Skip to content

S
Scott
Commit c876d2dd authored by Scott Sun's avatar Scott Sun
Browse files
Options

Merge branch 'master' of http://gitlab.topibd.net/scott.sun/scott

parents 25054115 904c607d
Hide whitespace changes
Inline Side-by-side
Showing with 156 additions and 44 deletions
ats/analysis/ATS_AIM_customer_data_analysis.js
View file @ c876d2dd
......@@ -165,23 +165,24 @@ try {
vc_card_size_l: {api:"vc_card_size", props:"ysize"}, // card长边尺寸 // ? 保留小数
vc_array_size_w: {api:"vc_array_size", props:"xsize"}, // ! array短边尺寸 需要arr_step // ? 保留小数
vc_array_size_l: {api:"vc_array_size", props:"ysize"}, // ! array长边尺寸 需要arr_step // ? 保留小数
vc_pcs_count_on_panel: true, // todo array中pcs的数量 ! 需要arr_step
vc_pcs_count_on_panel: true, // array中pcs的数量 ! 需要arr_step
stack_vias_number: true, // via孔连续叠加的层数
stack_vias_more: {only_value:true}, // yes|no : 14层板以上时，Stack Vias >=12时,存yes // ! 需要分析完via连续叠加层数
depth_drilling: {api:"layer_exist", props:"depth_drill"}, // yes|no :存在depth_drill 层时 ,存yes
depth_routing: {api:"layer_exist", props:"depth_routing"}, // tmp yes|no :存在depth_routing 层时，,存yes
laser_via_on_buried_hole: true, // todo via孔在埋孔上时，存yes
depth_drilling: {api:"layer_exist", props:"depth_drill"}, // yes|no :存在 depth_drill 层时 ,存yes
depth_routing: {api:"layer_exist", props:"depth_routing"}, // tmp yes|no :存在 depth_routing 层时，,存yes
laser_via_on_buried_hole: true, // via孔在埋孔上时，存yes
milling_bit_size: true, // todo 检查array中pcs的最小间距值
milling_length: true, // todo 检查array中铣切长度
vc_src_01005_pad_result: {api:"board_has_attr", props:"01005_pad"}, // * yes|no：board 层中检查存在01005属性物件时，存yes 这里先拿.smd代替了
ATS_technology_25dc: {api:"layer_exist", props:"cavity"}, // yes|no：存在cavity层别时存yes
ATS_technology_25dr: {api:"layer_exist", props:"cavity"}, // yes|no：存在cavity层别时存yes
vc_src_01005_pad_result: {api:"board_has_attr", props:"01005_pad"},
vc_src_EDGE_PLATING: {api:"layer_exist2", props:["fab_page2"]}, // fab_page2
ATS_technology_25dc: {api:"layer_exist", props:["bend","top_coverlay"]}, // yes|no：存在cavity层别时存yes
ATS_technology_25dr: {api:"layer_exist", props:"nclegend-1-2"}, // yes|no：存在cavity层别时存yes
vc_src_EDGE_PLATING: true, // yes|no：检查线路外形是否存在物件，存在则存yes // !料号需要有rout层
edge_plating_length: true, // todo 检查线路外形处物件的长度
glod_finger: true, // todo yes|no：暂无逻辑
glod_finger_area: true, // todo 暂无逻辑
solder_mask_side: true, // top|bot|both:检查防焊层所在面次 solder_mask_side
silk_screen_side: true, // top|bot|both:检查文字层所在面次
ATS_sm_side: true, // top|bot|both:检查防焊层所在面次 ATS_sm_side
vc_id_print_side: true, // top|bot|both:检查文字层所在面次 vc_id_print_side
min_drl_size: true, // todo 0.5mm 最小圆孔
max_pth_drl_size: true, // todo 3.5mm 最大pth圆孔
max_npth_drl_size: true, // todo 6.0mm 最大npth圆孔
......@@ -376,6 +377,42 @@ try {
var oChecklistName = "mychecklist"
var signalLayers = analysis_obj.matrixInfo.mSignals.map(function(v){return v.name})
var drillLayers = analysis_obj.matrixInfo.mDrills.map(function(v){return v.name})
console.log("=============================> 13 save card_copper_distribution")
var copper_distribution_steplist= [pcs_step, array_step];
copper_distribution_steplist.forEach(function(step){
if(step){
GEN.openStep({ job: job, name: step })
// 铜面积 分step
var copper_percent_tmp = signalLayers.map(function(v){
var tmp = {layer:v}
tmp.copper_percent = GEN.copperArea({layer1:v}).percent + "%"
return tmp
})
console.log("================ ==signalLayers============"+_.toString(signalLayers));
console.log(_.toString(copper_percent_tmp));
copper_percent_tmp.forEach(function(item){
var save_info = {
jobid: JobId,
layer: item.layer,
}
if(/^cad/ig.test(step)){
save_info.layerinfohash = {
card_copper_distribution: item.copper_percent
}
} else if(/^stp/ig.test(step)){
save_info.layerinfohash = {
array_copper_distribution: item.copper_percent
}
}
save_layerinfo(save_info)
})
GEN.closeStep()
}
})
var info = {
min_line_width: ["line","user_nor_line"],
min_line_spacing: ["l2l"],
......@@ -482,25 +519,8 @@ try {
})
})
// 铜面积
console.log("=============================> 13 save copper_percent")
var copper_percent_pcs = signalLayers.map(function(v){
var tmp = {layer:v}
tmp.copper_percent = GEN.copperArea({layer1:v}).percent + "%"
return tmp
})
console.log("================ ==signalLayers============"+_.toString(signalLayers));
console.log(_.toString(copper_percent_pcs));
GEN.closeStep()
copper_percent_pcs.forEach(function(item){
save_layerinfo({
jobid: JobId,
layer: item.layer,
layerinfohash: {
copper_percent: item.copper_percent
}
})
})
})
// 保存
......@@ -841,6 +861,13 @@ function analysis(props){
return GEN.getProfileLimits({job:this.job,step:this.array_step,units:"mm"})[props].toFixed(2)
}
T_m_p.prototype.analysis_vc_pcs_count_on_panel = function(props){ //
if(!this.array_step){return "_error"}
var has_step = has_steps({job:this.job, pcs_step:this.pcs_step ,array_step:this.array_step}) // 有无拼版关系
if(has_step){
// arr 中 pcs数量
var tmp = GEN.getRepeat({job:job, step:array_step})
return tmp.length
}
return "_todo"
}
T_m_p.prototype.analysis_stack_vias_number = function(props){ // via孔连续叠加的层数
......@@ -918,11 +945,67 @@ function analysis(props){
t.jobInfo.laser_info = laser_info;
return res
}
T_m_p.prototype.analysis_layer_exist2 = function(props){ // 存在某某层？ string
var layers = Object.keys(this.matrixInfo.matrix)
if(/string/ig.test(typeof(props))){
return layers.indexOf(props) >= 0 ? "yes" : "unknow"
} else {
var res = "unknow"
props.forEach(function(v){
if(layers.indexOf(v)>=0){
res = "yes"
}
})
return res
}
}
T_m_p.prototype.analysis_layer_exist = function(props){ // 存在某某层？ string
return this.matrixInfo.matrix.hasOwnProperty(props) ? "yes" : "no"
var layers = Object.keys(this.matrixInfo.matrix)
if(/string/ig.test(typeof(props))){
return layers.indexOf(props) >= 0 ? "yes" : "no"
} else {
var res = "no"
props.forEach(function(v){
if(layers.indexOf(v)>=0){
res = "yes"
}
})
return res
}
}
T_m_p.prototype.analysis_laser_via_on_buried_hole = function(){ // todo
return "_todo"
T_m_p.prototype.analysis_laser_via_on_buried_hole = function(){ // via孔在埋孔上
var t = this
// 找出 镭射孔 机械孔
var laser_layers = []
var buried_hole = []
for (var key in t.matrix) {
var val = t.matrix[key]
if(val.type == "laser_drill"){
laser_layers.push(val)
} else if(val.type == "blind_drill" || val.type == "bury_drill"){
buried_hole.push(val)
}
}
var res = "no"
if(buried_hole.length>0 && laser_layers.length){ // 有机械孔 和镭射
GEN.openStep({job:t.job,name:t.pcs_step})
GEN.affectedLayer({affected:'no',mode:'all'})
try {
laser_layers.forEach(function(laser){
GEN.workLayer({name:laser,display_number:2,clear_before:'yes'})
GEN.selClearFeature()
buried_hole.forEach(function(buried){
GEN.selRefFeat({layers:buried,use:'filter',mode:'touch'})
if(GEN.getSelectCount()>0){
res = "yes"
throw "yes"
}
})
})
} catch (msg) { }
GEN.closeStep()
}
return res
}
T_m_p.prototype.analysis_milling_bit_size = function(){ // todo
return "_todo"
......@@ -977,35 +1060,35 @@ function analysis(props){
T_m_p.prototype.analysis_glod_finger_area = function(){ // todo
return "_todo"
}
T_m_p.prototype.analysis_solder_mask_side = function(){ // 检查防焊层所在面次
T_m_p.prototype.analysis_ATS_sm_side = function(){ // 检查防焊层所在面次
var solder_paste_layers = this.matrixInfo.matrixVal.filter(function(v){return v.layer_type == "solder_mask"})
var solder_paste_info= solder_paste_layers.map(function(v){return v.side}).reduce(function(a,b){
if(a.indexOf(b)<0){ a.push(b) }
return a
},[])
var res = "none"
var res = "NONE"
if(solder_paste_info.length == 0){
res = "none"
res = "NONE"
} else if (solder_paste_info.length == 1) {
res = /top/ig.test(solder_paste_info[0]) ? "top" : "bot"
res = /top/ig.test(solder_paste_info[0]) ? "FRONT1" : "BACK1"
} else {
res = "both"
res = "FRONT1_BACK1"
}
return res
}
T_m_p.prototype.analysis_silk_screen_side = function(){ // 检查文字层所在面次
T_m_p.prototype.analysis_vc_id_print_side = function(){ // 检查文字层所在面次
var solder_mask_layers = this.matrixInfo.matrixVal.filter(function(v){return v.layer_type == "solder_paste"})
var solder_mask_info= solder_mask_layers.map(function(v){return v.side}).reduce(function(a,b){
if(a.indexOf(b)<0){ a.push(b) }
return a
},[])
var res = "none"
var res = "NA"
if(solder_mask_info.length == 0){
res = "none"
res = "NA"
} else if (solder_mask_info.length == 1) {
res = /top/ig.test(solder_mask_info[0]) ? "top" : "bot"
res = /top/ig.test(solder_mask_info[0]) ? "FRONT" : "BACK"
} else {
res = "both"
res = "FRONT / BACK"
}
return res
}
......@@ -1668,4 +1751,12 @@ function createOutline(props){
return false
}
}
function has_steps(props){
var job = props.job
var pcs_step = props.pcs_step
var array_step = props.array_step
var res = GEN.getSubSteps({job:job, step:array_step})
return res.indexOf(pcs_step) >= 0
}
\ No newline at end of file
config_ats.js
View file @ c876d2dd
......@@ -267,6 +267,8 @@
}
],
"tl_name": [
{"orig_name" : ["top_enig"], "tl_name" : "top_enig" },
{"orig_name" : ["bot_enig"], "tl_name" : "bot_enig" },
{"orig_name" : ["^spt$","^past_top$"], "tl_name" : "past_top" },
{"orig_name" : ["^spb$","^past_botm$"], "tl_name" : "past_botm" },
{"orig_name" : ["^sst$","^silk_top$"], "tl_name" : "silk_top" },
......@@ -547,6 +549,7 @@
}
},
"data_format": [
{"tl_name":"top_enig" , "new_name":"top_enig" , "attr":{ "context":"board", "type":"mixed" }},
{"tl_name":"past_top" , "new_name":"past_top" , "attr":{ "context":"board", "type":"solder_paste" }},
{"tl_name":"silk_top" , "new_name":"silk_top" , "attr":{ "context":"board", "type":"silk_screen" }},
{"tl_name":"sm_top" , "new_name":"sm_top" , "attr":{ "context":"board", "type":"solder_mask" }},
......@@ -556,6 +559,7 @@
{"tl_name":"sm_botm" , "new_name":"sm_botm" , "attr":{ "context":"board", "type":"solder_mask" }},
{"tl_name":"silk_bot" , "new_name":"silk_bot" , "attr":{ "context":"board", "type":"silk_screen" }},
{"tl_name":"past_botm" , "new_name":"past_botm" , "attr":{ "context":"board", "type":"solder_paste" }},
{"tl_name":"bot_enig" , "new_name":"bot_enig" , "attr":{ "context":"board", "type":"mixed" }},
{"tl_name":"d_(\\d+)-(\\d+)","new_name":"d($1)-($2)" ,"attr":{"context":"board","type":"drill"}},
{"tl_name":"drill","new_name":"drill" ,"attr":{"context":"board","type":"drill"}},
{"tl_name":"rout","new_name":"rout" ,"attr":{"context":"board","type":"rout"}},
......
test/scott_test.js
View file @ c876d2dd
......@@ -62,17 +62,34 @@ try {
if(!GEN.isJobExists({job:job})){ throw "job "+ job+ " is not exist" }
if(!GEN.isJobOpen({job:job})){GEN.openJob({job:job})}
var matrix = GEN.getMatrix({job:job})
var signalLayers = Object.keys(matrix).filter(function(v){return matrix[v].layer_type == "signal"})
var signalLayers = Object.keys(matrix).filter(function(v){
var val = matrix[v]
return val.layer_type == "signal" && val.context == "board"
})
var step = "cad"
GEN.openStep({job:job, name:step})
var copper_percent_pcs = signalLayers.map(function(v){
var tmp = {layer:v}
tmp.copper_percent = GEN.copperArea({layer1:v}).percent + "%"
tmp.card_copper_distribution = GEN.copperArea({layer1:v}).percent + "%"
return tmp
})
console.log("==================================>card copper_percent_pcs:"+_.toString(copper_percent_pcs))
var arr_step = "stp"
GEN.openStep({job:job, name:arr_step})
var copper_percent_stp = signalLayers.map(function(v){
var tmp = {layer:v}
tmp.array_copper_distribution = GEN.copperArea({layer1:v}).percent + "%"
return tmp
})
console.log("==================================>copper_percent_pcs:"+_.toString(copper_percent_pcs))
console.log("==================================>card copper_percent_stp:"+_.toString(copper_percent_stp))
QDfm.updateRow({
table: "pdm_aimdfm_task",
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment