
type: "stretch"
}]
}]
}
}
});
if(!info){throw "未填写参数"}
info = JSON.parse(JSON.stringify(info))
var font_height = info.font_height;
var font_symbol = info.font_symbol;
var tmp_enlarge_ss = info.tmp_enlarge_ss;
// 1. step过滤
var workstep = props.workstep;
// 2.过滤工作层
var work_layers = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
var matrix = GEN.getMatrix({job:job});
var layers = Object.keys(matrix).map(function(key){
var tmp ={};
tmp[key] = key;
return tmp
var work_layers = Object.keys(matrix).filter(function(v) {
var layer_info = matrix[v];
return layer_info.context == "board" && layer_info.layer_type=="signal" && layer_info.side == "inner"
})
work_layers = gui.selectMultiple({defaultsize:[200,100],title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
}
if(work_layers.length == 0 ) {return "没有先择layer"}
var matrix = GEN.getMatrix({job:job})
workstep.forEach(function(step) {
steplist.forEach(function(step) {
GEN.openStep({job:job, name:step})
GEN.units({type:par.units})
GEN.COM( "sel_options,clear_mode=clear_after,display_mode=all_layers,area_inout=inside,area_select=select,select_mode=standard,area_touching_mode=exclude");
GEN.zoomHome();
work_layers.forEach(function(layer){
var font_layer = layer + par.silk_suffix;
GEN.workLayer({name:font_layer,display_number:2,clear_before:'yes'})
GEN.selChangeSym({symbol:"r" + font_symbol})
var tmp1 = font_layer + "_1";
var tmp2 = font_layer + "_2";
var tmp3 = font_layer + "_3";
var bk = font_layer + "_bk";
var bk2 = font_layer + "_ok";
var bk_tmp = font_layer + "_ok_tmp";
var bk_ok2 = font_layer + "_ok2";
[tmp1,tmp2,tmp3,bk,bk2,bk_tmp,bk_ok2].forEach(function(v){
if(GEN.isLayerExists({job:job, layer:v})){GEN.deleteLayer({job:job,layer:[v]})}
})
// GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:tmp1, mode:"replace"})
GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:tmp3, mode:"replace"})
GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:bk2, mode:"replace"})
// GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:bk, mode:"replace"})
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.selClearFeature()
// GEN.workLayer({name:tmp1,display_number:2,clear_before:'yes'})
// GEN.selChangeSym({symbol:"r0.1"})
// 利用tmp3 快速定位
GEN.workLayer({name:tmp3,display_number:2,clear_before:'yes'})
GEN.units({type:"mm"})
GEN.selChangeSym({symbol:"r" + tmp_enlarge_ss})
// 转铜皮 获取每一个铜皮的limits信息
GEN.selContourize()
var fast_features = GEN.getFeatures({job:job,step:step,layer:tmp3,options:"feat_index",surface:1,units:"mm"})
fast_features = featsToLimits(fast_features)
fast_features.forEach(function(item){
if(item.limit.xsize > item.limit.ysize) {
var k = font_height / (item.limit.ysize * 1000)
item.x_scale = k
item.y_scale = k
} else {
var k = font_height / (item.limit.xsize * 1000)
item.y_scale = k
item.x_scale = k
}
})
fast_features.forEach(function(item){
GEN.workLayer({name:bk2,display_number:2,clear_before:'yes'})
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+item.limit.xmin+",y=" + item.limit.ymin)
GEN.COM("filter_area_xy,x="+item.limit.xmax+",y=" + item.limit.ymax)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=yes")
if(GEN.getSelectCount() > 0 ) {
GEN.selMoveOther({target_layer:bk_tmp,invert:'no',dx:0,dy:0,size:0})
GEN.workLayer({name:bk_tmp,display_number:2,clear_before:'yes'})
var tmp_limitbk = GEN.getLayerLimits({job:job,step:step,layer:bk_tmp,units:'mm'})
tmp_limitbk.xc = Number(tmp_limitbk.xmin) + tmp_limitbk.xsize/2
tmp_limitbk.yc = Number(tmp_limitbk.ymin) + tmp_limitbk.ysize/2
tmp_limitbk.xsize = Number(tmp_limitbk.xsize)
tmp_limitbk.ysize = Number(tmp_limitbk.ysize)
var k;
var sym = 0;
var syms = GEN.getLayerSymsHist({job:job,step:step,layer:bk_tmp,options:'break_sr',units:'mm'})
for (var key in syms) {
var symInfo = syms[key];
if(symInfo.size){
var size = symInfo.size;
if(sym == 0){
sym = size
} else {
sym = size > sym? sym : size
}
}
}
if(tmp_limitbk.xsize > tmp_limitbk.ysize) {
k = (font_height-sym) / (tmp_limitbk.ysize * 1000 - sym)
} else {
k = (font_height-sym) / (tmp_limitbk.xsize * 1000 - sym)
}
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor: tmp_limitbk.xc,y_anchor: tmp_limitbk.yc,x_scale:k,y_scale:k})
GEN.selMoveOther({target_layer:bk_ok2,invert:'no',dx:0,dy:0,size:0})
}
})
// 框选
var flag = true;
IKM.msg(font_layer + "层：请选择需放大的文字，不需制作了请【左键框选空白处】")
var x_or_y = "x";
while(flag){
var bk2_tmp = bk2 + "_tmp"
GEN.workLayer({name:bk_ok2,display_number:1,clear_before:'yes'});
GEN.displayLayer({name:bk2, number:2});
GEN.displayLayer({name:font_layer, number:2});
var tmp_con = GEN.MOUSE({type:'r',text:"Please Select"});
GEN.workLayer({name:font_layer,display_number:1,clear_before:'yes'});
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
if(GEN.getSelectCount() > 0){
var info2 = gui.showForm({
title : '请手动匹配以下信息',
showcheck : 1,gen:GEN,
defaultsize:[200,100],
ui: {
type: 'ScrollArea',
property: { widget_resizable: true, frame_shape: 'NoFrame', align: 'Top' },
child: {
type: 'VBoxLayout',
property: { margin: 2, spacing: 5, align: 'Top' },
pack: { stretch: 0 },
child:[{
type: "FormGridLayout",
property: { columns: 1, label_alignment: 'Top | Right', margin: 10, spacing: 20 },
pack: { stretch: 0 },
child:[{
name : 'font_symbol',
pack: { label: '文字symbol' },
type : 'LineEdit',
setter: function(obj){ obj.setText() },
units: 'um',
property: { enabled: true, value:"200" }
},
{
name : 'x_or_y',
pack: { label: '文字方向' },
type : 'LineEdit',
setter: function(obj){ obj.setText() },
property: { value:x_or_y,enabled: true }
},
{
name: 'font_height',
pack: { label: '字高(um)' },
type: 'LineEdit',
units: 'um',
setter: function (obj) { obj.setText() },
property: {value: par.ss_elarge_height,enabled: true }
},
{
type: "stretch"
}]
}]
}
GEN.clearLayers()
GEN.workLayer({name:rout,display_number:2,clear_before:'yes'})
GEN.selectByFilter({profile:"in"})
if(GEN.getSelectCount() > 0) {
GEN.selMoveOther({target_layer:tmp,invert:'no',dx:0,dy:0,size:0})
GEN.workLayer({name:tmp,display_number:2,clear_before:'yes'});
(function(){
GEN.selRefFeat({layers:rout,use:"filter",mode:"touch"});
if(GEN.getSelectCount() > 0) {
GEN.selMoveOther({target_layer:rout,invert:'no',dx:0,dy:0,size:0})
arguments.callee()
}
})();
// 过滤外形线
if(!GEN.isLayerExists({job:job, layer:tmp + "2"})){
GEN.deleteLayer({job:job, layer:[tmp + "2"]})
}
GEN.COM("profile_to_rout,layer="+tmp + "2"+",width=1")
GEN.selRefFeat({layers:tmp + "2",use:"filter",mode:"touch"});
(function(){
GEN.selRefFeat({layers:rout,use:"filter",mode:"touch"});
if(GEN.getSelectCount() > 0) {
GEN.selMoveOther({target_layer:rout,invert:'no',dx:0,dy:0,size:0})
arguments.callee()
}
});
if(!info2){throw "未填写参数"}
info2 = JSON.parse(JSON.stringify(info2))
x_or_y = info2.x_or_y;
var font_height2 = info2.font_height;
var tmp_layer = font_layer + "_tmp";
selCopyOther({delExist:true,layer: tmp_layer})
GEN.workLayer({name:tmp_layer,display_number:1,clear_before:'yes'});
})();
GEN.deleteLayer({job:job, layer:[tmp + "2"]})
GEN.selAllFeat()
selCopyOther({delExist:true,layer: bk2_tmp})
GEN.workLayer({name:bk2,display_number:1,clear_before:'yes'});
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
if(GEN.getSelectCount() > 0) {
// 继续过滤
if(GEN.isLayerExists({job:job, layer:tmp+"_f"})){
GEN.deleteLayer({job:job, layer:[tmp + "_f"]})
}
GEN.selCopyOther({dest:'layer_name',target_layer:tmp + "_f",invert:'no',dx:0,dy:0,size:0})
GEN.workLayer({name:tmp + "_f",display_number:2,clear_before:'yes'})
GEN.COM("sel_cut_data,det_tol=25.4,con_tol=25.4,rad_tol=0,filter_overlaps=no,delete_doubles=no,use_order=yes,ignore_width=yes,ignore_holes=none,start_positive=yes,polarity_of_touching=same")
GEN.selRefFeat({layers:"drl",use:"filter",mode:"touch"})
if(GEN.getSelectCount() > 0) {GEN.selDelete()}
GEN.workLayer({name:tmp_layer,display_number:1,clear_before:'yes'});
var limits = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm"})
for (var key in limits) {
limits[key] = limits[key] - 0;
}
limits.xc = Number(limits.xmin) + limits.xsize/2
limits.yc = Number(limits.ymin) + limits.ysize/2
var sym = 0;
var syms = GEN.getLayerSymsHist({job:job,step:step,layer:tmp_layer,units:'mm'})
for (var key in syms) {
var symInfo = syms[key];
if(symInfo.size){
var size = symInfo.size;
if(sym == 0){
sym = size
} else {
sym = size > sym? sym : size
}
}
}
// 获取里面有几个字母 每一个字母的limits信息
GEN.selChangeSym({symbol:"r1"})
GEN.selContourize()
var feas = GEN.getFeatures({job:job,step:step,layer:tmp_layer,options:"feat_index",units:"mm"})
if(feas.length == 1) {
GEN.workLayer({name:bk2_tmp,display_number:2,clear_before:'yes'});
var k = (font_height2-sym) / ((x_or_y=="y"? limits.xsize : limits.ysize)* 1000 - sym)
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor:limits.xc,y_anchor:limits.yc,x_scale:k,y_scale:k})
GEN.selMoveOther({target_layer:bk2,invert:'no',dx:0,dy:0,size:0})
} else if (feas.length > 1) {
var limits_info = [];
feas.forEach(function(item) {
var index = item.index;
GEN.selLayerFeat({layer:tmp_layer, index:index,operation:"select"});
GEN.workLayer({name:tmp,display_number:2,clear_before:'yes'});
GEN.selRefFeat({layers:tmp + "_f",use:"filter",mode:"touch"})
GEN.selReverse()
if(GEN.getSelectCount() > 0) {
var tmp_l = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm", options:"select"})
for (var key in tmp_l) {
tmp_l[key] = tmp_l[key] - 0;
}
tmp_l.xc = Number(tmp_l.xmin) + tmp_l.xsize/2
tmp_l.yc = Number(tmp_l.ymin) + tmp_l.ysize/2
limits_info.push({index:index, limits:tmp_l })
GEN.selClearFeature()
}
})
var rodata = []
limits_info.forEach(function (item, i) {
if(limits_info[i+1]){
rodata.push(getRodate({
xs : item.limits.xc,
ys : item.limits.yc,
xe : limits_info[i+1].limits.xc,
ye : limits_info[i+1].limits.yc
}))
GEN.selMoveOther({target_layer:rout,invert:'no',dx:0,dy:0,size:0})
}
GEN.deleteLayer({job:job, layer:[tmp + "_f"]})
// 对单边>=20000um的闭合图形铺铜
// 将长度 >= 20000的线选出来 将跟此线xy坐标相同的线选出来拷贝到辅助层 cuttingdata 拷贝回去
if(GEN.isLayerExists({job:job, layer:tmp+"_2"})){
GEN.deleteLayer({job:job, layer:[tmp + "_2"]})
}
var feats = GEN.getFeatures({job:job,step:step,layer:tmp,units:"mm",options:"feat_index"})
feats.forEach(function(item){
if(item.type == "line") {
var len = Math.sqrt((item.xe-item.xs)*(item.xe-item.xs) + (item.ye-item.ys)*(item.ye-item.ys))
if(len >= 20) {
GEN.selLayerFeat({layer:tmp,index:item.index,operation:"select"})
if(GEN.getSelectCount() > 0) {GEN.selMoveOther({target_layer:tmp+"_2",invert:'no',dx:0,dy:0,size:0})}
}
} else if (item.type == "arc") {
var len = genMath.arcLength(item)
if(len >= 20) {
GEN.selLayerFeat({layer:tmp,index:item.index,operation:"select"})
if(GEN.getSelectCount() > 0) {GEN.selMoveOther({target_layer:tmp+"_2",invert:'no',dx:0,dy:0,size:0})}
}
}
})
if(GEN.isLayerExists({job:job, layer:tmp+"_2"})){
(function(){
GEN.workLayer({name:tmp,display_number:2,clear_before:'yes'});
GEN.selRefFeat({layers:tmp+"_2",use:"filter",mode:"touch"})
if(GEN.getSelectCount() > 0) {
GEN.selMoveOther({target_layer:tmp+"_2",invert:'no',dx:0,dy:0,size:0})
arguments.callee()
}
})()
GEN.workLayer({name:tmp+"_2",display_number:2,clear_before:'yes'});
GEN.selCopyOther({dest:'layer_name',target_layer:rout,invert:'no'})
GEN.COM("sel_cut_data,det_tol=25.4,con_tol=25.4,rad_tol=0,filter_overlaps=no,delete_doubles=no,use_order=yes,ignore_width=yes,ignore_holes=none,start_positive=yes,polarity_of_touching=same")
// 拷贝到负层
work_layers.forEach(function(l){
GEN.selCopyOther({dest:'layer_name',target_layer:l,invert:'no',dx:0,dy:0,size:-500})
})
var angle = rodata.reduce(function(a,b) {return a + b}) / rodata.length;
if (Math.abs(angle) < 10) { angle = 0 }
GEN.workLayer({name:bk2_tmp,display_number:2,clear_before:'yes'});
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:limits.xc,y_anchor:limits.yc,angle:angle})
// 按照中心放大
var limits2 = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm"})
for (var key in limits) {
limits2[key] = limits2[key] - 0;
}
limits2.xc = limits2.xmin + limits2.xsize/2
limits2.yc = limits2.ymin + limits2.ysize/2
if(limits2.xsize > limits2.ysize) {
var k = (font_height2 - sym) / ((x_or_y=="y"? limits2.xsize : limits2.ysize)* 1000 - sym)
limits2.x_scale = k
limits2.y_scale = k
} else {
var k = (font_height2 - sym) / ((x_or_y=="y"? limits2.xsize : limits2.ysize)* 1000 - sym)
limits2.y_scale = k
limits2.x_scale = k
GEN.deleteLayer({job:job, layer:[tmp + "_2"]})
}
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor:limits2.xc,y_anchor:limits2.yc,x_scale:limits2.x_scale,y_scale:limits2.y_scale})
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:limits.xc,y_anchor:limits.yc,angle:360 - angle})
GEN.selMoveOther({target_layer:bk2,invert:'no',dx:0,dy:0,size:0})
}
GEN.deleteLayer({job:job, layer:[tmp_layer]})
} else {
flag = false
}
if(GEN.isLayerExists({job:job, layer:bk2_tmp})) {
GEN.deleteLayer({job:job, layer:[bk2_tmp]})
}
}
GEN.PAUSE("check")
// 将ok的移动到文字层
GEN.clearLayers()
GEN.workLayer({name:font_layer,display_number:2,clear_before:'yes'});
GEN.selDelete();
GEN.clearLayers()
GEN.affectedLayer({affected:"yes", layer:[bk2, bk_ok2]})
GEN.selMoveOther({target_layer:layer,invert:'no',dx:0,dy:0,size:0});
[tmp1,tmp2,tmp3,bk,bk2,font_layer,bk_ok2, layer+cover_layer_suffix].forEach(function(v){
if(GEN.isLayerExists({job:job, layer:v})){GEN.deleteLayer({job:job,layer:[v]})}
})
})
})
}
function selCopyOther(props){ // {layer , invent, dx, dy , size}
if(GEN.getSelectCount()>0){ if(!props || !props.layer){return}
if(props.delExist){if(GEN.isLayerExists({job:job, layer:props.layer})){GEN.deleteLayer({job:job, layer:[props.layer]})}}
GEN.selCopyOther({dest:'layer_name',target_layer:props.layer,invert:props.invert || 'no',dx:props.dx || 0,dy:props.dy || 0,size:props.size || 0})
}
}
function getLayer(props){
if(!props){return}
if(!props.context){props.context = "board"}
GEN.workLayer({name:tmp,display_number:2,clear_before:'yes'})
GEN.selMoveOther({target_layer:rout,invert:'no',dx:0,dy:0,size:0})
GEN.displayLayer({name:rout, number:1})
GEN.deleteLayer({job:job, layer:[tmp]})
// 删除+++
var matrix = GEN.getMatrix({job:job})
return Object.keys(matrix).reduce(function(a,b){
var info = matrix[b];
var ret = true;
for (var key in props) { if(!Array.isArray(props[key])){props[key] = [props[key]]}
if(info[key] && props[key].indexOf(info[key]) < 0){ ret = false } }
if(ret){ a.push(props.res == "info"? info : b) } return a
},[])
}
function NewGUI (gui) {
this.msgBox = function(props){ // title type content button
props = props || {}
return gui.msgBox(props.title || "title",props.type || "info",props.content || "content",props.button || ["ok", "cancel"]);
}
this.selectFromTreeview = gui.selectFromTreeview
this.confirm = function(props) {
props = props || {}
return gui.confirm(props.content || "content",props.button || ["yes", "no"], props.type || "question");
}
this.selectFile = function(props){ // "choose something", "*", true, "file", "/home/abby/fast_io"
props = props || {}
return gui.selectFile(props.title || "choose something",props.filter || "*",props.multiple || false, "file","");
}
this.selectSingle = function(props) {
props = props || {}
return gui.selectSingle({
"title": props.title || "select",
"list": props.list || [],
"default": props["default"] || "",
"columns": props.columns || 2,
"gen":props.gen || GEN
});
}
this.selectMultiple = function(props) {
props = props || {}
return gui.selectMultiple({
"title": props.title || "select",
"list": props.list || [],
"defaultvalue": props["defaultvalue"] || [""],
"defaultsize": props["defaultsize"] || [200, 100],
"columns": props.columns || 2,
"gen":props.gen || GEN
});
}
this.selectFromTable = gui.selectFromTable
this.snapScreen = gui.snapScreen
this.imageViewer = gui.imageViewer
this.inputBox = gui.inputBox
this.showForm = gui.showForm
this.selectLayer = function(props){
props = props || {}
return gui.selectLayer({
title: props.title || "请选择层",
filter: props.filter || ".*", // regular expression
selectmode: props.selectmode || "multiple", // single, multiple
context: props.context || "all", // all, board, misc
layertype: props.layertype || "signal", // default type of layertypelist
defaultsize: props.defaultsize || [600, 400], // window size
layermatrix: props.layermatrix || props.matrix,
layertypelist: props.layertypelist || [
{name: "all", display_name: "all", filter: function(x) { return x }},
{name: "signal", display_name: "signal", filter: function(x) { return x["layer_type"] === "signal"; }},
{name: "power_ground", display_name: "power_ground", filter: function(x) { return x["layer_type"] === "power_ground"; }},
{name: "mixed", display_name: "mixed", filter: function(x) { return x["layer_type"] === "mixed"; }},
{name: "solder_mask", display_name: "solder_mask", filter: function(x) { return x["layer_type"] === "solder_mask"; }},
{name: "silk_screen", display_name: "silk_screen", filter: function(x) { return x["layer_type"] === "silk_screen"; }},
{name: "solder_paste", display_name: "solder_paste", filter: function(x) { return x["layer_type"] === "solder_paste"; }},
{name: "drill", display_name: "drill", filter: function(x) { return x["layer_type"] === "drill"; }},
{name: "rout", display_name: "rout", filter: function(x) { return x["layer_type"] === "rout"; }},
{name: "document", display_name: "document", filter: function(x) { return x["layer_type"] === "document"; }}
],
gen: props.GEN || GEN
})
}
this.lockUnlockLayer = function(props){
props = props || {}
var tmp = {}
if (props.matrix) {
for (var key in props.matrix) {
var item = props.matrix[key]
tmp[key] = {
row : item.row,
name : item.name
}
Object.keys(matrix).forEach(function(v) {
if(/\+\+\+$/.test(v)){
GEN.deleteLayer({job:job, layer:[v]})
}
}
return gui.lockUnlockLayer({
title: props.title || "lockUnlockLayer",
layermatrix:props.layermatrix || tmp
})
}
this.passwordBox = function(props){
props = props || {}
return gui.passwordBox({title:props.title || "password", password:props.password || "1212"})
}
this.selectJobLayer = function (props) {
props = props || {}
return gui.selectJobLayer({
layertypelist: props.layertypelist || [
{name: "all", display_name: "all", filter: function(x) { return x }},
{name: "signal", display_name: "signal", filter: function(x) { return x["layer_type"] === "signal"; }},
{name: "power_ground", display_name: "power_ground", filter: function(x) { return x["layer_type"] === "power_ground"; }},
{name: "mixed", display_name: "mixed", filter: function(x) { return x["layer_type"] === "mixed"; }},
{name: "solder_mask", display_name: "solder_mask", filter: function(x) { return x["layer_type"] === "solder_mask"; }},
{name: "silk_screen", display_name: "silk_screen", filter: function(x) { return x["layer_type"] === "silk_screen"; }},
{name: "solder_paste", display_name: "solder_paste", filter: function(x) { return x["layer_type"] === "solder_paste"; }},
{name: "drill", display_name: "drill", filter: function(x) { return x["layer_type"] === "drill"; }},
{name: "rout", display_name: "rout", filter: function(x) { return x["layer_type"] === "rout"; }},
{name: "document", display_name: "document", filter: function(x) { return x["layer_type"] === "document"; }}
],
//defaultlayertype: "ha",
joblist: props.joblist || [],
defaultJob: props.defaultJob || [], // select by default
steplist: props.steplist || [],
// defaultstep: "step3",
showstep: props.showstep || true,
selectmode: props.selectmode || "multiple", // single/multiple
layermatrix: props.layermatrix || { },
defaultlayer: props.defaultlayer || []
})
}
}
function getWorkStep(props){
var steplists = GEN.getStepList({job:job});
if(steplists.length == 0){return "该料号没有step"}
var steps_tmp = steplists.filter(function(name){
var reg = new RegExp(par.step, "ig")
return reg.test(name)
})
if(steplists.length == 0){return "根据脚本参数过滤出来的step不存在，请检查资料或者脚本参数配置！"}
var workstep = gui.selectMultiple({
title: "请先择工作step",
size:[200,100],
defaultsize:[200,100],
list: steplists.map(function(v){ var tmp = {}; tmp[v] = v ;return tmp}),
defaultvalue: steps_tmp,
columns: 1,
gen: GEN
})
if(workstep.length == 0 ) {return "没有先择step"}
return workstep
}
function delLayer(layer){
if(!Array.isArray(layer)){
layer = [layer]
}
layer = layer.filter(function(v){return GEN.isLayerExists({job:job, layer:v})})
if(layer.length){
GEN.deleteLayer({job:job, layer:layer})
}
}
function correct(work_layer){
var tmp = GEN.getWorkLayer();
return tmp !== work_layer;
}
function getAngle(features){ // 获取最长边的角度
features.sort(function(a,b){
a.length = getLineLength(a);
b.length = getLineLength(b);
return a.length - b.length
})
return getRodate(features[features.length - 1])
}
function getLineLength (line){
if (line.type != "line"){return 0}
return Math.sqrt((line.xe - line.xs)*(line.xe - line.xs) + (line.ye - line.ys)*(line.ye - line.ys))
}
function getRodate(props){
var xs = props.xs;
var ys = props.ys;
var xe = props.xe;
var ye = props.ye;
var y = ye - ys;
var x = xe - xs;
var r = Math.atan(y / x)
return r*180/Math.PI
}
function sameDirection(xory, type, res, indexes) {
for (var key in xory) {
var current = -1;
var data = xory[key];
data.sort(function(a,b){return a[type] - b[type]})
data.forEach(function(item, i){
if (i > current){
var ret = [item];
current = searchFont(item, data, i, ret,type)
if(ret.length > 1) {
ret.forEach(function(item) {
indexes = indexes.filter(function(item2){
return item2.index != item.index
})
})
res.push(ret.reduce(function(a,b){
if(Number(b.limit.xmin) < Number(a.xmin)){
a.xmin = b.limit.xmin
}
if(Number(b.limit.ymin) < Number(a.ymin)){
a.ymin = b.limit.ymin
}
if(Number(b.limit.xmax) > Number(a.xmax)){
a.xmax = b.limit.xmax
}
if(Number(b.limit.ymax) > Number(a.ymax)){
a.ymax = b.limit.ymax
}
return a
},{
xmin: item.limit.xmin,
ymin: item.limit.ymin,
xmax: item.limit.xmax,
ymax: item.limit.ymax
}))
}
}
})
}
return indexes
}
function searchFont(l ,arr, i, ret, type){
if(arr[i+1]){
var len = Math.abs(l[type] - arr[i+1][type])
if(len <= 1.5){
ret.push(arr[i+1])
return searchFont(arr[i+1], arr, i+1, ret, type)
} else {return i}
// 保存
if(/yes/ig.test(par.auto_save)){
GEN.checkInout({job:job,mode:"out"}) // 结束保存料号 关闭料号
GEN.saveJob({ job: job });
GEN.checkInout({job:job,mode:"in"})
GEN.closeJob({job:job})
} else {
GEN.checkInout({job:job,mode:"in"})
}
return i+1
}
function turnFix(data) {
return parseFloat(data).toFixed(1)
}
function surfaceAnalysis(props){
props.limit.xmin = props.limit.xmin - 0;
props.limit.ymin = props.limit.ymin - 0;
props.limit.xmax = props.limit.xmax - 0;
props.limit.ymax = props.limit.ymax - 0;
props.limit.xsize = props.limit.xsize - 0;
props.limit.ysize = props.limit.ysize - 0;
props.xc = props.limit.xsize / 2 + props.limit.xmin
props.yc = props.limit.ysize / 2 + props.limit.ymin
}
// function featsToLimits(feats) {
// feats.forEach(function(item) {
// if(item.feats) {
// var polygon = genMath.profile2Polygon(item.feats.join("\n"),0)
// var res = polygon.reduce(function(a,b){
// a.xmin = b.x > a.xmin ? a.xmin : b.x;
// a.ymin = b.y > a.ymin ? a.ymin : b.y;
// a.xmax = b.x < a.xmax ? a.xmax : b.x;
// a.ymax = b.y < a.ymax ? a.ymax : b.y;
// return a
// }, {
// xmin: polygon[0].x,
// ymin: polygon[0].y,
// xmax: polygon[0].x,
// ymax: polygon[0].y
// })
// res.xsize = Math.abs(res.xmax - res.xmin)
// res.ysize = Math.abs(res.ymax - res.ymin)
// res.xc = res.xmin + res.xsize/2
// res.yc = res.ymin + res.ysize/2
// item.limits = res
// item.limit = res
// }
// })
// return feats
// }
function featsToLimits(feats) {
feats.forEach(function(item) {
if(item.feats) {
var polygon = profile2Polygon(item.feats)
var res = polygon.reduce(function(a,b){
a.xmin = b.x > a.xmin ? a.xmin : b.x;
a.ymin = b.y > a.ymin ? a.ymin : b.y;
a.xmax = b.x < a.xmax ? a.xmax : b.x;
a.ymax = b.y < a.ymax ? a.ymax : b.y;
return a
}, {
xmin: polygon[0].x,
ymin: polygon[0].y,
xmax: polygon[0].x,
ymax: polygon[0].y
})
res.xsize = Math.abs(res.xmax - res.xmin)
res.ysize = Math.abs(res.ymax - res.ymin)
res.xc = res.xmin + res.xsize/2
res.yc = res.ymin + res.ysize/2
item.limits = res
item.limit = res
if (mode === "aimdfm") {
$.QDfm.updateRow({table: "pdm_aimdfm_task",data: {progress: 33.33},where: { id: $.task_id }});
if (GEN.hasError()) {
Status = 'error';resultData.push({ type: "error", title: "GEN错误!", detail: [{ desc: _.join(GEN.STATUS, "\n") }] });
return {status: Status,result_data: resultData};
} else {
resultData.push({ type: "info", title: "操作完成, 请注意检查!" });
return {status: Status,result_data: resultData};
}
})
return feats
}
function profile2Polygon(feat) {
var info = [];
feat.forEach(function(v){
if (/^#O. ([\S]+) ([\S]+)/.test(v)) {
info.push({
x: RegExp.$1 - 0,
y: RegExp.$2 - 0
})
}else {
return "Done"
}
})
return info
} catch (e) {
IKM.msg(_.join(GEN.STATUS, "\n"))
IKM.msg(e)
Status = 'error';
resultData.push({type: "error", title: "脚本执行出错!", detail: [{desc: _.toString(e)}]});
return (mode === "aimdfm") ? {status: Status, result_data: resultData} : "Error";
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment