Skip to content

S
Scott
Commit c463b267 authored by Scott Sun's avatar Scott Sun
Browse files
Options

scott

parents bf61f734 171681b2
Hide whitespace changes
Inline Side-by-side
Showing with 1600 additions and 437 deletions
ats/topcam/20200922_yucca.md 0 → 100644
View file @ c463b267
104: d xx - xx -np
\ No newline at end of file
ats/topcam/ATS_AIM_customer_data_analysis.js
View file @ c463b267
......@@ -135,8 +135,7 @@ var resultData = [];
var ALL = {}
var Omatrix = {};
try {
script_info({ result_severity: "analysis start" })
script_info({ progress: 65 })
console.log("=============================================>anaysis_start");
var par = PAR;
var vc_src_01005_pad_result = par.vc_src_01005_pad_result
......@@ -151,6 +150,8 @@ try {
// 检查料号是否能够check out
if(GEN.checkInout({job:job,mode:"test"}) != 0){ throw "the job check" }
GEN.checkInout({job:job,mode:"out"});
script_info({ result_severity: "analysis start" })
script_info({ progress: 65 })
var pcs_step = par.pcs_step == "" ? "cad" : par.pcs_step;
var array_step = par.array_step == "" ? "stp" : par.array_step;
var step_list = GEN.getStepList({job:job})
......@@ -174,6 +175,7 @@ try {
if(GEN.getSelectCount()>0){
// unSelect()
// if(GEN.getSelectCount() > 0){
// GEN.COM("cur_atr_reset")
// GEN.COM("cur_atr_set,attribute=.drill,option=via")
// GEN.COM("sel_change_atr,mode=add")
// }
......@@ -195,6 +197,7 @@ try {
if(GEN.getSelectCount()>0){
// unSelect()
// if(GEN.getSelectCount() > 0){
// GEN.COM("cur_atr_reset")
// GEN.COM("cur_atr_set,attribute=.drill,option=plated")
// GEN.COM("sel_change_atr,mode=add")
// }
......@@ -203,6 +206,7 @@ try {
if(GEN.getSelectCount() > 0){
// unSelect()
// if(GEN.getSelectCount() > 0){
// GEN.COM("cur_atr_reset")
// GEN.COM("cur_atr_set,attribute=.drill,option=non_plated")
// GEN.COM("sel_change_atr,mode=add")
// }
......@@ -2105,6 +2109,7 @@ function min_symbols_anal(props){ // 分析最 symbols
GEN.workLayer({name:solderL_tmp,display_number:2,clear_before:"yes"})
GEN.selContourize()
GEN.COM("sel_cont2pad,match_tol=0,restriction=,min_size=5,max_size=100,suffix=+++")
GEN.COM("cur_atr_reset")
GEN.COM("cur_atr_set,attribute=.smd")
GEN.COM("sel_change_atr,mode=add")
var ck = "tmp_chk"
......@@ -2251,6 +2256,7 @@ function all_bga_min_pitch_anal(props){ // 分析所有bga中间距最小的
GEN.workLayer({name:solder_layer_tmp,display_number:2,clear_before:"yes"})
GEN.selContourize()
GEN.COM("sel_cont2pad,match_tol=0,restriction=,min_size=5,max_size=100,suffix=+++")
GEN.COM("cur_atr_reset")
GEN.COM("cur_atr_set,attribute=.smd")
GEN.COM("sel_change_atr,mode=add")
var ck = "tmp_chk"
......
ats/topcam/ATS_AIM_layer_rename_and_sort.js
View file @ c463b267
......@@ -221,9 +221,7 @@ try {
if(ret.err){throw err}
var after_sort_matrix = ret.sortNames
// 设置钻孔
err = setDrill({job:job, matrix:after_sort_matrix})
if(err){throw err}
// 改名
script_info({ result_severity: "format rename" })
......@@ -231,6 +229,11 @@ try {
err = reName({job:job, matrix:after_sort_matrix, cfg:format_cfg})
if(err){throw err}
// 设置钻孔
err = setDrill({job:job})
if(err){throw err}
var tmp_matrix = GEN.getMatrix({job:job})
// 钻孔名称再次更改
......@@ -250,6 +253,7 @@ try {
if (ftdrill_layer[ftdrill_layer.length-1]!= v){
GEN.matrixMoveRow({ job:job,layer:"ftdrill",after:ftdrill_layer[ftdrill_layer.length-1] })
}
hasMainDrill = !hasMainDrill
} else if(chabie>1 && chabie < layer_count - 1){
// 改名
GEN.renameLayer({job:job,layer:v,new_name:v.substr(0,v.length-1)})
......@@ -272,6 +276,7 @@ try {
createOutline({job:job, step:tmp_step, matrix: tmp_matrix, profileRule:profileRule})
var hasProfile = GEN.getProfile({job:job, step:tmp_step})
if(hasProfile.match(/\n/ig).length == 1){
script_info({ result_severity: "创建profile失败" })
throw "创建profile失败"
}
} else {
......@@ -452,15 +457,15 @@ function sortLayer(props){ // 排序方法 {job:要排序的料号, rule: {要
function setDrill(props){ // 设置钻孔
var job = props.job
var matrix = props.matrix
var matrix = _.values(GEN.getMatrix({job:job}))
// 获取所有的钻孔层
var drillLayer =matrix.filter(function(v){
return (v.attr.type == "drill" || v.attr.type == "rout") && v.attr.context == "board"
return (v.layer_type == "drill" || v.layer_type == "rout") && v.context == "board"
})
// 获取所有single层
var signalLayer =matrix.filter(function(v){
return v.attr.type == "signal" && v.attr.context == "board"
return v.layer_type == "signal" && v.context == "board"
})
console.log("=================>setdrill:drillLayer:" + _.toString(drillLayer));
console.log("=================>setdrill:signalLayer:" + _.toString(signalLayer));
......@@ -473,10 +478,10 @@ function setDrill(props){ // 设置钻孔
}
function doDrill(drills){ // 分析钻孔层
return drills.map(function(v){
if(v.tl_name == "drill" || v.tl_name=="rout" || v.tl_name=="outline"){
if(v.name == "drill" || v.name=="rout" || v.name=="outline"){
return {start:findSignal(1), end:findSignal(layerCount), layer:v.name}
} else {
var tmp = /(\d+)-(\d+)/ig.exec(v.tl_name);
var tmp = /(\d+)-(\d+)/ig.exec(v.name);
if(tmp){
var start = findSignal(tmp[1]);
var end = findSignal(tmp[2]);
......@@ -504,12 +509,14 @@ function reName(props) { // 改名 par{job:要改名的料号, rule: {要改名
var new_name;
var tl_name = item.tl_name
var rule = item.rule
if(rule === tl_name){
new_name = item.new_name
} else {
var reg = new RegExp(rule,"ig")
var tmp = reg.exec(tl_name)
if(!tmp){return undefined}
// ["1","10","np"]
var replaceArr = tmp.slice(1)
new_name = item.new_name
var params = {}
......@@ -517,20 +524,21 @@ function reName(props) { // 改名 par{job:要改名的料号, rule: {要改名
params["$"+(i+1)] = replaceArr[i]
}
replaceArr.forEach(function(v,i){
tl_name = tl_name.replace("($"+(i+1)+")",v)
new_name = new_name.replace("($"+(i+1)+")",v)
})
new_name = replaceTlName(new_name)
function replaceTlName(name){
var tmp = /(\([^)]*\))/ig.exec(name)
if(!tmp){ return name }
var param_arr = tmp[1].match(/\$\d+/ig)
var newname = tmp[1]
param_arr.forEach(function(v){
newname = newname.replace(new RegExp("\\"+v,"ig"), params[v])
})
newname = name.replace(tmp[1],eval(newname))
return replaceTlName(newname)
}
// new_name = replaceTlName(new_name)
// function replaceTlName(name){
// var tmp = /(\([^)]*\))/ig.exec(name)
// if(!tmp){ return name }
// var param_arr = tmp[1].match(/\$\d+/ig)
// var newname = tmp[1]
// param_arr.forEach(function(v){
// newname = newname.replace(new RegExp("\\"+v,"ig"), params[v])
// })
// newname = name.replace(tmp[1],eval(newname))
// return replaceTlName(newname)
// }
}
return {
orig_name: item.name,
......
ats/topcam/config_ats.js 0 → 100644
View file @ c463b267
(function(){return {
"formats": {
"ODB": {},
"ODB_1": {
"comments": "",
"arrStep": "stp",
"isMerge": "yes"
},
"Gerber274x_1": {
"nf1": 3,
"nf2": 4,
"units": "mm",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Gerber274x_2": {
"nf1": 3,
"nf2": 5,
"units": "inch",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Gerber274x_3": {
"nf1": 3,
"nf2": 5,
"units": "mm",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Gerber274x_4": {
"nf1": 2,
"nf2": 3,
"units": "mm",
"zeroes": "none",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Gerber274x_5": {
"nf1": 2,
"nf2": 3,
"units": "mm",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon1_1":{
"nf1": 3,
"nf2": 0,
"units": "mm",
"zeroes": "leading",
"decimal": "yes",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_1": {
"nf1": 3,
"nf2": 5,
"units": "mm",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_2": {
"nf1": 2,
"nf2": 3,
"units": "inch",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_3": {
"nf1": 2,
"nf2": 5,
"units": "inch",
"zeroes": "trailing",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_4": {
"nf1": 2,
"nf2": 3,
"units": "mm",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_5": {
"nf1": 2,
"nf2": 3,
"units": "mm",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_6": {
"nf1": 3,
"nf2": 4,
"units": "mm",
"zeroes": "leading",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "mm",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_7": {
"nf1": 3,
"nf2": 4,
"units": "inch",
"zeroes": "none",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"Excellon2_8": {
"nf1": 2,
"nf2": 5,
"units": "inch",
"zeroes": "none",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
},
"IPC356_1": {
"nf1": 2,
"nf2": 4,
"units": "inch",
"zeroes": "none",
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": "inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
},
"customer": {
"2171": {
"step": "cad",
"rules": [
{
"valid": function(props){
var file = props.file;
return /.+\.tgz$/ig.test(file.name)
},
"type": "ODB",
"format": "ODB"
},
{
"valid": function(props){
var file = props.file;
return /.+\.art$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_2",
"format_params": function(props){
var params = props.params
if(params.art_param){
var leading = params.art_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.art_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
var nf1,nf2
if(params.art_param.hasOwnProperty("FORMAT")){
var tmp = params.art_param["FORMAT"].split(".")
if(/\d+/ig.test(tmp[0])){nf1 = Number(tmp[0])}
if(/\d+/ig.test(tmp[1])){nf2 = Number(tmp[1])}
}
return {
"nf1": nf1 || 3,
"nf2": nf2 || 5,
"units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
},
{
"valid": function(props){
var file = props.file;
return /.+\.drl$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_1",
"format_params": function(props){
var params = props.params
if(params.nc_param){
var leading = params.nc_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.nc_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
return {
"nf1": params.nc_param["INTEGER_PLACES"]? Number(params.nc_param["INTEGER_PLACES"]) : 3,
"nf2": params.nc_param["DECIMAL_PLACES"]? Number(params.nc_param["DECIMAL_PLACES"]) : 5,
"units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": params.nc_param["COORDINATES"]? params.nc_param["COORDINATES"].toLowerCase() :"absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
},
{
"valid": function(props){
var file = props.file;
return /.+\.drd$/ig.test(file.name)
},
"type": "Excellon1",
"format": "Excellon1_1"
},
{
"valid": function(props){
var file = props.file;
return /.+\.phd$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_1"
}
],
"tl_name": [
{"orig_name" : ["top_enig","top-enig","enig_top"], "tl_name" : "enig_top" },
{"orig_name" : ["bot_enig","bot-enig","enig_bot"], "tl_name" : "enig_bot" },
{"orig_name" : ["top_paste","^spt$","^past_top$"], "tl_name" : "past_top" },
{"orig_name" : ["bottom_paste","^spb$","^past_botm$"], "tl_name" : "past_botm" },
{"orig_name" : ["top_silk","^sst$","^silk_top$"], "tl_name" : "silk_top" },
{"orig_name" : ["bottom_silk","^ssb$","^silk_bot$"], "tl_name" : "silk_bot" },
{"orig_name" : ["top_solder","^smt$","^sm_top$"], "tl_name" : "sm_top" },
{"orig_name" : ["bottom_solder","^smb$","^sm_botm$"], "tl_name" : "sm_botm" },
{"orig_name" : "^top$", "tl_name" : "top" },
{"orig_name" : "^drill$", "tl_name" : "drill" },
{"orig_name" : ["^board_outline$","outline.art","^outline$"], "tl_name" : "outline" },
{"orig_name" : ["^rout$","\\.rou$"], "tl_name" : "rout" },
{"orig_name" : "^bottom$", "tl_name" : "bottom" },
{"orig_name" : ["^l(\\d+)","^isl(\\d+)$","^layer_(\\d+)$"], "tl_name" : "l_($1)"},
{"orig_name" : ["_isl(\\d+)_isl(\\d+)","d(\\d+)-(\\d+)"], "tl_name" : "d_($1)-($2)"},
{"orig_name" : ["_top_isl(\\d+)"], "tl_name" : "d_1-($1)"},
{"orig_name" : ["_isl(\\d+)_bottom"], "tl_name" : "d_($1)-($1+1)"}
]
},
"Yucca": {
"step": "cad",
"rules": [
{
"valid": function(props){
var file = props.file;
return /.+\.tgz$/ig.test(file.name)
},
"type": "ODB",
"format": "ODB"
},
{
"valid": function(props){
var file = props.file;
return /.+\.ipc$/ig.test(file.name)
},
"type": "IPC356",
"format": "IPC356_1"
},
{
"valid": function(props){
var file = props.file;
return /.+\.rou$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_3"
},
{
"valid": function(props){
var file = props.file;
return /.+\.art$|\.l\d+$|\.r1$|\.sb$|\.st$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_2",
"format_params": function(props){
var params = props.params
if(params.art_param){
var leading = params.art_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.art_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
var nf1,nf2
if(params.art_param.hasOwnProperty("FORMAT")){
var tmp = params.art_param["FORMAT"].split(".")
if(/\d+/ig.test(tmp[0])){nf1 = Number(tmp[0])}
if(/\d+/ig.test(tmp[1])){nf2 = Number(tmp[1])}
}
return {
"nf1": nf1 || 3,
"nf2": nf2 || 5,
"units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
},
{
"valid": function(props){
var file = props.file;
return /.+\.drl$|\.d(\d+)-(\d+)/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_1",
"format_params": function(props){
var params = props.params
if(params.nc_param){
var leading = params.nc_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.nc_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
return {
"nf1": params.nc_param["INTEGER_PLACES"]? Number(params.nc_param["INTEGER_PLACES"]) : 3,
"nf2": params.nc_param["DECIMAL_PLACES"]? Number(params.nc_param["DECIMAL_PLACES"]) : 5,
"units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": params.nc_param["COORDINATES"]? params.nc_param["COORDINATES"].toLowerCase() :"absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
}
],
"tl_name": [
{"orig_name" : ["^pm_top","paste.pri","assytop\\.art","past_top","paste_top"], "tl_name" : "past_top" },
{"orig_name" : ["^pm_bot","paste.sec","assybot\\.art","past_bot","paste_bot"], "tl_name" : "past_botm" },
{"orig_name" : ["silk.pri","pleg\\.art","^ss_top","silk_top"], "tl_name" : "silk_top" },
{"orig_name" : ["silk.sec","sleg\\.art","^ss_bot","silk_bot"], "tl_name" : "silk_bot" },
{"orig_name" : ["\\.st$","mask.top\\.art","mask.pri\\.art","psm\\.art","sm_top"], "tl_name" : "sm_top" },
{"orig_name" : ["\\.sb$","mask.bot\\.art","mask.sec\\.art","ssm\\.art","sm_bot"], "tl_name" : "sm_botm" },
{"orig_name" : ["^top$","^top.art$"], "tl_name" : "top" },
{"orig_name" : ["\\.l(\\d+)$","^l(\\d+).*\\.art$","^0?(\\d+)_.*\\.art$","^l(\\d+)\\.art$","^0(\\d+).*ccp_ms","^s(\\d+)\\.art","lay(\\d+)\\.art","layer_(\\d+)"], "tl_name" : "l_($1)"},
{"orig_name" : ["^bottom$","^bottom\\.art$"], "tl_name" : "bottom" },
{"orig_name" : ["\\.d(\\d+)-(\\d+)([A-Za-z]+)$"], "tl_name" : "d($1)-($2)-($3)"},
{"orig_name" : ["\\.d(\\d+)-(\\d+)$","-(\\d+)-(\\d+)\\.drl$","(\\d+)-(\\d+)-laser\\.drl$","d(\\d+)-(\\d+)"], "tl_name" : "d_($1)-($2)"},
{"orig_name" : ["\\.rou$","^rout$"], "tl_name" : "rout" },
{"orig_name" : "fab.art", "tl_name" : "fab.art" },
{"orig_name" : ["multipack.art","^array$"], "tl_name" : "array" },
{"orig_name" : ["\\.R1$","outline"], "tl_name" : "outline" },
{"orig_name" : ["^pst\\.art$","top-enig","enig_top"], "tl_name" : "enig_top" },
{"orig_name" : ["^sst\\.art$","bot-enig","enig_bot"], "tl_name" : "enig_bot" }
],
"mergerule" : {
profile:["past_top"]
},
"extra": [
{
"verification": function(info){
if(!info.type){return false}
return /gerber/ig.test(info.type)
},
"fn": function(props){
var fileInfo = props.fileInfo;
var step = props.step;
fileInfo.forEach(function(item){
var layer = item.file.name.toLowerCase().split(" ").join("-")
var path = item.file.path
var filectx = fs.readFile(path)
var tmp = filectx.match(/Holesize \d\. = [\d\.]+ Tolerance = [\S]+ [\S]+ [\S]+ Quantity = \d+\n/igm)
if(tmp && tmp.length) {
var res = tmp.map(function(v,i) {
var tmp2 = /Holesize \d\. = ([\d\.]+) Tolerance = ([\S]+) ([\S]+) ([\S]+) Quantity = \d+\n/igm.exec(v);
return {
size: tmp2[1],
tolerance: tmp2[2],
type: tmp2[3],
unit: tmp2[4],
row: i+1
}
})
// [{"size":"0.100300","tolerance":"+0.020000/-0.020000","type":"PLATED","unit":"MM","row":1}]
GEN.units({type:"mm"})
var toolsInfo = GEN.getTool({job:job, step:step, layer:layer, units:"mm"})
GEN.COM("tools_show,layer="+layer)
// {"1":{"count":"01156","num":"1","type":"plated","min_tol":"0","max_tol":"0","finish_size":"1","drill_size":"1","slot_len":"0","type2":"standard","shape":"hole","bit":0}}
GEN.COM("tools_tab_reset")
var alltype = {
plated: "plate",
non_plated: "nplate",
laser: "via",
via: "via"
}
Object.keys(toolsInfo).forEach(function(row){
var info = toolsInfo[row];
var numberrow = row - 1;
var type = res[numberrow]? res[numberrow].type.toLowerCase() : info.type.toLowerCase();
var min_tol = res[numberrow]? Math.abs( res[numberrow].tolerance.split("/")[1] * 1000 ): info.min_tol;
var max_tol = res[numberrow]? Math.abs(res[numberrow].tolerance.split("/")[0] * 1000) : info.max_tol;
var drill_size = res[numberrow]? res[numberrow].size * 1000 : info.drill_size;
GEN.COM("tools_tab_add,num="+row+",shape="+info.shape+",type="+alltype[type]
+",min_tol="+min_tol+",max_tol="+max_tol+",bit=,finish_size="+drill_size+",drill_size="+drill_size);
})
GEN.COM("tools_set,layer="+layer+",thickness=0,user_params=,slots=by_length")
// {"layer":"gfp2_1216_lte_rl03_am_m1610201_r01-bl-2-3-laser.drl",
// "info":[{"size":"0.090300","tolerance":"+0.020000/-0.020000","type":"PLATED","unit":"MM","row":1}]}
}
})
}
}
]
},
"New_data": {
"step": "cad",
"rules": [
{
"valid": function(props){
var file = props.file;
return /.+\.tgz$/ig.test(file.name)
},
"type": "ODB",
"format": "ODB"
},
{
"valid": function(props){
var file = props.file;
return /.+\.art$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_2",
"format_params": function(props){
var params = props.params
if(params.art_param){
var leading = params.art_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.art_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
var nf1,nf2
if(params.art_param.hasOwnProperty("FORMAT")){
var tmp = params.art_param["FORMAT"].split(".")
if(/\d+/ig.test(tmp[0])){nf1 = Number(tmp[0])}
if(/\d+/ig.test(tmp[1])){nf2 = Number(tmp[1])}
}
return {
"nf1": nf1 || 3,
"nf2": nf2 || 5,
"units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
},
{
"valid": function(props){
var file = props.file;
return /.+\.drl$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_1",
"format_params": function(props){
var params = props.params
if(params.nc_param){
var leading = params.nc_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.nc_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
return {
"nf1": params.nc_param["INTEGER_PLACES"]? Number(params.nc_param["INTEGER_PLACES"]) : 3,
"nf2": params.nc_param["DECIMAL_PLACES"]? Number(params.nc_param["DECIMAL_PLACES"]) : 5,
"units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": params.nc_param["COORDINATES"]? params.nc_param["COORDINATES"].toLowerCase() :"absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
}
],
"tl_name": [
{"orig_name" : ["pasttop.art","^past_top$","top_solderpaste"], "tl_name" : "past_top" },
{"orig_name" : ["^silk_top\\.art$","pleg\\.art","^silk_top$","top_silkscreen"], "tl_name" : "silk_top" },
{"orig_name" : ["_r1\\.phd$","_r1\\.fph$","^smt\\.art$","soldtop.art","^sm_top$","top_soldermask"], "tl_name" : "sm_top" },
{"orig_name" : ["^top\\.art$","^top$"], "tl_name" : "top" },
{"orig_name" : ["_l(\\d+)\\.phd$","_l(\\d+)\\.fph$","^in_(\\d+)\\.art$","^l(\\d+)\\.art$","inner_(\\d+)\\.art","layer_(\\d+)"], "tl_name" : "l_($1)"},
{"orig_name" : ["^bot\\.art$","^bottom\\.art","^bottom$"], "tl_name" : "bottom" },
{"orig_name" : ["_r\\d\\.phd$","_r\\d\\.fph$","^smb\\.art$","soldbotm.art","^sm_botm$","bot_soldermask"], "tl_name" : "sm_botm" },
{"orig_name" : ["^silk_bottom\\.art$","sleg\\.art","^silk_bot$","bot_silkscreen"], "tl_name" : "silk_bot" },
{"orig_name" : ["pastbotm\\.art","^past_botm$","bot_solderpaste"], "tl_name" : "past_botm" },
{"orig_name" : ["^nc_drill$","^drill$"], "tl_name" : "drill" },
{"orig_name" : "multipack\\.art", "tl_name" : "array" },
{"orig_name" : ["\\.rou$","^rout$"], "tl_name" : "rout" },
{"orig_name" : ["outline.art","^outline$"], "tl_name" : "outline" },
{"orig_name" : ["fab.art","fab"], "tl_name" : "fab" },
{"orig_name" : "top-enig", "tl_name" : "top-enig" },
{"orig_name" : "bot-enig", "tl_name" : "bot-enig" },
{"orig_name" : "fab_page2", "tl_name" : "fab_page2" },
{"orig_name" : ["_d(\\d)(\\d+)\\.drd","_d(\\d)(\\d+)\\.fdr","^d(\\d)(\\d+)\\.art$","(\\d+)-(\\d+)-laser\\.drl","d(\\d+)-(\\d+)"], "tl_name" : "d_($1)-($2)"}
]
},
"Wistron":{
"step": "cad",
"rules": [
{
"valid": function(props){
var file = props.file;
return /.+\.tgz$/ig.test(file.name)
},
"type": "ODB",
"format": "ODB"
},
{
"valid": function(props){
var file = props.file;
return /.+\.btd$/ig.test(file.name)
},
"type": "IPC356",
"format": "IPC356_1"
},
{
"valid": function(props){
var file = props.file;
return /.+\.ger$/ig.test(file.name) || /\.gdo$|\.bol$|\.gdo$|\.pma$|\.sma$|\.smb$|\.ssa$|\.ssb$/ig.test(file.name) ||
/.+\.l\d+$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_3"
},
{
"valid": function(props){
var file = props.file;
return /.+\.ncd$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_4"
},
{
"valid": function(props){
var file = props.file;
return /.+\.d\d+$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_6"
},
{
"valid": function(props){
var file = props.file;
return /.+\.art$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_3",
"format_params": function(props){
var params = props.params
if(params.art_param){
var leading = params.art_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.art_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
var nf1,nf2
if(params.art_param.hasOwnProperty("FORMAT")){
var tmp = params.art_param["FORMAT"].split(".")
if(/\d+/ig.test(tmp[0])){nf1 = Number(tmp[0])}
if(/\d+/ig.test(tmp[1])){nf2 = Number(tmp[1])}
}
return {
"nf1": nf1 || 3,
"nf2": nf2 || 5,
"units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "*",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.art_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": "absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
},
{
"valid": function(props){
var file = props.file;
return /.+\.drl$|\.rou$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_4",
"format_params": function(props){
var params = props.params
if (params.ncdrill && !params.nc_param){params.nc_param = params.ncdrill}
if(params.nc_param){
var leading = params.nc_param["SUPPRESS_LEAD_ZEROES"]
var trailing = params.nc_param["SUPPRESS_TRAIL_ZEROES"]
var zeroes = "none"
if(/yes/ig.test(leading)){
zeroes = "leading"
}
if(/yes/ig.test(trailing)){
zeroes = "trailing"
}
return {
"nf1": params.nc_param["INTEGER_PLACES"]? Number(params.nc_param["INTEGER_PLACES"]) : 3,
"nf2": params.nc_param["DECIMAL_PLACES"]? Number(params.nc_param["DECIMAL_PLACES"]) : 5,
"units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"zeroes": zeroes,
"decimal": "no",
"nf_comp": 0,
"break_sr": "yes",
"data_type": "ascii",
"separator": "nl",
"threshold": 200,
"drill_only": "no",
"multiplier": 1,
"resolution": 3,
"tool_units": /METRIC|MM/ig.test(params.nc_param["OUTPUT_UNITS"])? "mm" :"inch",
"coordinates": params.nc_param["COORDINATES"]? params.nc_param["COORDINATES"].toLowerCase() :"absolute",
"merge_by_rule": "no",
"signed_coords": "no",
"text_line_width": 0.0024
}
}
}
}
],
"tl_name": [
{"orig_name" : ["^pmt\\.art$","\\.pma$","SoldPasteTop\\.ger","past_top"], "tl_name" : "past_top" },
{"orig_name" : ["^pmb\\.art$","\\.pmb$","SoldPasteBot\\.ger","past_botm"], "tl_name" : "past_botm" },
{"orig_name" : ["tsilk","^sst\\.art$","\\.ssa$","SilkScrnTop\\.ger","silk_top"], "tl_name" : "silk_top" },
{"orig_name" : ["bsilk","^ssb\\.art$","\\.ssb$","SilkScrnBot\\.ger","silk_bot"], "tl_name" : "silk_bot" },
{"orig_name" : ["tmask","^smt\\.art$","\\.sma$","SoldMask1Top\\.ger","sm_top"], "tl_name" : "sm_top" },
{"orig_name" : ["bmask","^smb\\.art$","\\.smb$","SoldMask1Bot\\.ger","sm_bot"], "tl_name" : "sm_botm" },
{"orig_name" : ["^top$","^top.art$"], "tl_name" : "top" },
{"orig_name" : ["^l(\\d+).*\\.art$","^v(\\d+)\\.art$","^g(\\d+)\\.art$","^s(\\d+)\\.art$","\\.l(\\d+)$","Copper(\\d+)\\.ger$","^layer_(\\d+)"], "tl_name" : "l_($1)"},
{"orig_name" : ["^bot\\.art$","^bottom$","^bottom.art$"], "tl_name" : "bottom" },
{"orig_name" : ["\\.d(\\d+)$"], "tl_name" : "d_($1)-($1+1)"},
{"orig_name" : ["thruHolePlated_(\\d+)_(\\d+)\\.ncd","(\\d+)-(\\d+)\\.drl$","^drill(\\d+)-(\\d+)$","^d_(\\d+)-(\\d+)$"], "tl_name" : "d_($1)-($2)"},
{"orig_name" : ["ThruHoleNonPlated\\.ncd$","^drill$"], "tl_name" : "drill" },
{"orig_name" : ["\\.rou$","^rout$"], "tl_name" : "rout" },
{"orig_name" : "fab.art", "tl_name" : "fab.art" },
{"orig_name" : ["multipack.art","^array$"], "tl_name" : "array" },
{"orig_name" : ["outline\\.art$","\\.bol$","PnlContourNonPlated\\.ger","^outline"], "tl_name" : "outline" },
{"orig_name" : ["top-enig","enig_top"], "tl_name" : "enig_top" },
{"orig_name" : ["bot-enig","enig_bot"], "tl_name" : "enig_bot" },
]
},
"Vivo":{
"step": "cad",
"rules": [
{
"valid": function(props){
var file = props.file;
return /.+\.tgz$/ig.test(file.name)
},
"type": "ODB",
"format": "ODB"
},
{
"valid": function(props){
var file = props.file;
return /.+\.btd$|.+\.rou$/ig.test(file.name)
},
"type": "IPC356A",
"format": "IPC356A_1"
},
{
"valid": function(props){
var file = props.file;
return /\.gdo$|\.pho$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_4"
},
{
"valid": function(props){
var file = props.file;
return /.+\.ncd$/ig.test(file.name) || /.+\.d\d+$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_5"
},
{
"valid": function(props){
var file = props.file;
return /.+\.drl/ig.test(file.name) || /.+\.d\d+$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_7"
}
],
"tl_name": [
{"orig_name" : ["osp-top\\.pho","solderpastetop","past_top"], "tl_name" : "past_top" },
{"orig_name" : ["osp-bottom\\.pho","solderpastebottom","past_botm"], "tl_name" : "past_botm" },
{"orig_name" : ["pleg\\.art","^ss_top","silk_top"], "tl_name" : "silk_top" },
{"orig_name" : ["sleg\\.art","^ss_bot","silk_bot"], "tl_name" : "silk_bot" },
{"orig_name" : ["soldermask-top","top-solder-mask\\.pho","soldermasktop","sm_top"], "tl_name" : "sm_top" },
{"orig_name" : ["soldermask-bottom","bottom-solder-mask\\.pho","soldermaskbottom","sm_bot"], "tl_name" : "sm_botm" },
{"orig_name" : ["top\\.pho","^top$","layertop"], "tl_name" : "top" },
{"orig_name" : ["^lay(\\d+)","layer(\\d+)\\.gdo","layer_(\\d+)"], "tl_name" : "l_($1)"},
{"orig_name" : ["^bottom\\.pho$","^bottom$","layerbottom"], "tl_name" : "bottom" },
{"orig_name" : ["^drill(\\d+)-(\\d+)$","^d(\\d+)-(\\d+)$"], "tl_name" : "d_($1)-($2)"},
{"orig_name" : ["^drill$"], "tl_name" : "drill" },
{"orig_name" : ["\\.rou$","^rout$"], "tl_name" : "rout" },
{"orig_name" : "fab.art", "tl_name" : "fab.art" },
{"orig_name" : ["pcb-set\\.gdo","^pcb-set\\.pho$","^pcb-set$","^array$"], "tl_name" : "array" },
{"orig_name" : ["^outline"], "tl_name" : "outline" },
{"orig_name" : ["au_mask-bottom\\.gdo","au_mask_bottom\\.gdo","enig_top"], "tl_name" : "enig_top" },
{"orig_name" : ["au_mask-top\\.gdo","au_mask_top\\.gdo","enig_bot"], "tl_name" : "enig_bot" },
{"orig_name" : ["cavitytop","cavity_top"], "tl_name" : "cavity_top" },
{"orig_name" : ["cavitybottom","cavity_bot"], "tl_name" : "cavity_bot" },
],
"mergerule" : {
drill_second: ["(\\d+)-(\\d+)\\.drl$"],
drill: [
{orig_rule:["contournonplated"],drill_type:"non_plated",shape:"slot"},
{orig_rule:["contourplated"],drill_type:"plated",shape:"slot"},
{orig_rule:["thruholenonplated"],drill_type:"non_plated",shape:"hole"},
{orig_rule:["thruholeplated"],drill_type:"plated",shape:"hole"},
],
profile:["enig_bot","past_top"],
laser : {
tl_name: "drill($1)-($2)",
regs: ["(\\d+)-(\\d+)plated\\.ncd$","(\\d+)-(\\d+)\\.drl$"]
}
}
},
"1352":{
"step": "cad",
"rules": [
{
"valid": function(props){
var file = props.file;
return /.+\.tgz$/ig.test(file.name)
},
"type": "ODB",
"format": "ODB"
},
{
"valid": function(props){
var file = props.file;
return /.+\.ipc$/ig.test(file.name)
},
"type": "IPC356",
"format": "IPC356_1"
},
{
"valid": function(props){
var file = props.file;
return /.+\.art$/ig.test(file.name)
},
"type": "Gerber274x",
"format": "Gerber274x_5"
},
{
"valid": function(props){
var file = props.file;
return /.+\.drl$/ig.test(file.name)
},
"type": "Excellon2",
"format": "Excellon2_8"
}
],
"tl_name": [
{"orig_name" : ["pasttop\\.art","past_top"], "tl_name" : "past_top" },
{"orig_name" : ["pastbotm\\.art","past_botm"], "tl_name" : "past_botm" },
{"orig_name" : ["^silktop\\.art$","silk_top"], "tl_name" : "silk_top" },
{"orig_name" : ["^silkbotm\\.art$","silk_bot"], "tl_name" : "silk_bot" },
{"orig_name" : ["soldtop.art","sm_top"], "tl_name" : "sm_top" },
{"orig_name" : ["soldbotm\\.art","sm_bot"], "tl_name" : "sm_botm" },
{"orig_name" : ["^top$","^top.art$"], "tl_name" : "top" },
{"orig_name" : ["^pgp(\\d+)\\.art$","^art(\\d+)\\.art$","^l_(\\d+)"], "tl_name" : "l_($1)"},
{"orig_name" : ["^bot\\.art$","^bottom$","^bottom.art$"], "tl_name" : "bottom" },
{"orig_name" : ["\\.d(\\d+)$"], "tl_name" : "d_($1)-($1+1)"},
{"orig_name" : ["^drill(\\d+)-(\\d+)$","^d_(\\d+)-(\\d+)$"], "tl_name" : "d_($1)-($2)"},
{"orig_name" : ["^drill$"], "tl_name" : "drill" },
{"orig_name" : ["\\.rou$","^rout$"], "tl_name" : "rout" },
{"orig_name" : "fab.art", "tl_name" : "fab.art" },
{"orig_name" : ["multipack.art","^array$"], "tl_name" : "array" },
{"orig_name" : ["\\.bol$","PnlContourNonPlated\\.ger","^outline"], "tl_name" : "outline" },
{"orig_name" : ["top-enig","enig_top"], "tl_name" : "enig_top" },
{"orig_name" : ["bot-enig","enig_bot"], "tl_name" : "enig_bot" },
],
"mergerule" : {
drill:["(\\d+)-(\\d+)\\.drl$"],
profile:["sm_top"],
laser : {
tl_name: "drill($1)-($2)",
regs: ["(\\d+)-(\\d+)\\.drl$"]
}
}
}
},
"data_format": [
{"tl_name":"enig_top" , "new_name":"enig_top" , "attr":{ "context":"board", "type":"document" }},
{"tl_name":"past_top" , "new_name":"past_top" , "attr":{ "context":"board", "type":"solder_paste" }},
{"tl_name":"silk_top" , "new_name":"silk_top" , "attr":{ "context":"board", "type":"silk_screen" }},
{"tl_name":"sm_top" , "new_name":"sm_top" , "attr":{ "context":"board", "type":"solder_mask" }},
{"tl_name":"^top$" , "new_name":"top" , "attr":{ "context":"board", "type":"signal" }},
{"tl_name":"l_(\\d+)","new_name":"l($1)" ,"attr":{"context":"board","type":"signal"}},
{"tl_name":"^bottom$","new_name":"bottom" ,"attr":{"context":"board","type":"signal"}},
{"tl_name":"sm_botm" , "new_name":"sm_botm" , "attr":{ "context":"board", "type":"solder_mask" }},
{"tl_name":"silk_bot" , "new_name":"silk_bot" , "attr":{ "context":"board", "type":"silk_screen" }},
{"tl_name":"past_botm" , "new_name":"past_botm" , "attr":{ "context":"board", "type":"solder_paste" }},
{"tl_name":"enig_bot" , "new_name":"enig_bot" , "attr":{ "context":"board", "type":"document" }},
{"tl_name":"d_(\\d+)-(\\d+)","new_name":"ftdrill($1)-($2)l" ,"attr":{"context":"board","type":"drill"}},
{"tl_name":"d(\\d+)-(\\d+)-(.*)","new_name":"ftdrill($1)-($2)-($3)" ,"attr":{"context":"board","type":"drill"}},
{"tl_name":"drill","new_name":"ftdrill" ,"attr":{"context":"board","type":"drill"}},
{"tl_name":"rout","new_name":"rout" ,"attr":{"context":"board","type":"rout"}},
{"tl_name":"outline","new_name":"outline" ,"attr":{"context":"board","type":"rout"}},
{"tl_name":"array","new_name":"array" ,"attr":{"context":"misc"}},
{"tl_name":"cavity_top","new_name":"cavity_top" ,"attr":{"context":"misc"}},
{"tl_name":"cavity_bot","new_name":"cavity_bot" ,"attr":{"context":"misc"}},
{"tl_name":"fab.art","new_name":"fab.art" ,"attr":{"context":"misc"}}
],
"delSameJob": "yes"
}})()
\ No newline at end of file
public_script/scotttest.js
View file @ c463b267
......@@ -30,7 +30,7 @@ PARAMETER:
HELP:
<html><body bgcolor="#DDECFE">
<font size="3" color="#003DB2"><p>功能简介</p></font>
<p> ol转孔 </p>
<p> 分刀与合刀 </p>
<br>
<font size="3" color="#003DB2"><p>参数配置</p></font>
<p> step信息 </p>
......@@ -52,13 +52,10 @@ var mode = $.ikm ? "topcam" : "aimdfm";
var IKM = $.ikm;
if (IKM==undefined ) { IKM = require('topcam.ikm6')($) }
var GEN = $.gen;
require("topsin.genmath")
var zip = require('topsin.zip');
var GUI = $.gui || {};
var Job = $.job || $.job_name;
var JobId = $.job_id;
var db = $.db || IKM.db
var genMath = new GenMath();
var PAR = {}
if ($.par) {
PAR = $.par
......@@ -88,8 +85,7 @@ try {
var default_par = {
step: "unit",
auto_save: "No",
units: "mm",
rout: "ol"
units: 'mm'
}
for(var key in default_par){ // 设置默认属性
if (!par.hasOwnProperty(key) || par[key] == ""){
......@@ -104,205 +100,60 @@ try {
if(GEN.checkInout({job:job,mode:"test"}) != 0){ throw "the job check" }
GEN.checkInout({job:job,mode:"out"});
}
var step = "unit"
// var layer = "gto_font"
// GEN.workLayer({name:layer,display_number:2,clear_before:'yes'})
// var tmp_con = GEN.MOUSE({type:'r',text:"Please Select"});
// GEN.COM("filter_area_strt")
// GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
// GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
// GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
// if(GEN.getSelectCount() > 0) {
// var tmp_layer = layer + '_temp'
// // 倾斜文字处理
// // 1. 拷贝到辅助层
// if(GEN.isLayerExists({job:job, layer:tmp_layer})){GEN.deleteLayer({job:job, layer:[tmp_layer]})}
// GEN.selCopyOther({dest:'layer_name',target_layer:tmp_layer})
// GEN.workLayer({name:tmp_layer,display_number:2,clear_before:'yes'})
// GEN.selCopyOther({dest:'layer_name',target_layer:"_ok"})
// var limits = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm"})
// for (var key in limits) {
// limits[key] = limits[key] - 0;
// }
// limits.xc = limits.xmin + limits.xsize/2
// limits.yc = limits.ymin + limits.ysi
slsdaslkdnxais(kasd_\{
..schhhhakssjanxmmxzcckzsasi
})
asdasd(asdj喀斯柯达
SVGRadialGradientElement())
akdasdx()nxxxsbnzzzzxxc
JSjdk()kkI
djskahlnmxaolnm
sadlk iijd arr.foraEagcktufb ioossjvbsk()
sjxnk()sjsj
AbortSignal()asd()
sakcn()
SVGZoomAndPan(adsjjjjwuudndlwnanmh()
Hksasjjaasj)
asdk(aslkd
saj()sdklaskdaskdjalsdjf9
asasjfja(fuf* )
) {
sakdjFEbnwor.(),（
{
askdasldllajd::asdhaksd,
JKLAJL:Jsadlasldl:SVGAnimatedLength,
as;dad:daJDDJAS
dasjjadas:dsadk
ahsdh:askd
阿萨德adjadsa
asdjj
job = "1";
var step = "cad"
var layer= "drl"
if(GEN.isLayerExists({job:job, layer:"pt-rou"})){GEN.deleteLayer({job:'Job',layer:["pt-rou"]})}
if(GEN.isLayerExists({job:job, layer:"ol_tmp"})){GEN.deleteLayer({job:'Job',layer:["ol_tmp"]})}
GEN.createLayer({job:job,layer:'pt-rou',conext:'misc',type:'rout'})
GEN.matrixMoveRow({job:job,layer:'pt-rou',after:'---'})
var feats = GEN.getFeatures({job:job,step:step,layer:layer, options:"feat_index", units:"mm"})
feats.forEach(function(item) {
if(item.type == "line") { // 槽孔
var width = parseFloat(item.symbol.slice(1))
var length = width + Math.sqrt((item.xe - item.xs)*(item.xe - item.xs) + (item.ye - item.ys)*(item.ye - item.ys))
if(item.attributes && item.attributes.indexOf(".drill=non_plated") >= 0) {
if(width >= 6050 || length>= 12000){
GEN.selLayerFeat({layer:layer, index:index,operation:"select"});
if(GEN.getSelectCount() > 0){GEN.selMoveOther({target_layer:'ol_tmp',invert:'no',dx:0,dy:0,size:0})}
}
} else if (item.attributes && item.attributes.indexOf(".drill=plated") >= 0) {
if(width >= 6050 || length>= 12000){
GEN.selLayerFeat({layer:layer, index:index,operation:"select"});
if(GEN.getSelectCount() > 0){GEN.selMoveOther({target_layer:'pt-rou',invert:'no',dx:0,dy:0,size:0})}
}
}
}
asdjlsa){
asdasl;MSFIDOCredentialAssertion,xodka
LASDKSAHDmLAJSDkajsf:asdjj
}JKdddak)
OscillatorNode;
padStartkkkP
ksx:sjdaks:,
asdja:sadjj,
Ksad:sdad,
sajjjsd:dasda,
ajdlask:adas,
dlas:dalsl
aldk:sada
lasdm:aslksad
aslkdasda:asdakd
saldlsad：dkh,kaajsm
aslkd:skd,
asd;a"sadadl
function() {
arr.foraEagcktufbch(function() {
lsdalnif9"asdjkka
ajsdpadllaasldsa:sadlkad
ad:adka,
ASDLL
asd"sd
ljasdsk:sd:jsdnmskladddlal
lsajd:asla:sadadl,
sad:sadkldllasd,a'
asks:sksd
asdk:asjdn'jkashas,
asdjlask"asd,
lasd:sdal,
asdslsad:asdj,
asjdsksm:.foraEagcktufb
sakldal:aldka,
daaaaaaaadadada,
lsc:asjdad,,
ajsdal:
jdas"sajfi:asjdl
;;kdk"adkk,
})kakndal:aldalm,aldj:admzzz
alskdasd"sdlksadnmlasld
aslkd:asdklk,
sadad:sdajk:
,sadaklsd:sdjlsad,
adkajsd;:adklqoununcitno
(*f) Paisdhadlkkaalsd:asdkkamzmqoila
asdsal:asldk,
adklsad:sakdajwl:mkadfunctinasd;kasd,
ad:asdj,
dsala;dLdsas,.foraEagcktufblam
adasdaasd;asdal,
askdadjams:asdjasd,
asdl:djas,
Jsadl:mode,
djasdl:asdla,
asdkajd:dsakwmxm
adlkm,
sad;lsakslssssssssssssssssssssssssss
if(item.type == "pad") {
var size = parseFloat(item.symbol.slice(1));
if(item.attributes && item.attributes.indexOf(".drill=non_plated") >= 0) {
if(size > 6000 ){
GEN.selLayerFeat({layer:layer, index:index,operation:"select"});
if(GEN.getSelectCount() > 0){GEN.selMoveOther({target_layer:'ol_tmp',invert:'no',dx:0,dy:0,size:0})}
}
} else if (item.attributes && item.attributes.indexOf(".drill=plated") >= 0) {
if(size > 12000 ){
GEN.selLayerFeat({layer:layer, index:index,operation:"select"});
if(GEN.getSelectCount() > 0){GEN.selMoveOther({target_layer:'pt-rou',invert:'no',dx:0,dy:0,size:0})}
}
}
}
})
lkajfklf(P{
asd;ka"ad
adlkasjd var = asjdl
asdkl =
})
// 将ol_tmp 和 pt-rou的转为非闭合图形
GEN.clearLayers()
GEN.affectedLayer({affected:'yes',layer:["ol_tmp", "pt-rou"], clear_before:"yes"})
GEN.COM("sel_contourize,accuracy=0,break_to_islands=yes,clean_hole_size=0,clean_hole_mode=x_and_y")
GEN.COM("sel_surf2outline,width=1")
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.workLayer({name:'ol_tmp',display_number:2,clear_before:'yes'})
GEN.selMoveOther({target_layer:'ol',invert:'no',dx:0,dy:0,size:0})
// // 获取里面有几个字母 每一个字母的limits信息
// GEN.selChangeSym({symbol:"r1"})
// GEN.selContourize()
// var feas = GEN.getFeatures({job:job,step:"unit",layer:tmp_layer,options:"feat_index",units:"mm"})
// var limits_info = [];
// feas.forEach(function(item) {
// var index = item.index;
// GEN.selLayerFeat({layer:tmp_layer, index:index,operation:"select"});
// if(GEN.getSelectCount() > 0) {
// var tmp_l = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm", options:"select"})
// for (var key in tmp_l) {
// tmp_l[key] = tmp_l[key] - 0;
// }
// tmp_l.xc = tmp_l.xmin + tmp_l.xsize/2
// tmp_l.yc = tmp_l.ymin + tmp_l.ysize/2
// limits_info.push({index:index, limits:tmp_l })
// GEN.selClearFeature()
// }
// })
// var rodata = []
// limits_info.forEach(function (item, i) {
// if(limits_info[i+1]){
// rodata.push(getRodate({
// xs : item.limits.xc,
// ys : item.limits.yc,
// xe : limits_info[i+1].limits.xc,
// ye : limits_info[i+1].limits.yc
// }))
// }
// })
// var angle = rodata.reduce(function(a,b) {return a + b}) / rodata.length;
// if (Math.abs(angle) < 10) { angle = 0 }
// GEN.workLayer({name:"_ok",display_number:2,clear_before:'yes'});
// GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:limits.xc,y_anchor:limits.yc,angle:angle})
// // 按照中心放大
// var limits2 = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm"})
// for (var key in limits) {
// limits2[key] = limits2[key] - 0;
// }
// limits2.xc = limits2.xmin + limits2.xsize/2
// limits2.yc = limits2.ymin + limits2.ysize/2
// GEN.selTransform({mode:'anchor',oper:'scale',x_anchor:limits2.xc,y_anchor:limits2.yc,x_scale:1.2,y_scale:1})
// GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:limits.xc,y_anchor:limits.yc,angle:360 - angle})
// }
// IKM.msg(feas[0].feats)
// var ret = genMath.profile2Polygon(feas[0].feats)
// COM tools_tab_reset
// COM tools_tab_add,num=1,shape=hole,type=via,min_tol=0,max_tol=1,bit=,drill_size=300
// COM tools_tab_add,num=2,shape=hole,type=via,min_tol=0,max_tol=0,bit=,drill_size=500
// COM tools_tab_add,num=3,shape=hole,type=plate,min_tol=0,max_tol=0,bit=,drill_size=700
// COM tools_tab_add,num=4,shape=hole,type=plate,min_tol=0,max_tol=0,bit=,drill_size=800
// COM tools_tab_add,num=5,shape=hole,type=plate,min_tol=0,max_tol=0,bit=,drill_size=900
// COM tools_tab_add,num=6,shape=hole,type=plate,min_tol=0,max_tol=0,bit=,drill_size=1000
// COM tools_tab_add,num=7,shape=hole,type=nplate,min_tol=0,max_tol=0,bit=,drill_size=1600
// COM tools_tab_add,num=8,shape=hole,type=plate,min_tol=0,max_tol=0,bit=,drill_size=3000
// COM tools_tab_add,num=9,shape=hole,type=nplate,min_tol=0,max_tol=0,bit=,drill_size=3300
// COM tools_set,layer=drl,thickness=3235.96,user_params=,slots=no
setTool({
job:job,
step:step,
layer:"drl_tmp",
callback: function (toolinfo) {
IKM.msg(toolinfo)
}
})
// 保存
if(/yes/ig.test(par.auto_save)){
......@@ -334,75 +185,3 @@ SVGZoomAndPan(adsjjjjwuudndlwnanmh()
return (mode === "aimdfm") ? {status: Status, result_data: resultData} : "Error";
}
function selCopyLayer(props){ // 拷贝选择的到辅助层
var layer = props.layer
var job = props.job
if(GEN.isLayerExists({job:job,layer:layer})){
GEN.deleteLayer({job:job,layer:layer})
}
GEN.selCopyOther({dest:'layer_name',target_layer:layer})
}
function getMinSym(sym) {
var min_size;
for (var key in sym) {
var info = sym[key]
if(info.size){info.size = Number(info.size)}
if(!info.size) {
var width = Number(info.width)
var height = Number(info.height)
info.size = width > height ? height : width;
}
if(info.size) {
if(!min_size){min_size = info.size}
else if (info.size < min_size) {
min_size = info.size
}
}
}
return min_size
}
function getRodate(props){
var xs = props.xs;
var ys = props.ys;
var xe = props.xe;
var ye = props.ye;
var y = ye - ys;
var x = xe - xs;
var r = Math.atan(y / x)
return r*180/Math.PI
}
function setTool(props) {
var job = props.job;
var step = props.step;
var layer = props.layer;
var tool_info = GEN.getTool({job:job, step: step , layer:layer, units:"mm"})
// 操作tool_info
props.callback(tool_info)
GEN.COM("tools_show,layer="+layer)
GEN.COM("tools_tab_reset")
var typehash = {
non_plated:"nplate",
plated:"plate",
via:"via",
laser:"via"
}
Object.keys(tool_info).forEach(function(key){
var item = tool_info[key]
if (item.shape == "hole") {
GEN.COM("tools_tab_add,num="+key
+",shape="+item.shape+",type="+typehash[item.type]+",min_tol="+item.min_tol+
",max_tol="+item.max_tol+",bit=,finish_size="+item.finish_size+
",drill_size="+item.drill_size+",combined=yes,orig_size=0")
} else if (item.shape == "slot") {
GEN.COM("tools_tab_add,num="+key+",shape=slot,type="+typehash[item.type]+",min_tol="+item.min_tol+",max_tol="+item.max_tol+",finish_size="+item.finish_size+
",bit=,drill_size="+item.drill_size+",slot_len="+item.slot_len)
}
})
GEN.COM("tools_set,layer="+layer+",slots=by_length")
}
\ No newline at end of file
public_script/silkScreenOptimize.js
View file @ c463b267
......@@ -173,24 +173,24 @@ try {
if(!GEN.isJobOpen({job:job})){ GEN.openJob({job:job}) }
if(mode == "aimdfm"){ if(GEN.checkInout({job:job,mode:"test"}) != 0){ throw "the job check" } else { GEN.checkInout({job:job,mode:"out"}) } }
IKM.msg("创建套层")
var err = createCoverLayer() // 创建套层
if (err) {throw err}
GEN.PAUSE("end")
IKM.msg("分离文字和文字框")
var err = ssFrameSeparate() // 分离文字和文字框
if (err) {throw err}
GEN.PAUSE("end")
var workstep = getWorkStep()
if(!Array.isArray(workstep)){throw "工作step错误"}
IKM.msg("文字框优化")
var err = slBoxOptimize() // 文字框优化
if (err) {throw err}
GEN.PAUSE("end")
// var err = createCoverLayer({workstep:workstep}) // 创建套层
// if (err) {throw err}
// GEN.PAUSE("createCoverLayer end; please check")
IKM.msg("文字优化")
var err = slOptimize() // 文字优化
if (err) {throw err}
// var err = ssFrameSeparate({workstep:workstep}) // 分离文字和文字框
// if (err) {throw err}
// GEN.PAUSE("ssFrameSeparate end; please check")
// var err = slBoxOptimize({workstep:workstep}) // 文字框优化
// if (err) {throw err}
// GEN.PAUSE("slBoxOptimize end; please check")
var err = slOptimize({workstep:workstep}) // 文字优化
if (err) {throw err}
GEN.PAUSE("slOptimize end; please check")
......@@ -212,8 +212,7 @@ try {
// 创建套层
function createCoverLayer (props){
// 1. step过滤
var workstep = getWorkStep()
if(!Array.isArray(workstep)){throw "工作step错误"}
var workstep = props.workstep;
// 2.过滤工作层
var work_layer = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
......@@ -230,7 +229,7 @@ function createCoverLayer (props){
var info = gui.showForm({
title : '请手动匹配以下信息',
showcheck : 1,gen:GEN,
defaultsize:[500,250],
defaultsize:[200,100],
ui: {
type: 'ScrollArea',
property: { widget_resizable: true, frame_shape: 'NoFrame', align: 'Top' },
......@@ -323,10 +322,9 @@ function createCoverLayer (props){
GEN.clearLayers()
}
// 字符 和 文字框分开
function ssFrameSeparate () {
function ssFrameSeparate (props) {
// 1. step过滤
var workstep = getWorkStep()
if(!Array.isArray(workstep)){throw "工作step错误"}
var workstep = props.workstep;
// 2.过滤工作层
var work_layers = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
......@@ -336,7 +334,7 @@ function ssFrameSeparate () {
tmp[key] = key;
return tmp
})
work_layers = gui.selectMultiple({title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
work_layers = gui.selectMultiple({defaultsize:[200,100],title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
}
if(work_layers.length == 0 ) {return "没有先择layer"}
......@@ -561,10 +559,9 @@ function ssFrameSeparate () {
})
}
// 文字框按阻焊扩大
function slBoxOptimize(){
function slBoxOptimize(props){
// 1. step过滤
var workstep = getWorkStep()
if(!Array.isArray(workstep)){throw "工作step错误"}
var workstep = props.workstep;
// 2.过滤工作层
var work_layers = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
......@@ -574,7 +571,7 @@ function slBoxOptimize(){
tmp[key] = key;
return tmp
})
work_layers = gui.selectMultiple({title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
work_layers = gui.selectMultiple({defaultsize:[200,100],title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
}
if(work_layers.length == 0 ) {return "没有先择layer"}
......@@ -794,10 +791,11 @@ function slBoxOptimize(){
}
// 文字放大
function slOptimize() {
function slOptimize(props) {
var x_scale = 1;
var y_scale = 1.2;
// 1. step过滤
var workstep = getWorkStep()
if(!Array.isArray(workstep)){throw "工作step错误"}
var workstep = props.workstep;
// 2.过滤工作层
var work_layers = getLayer({layer_type:"silk_screen", context: "board"})
if(/yes/ig.test(par.select_lyr)){
......@@ -807,7 +805,7 @@ function slOptimize() {
tmp[key] = key;
return tmp
})
work_layers = gui.selectMultiple({title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
work_layers = gui.selectMultiple({defaultsize:[200,100],title: "请先择工作层",list: layers,defaultvalue: work_layers,columns: 4,gen: GEN})
}
if(work_layers.length == 0 ) {return "没有先择layer"}
......@@ -824,18 +822,18 @@ function slOptimize() {
var tmp2 = font_layer + "_2";
var tmp3 = font_layer + "_3";
var bk = font_layer + "_bk";
var bk2 = font_layer + "_bk2";
var bk2 = font_layer + "_ok";
[tmp1,tmp2,tmp3,bk,bk2].forEach(function(v){
if(GEN.isLayerExists({job:job, layer:v})){GEN.deleteLayer({job:job,layer:[v]})}
})
GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:tmp1, mode:"replace"})
// GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:tmp1, mode:"replace"})
GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:tmp3, mode:"replace"})
GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:bk2, mode:"replace"})
GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:bk, mode:"replace"})
// GEN.copyLayer({source_job:job,source_step:step,source_layer:font_layer,dest_layer:bk, mode:"replace"})
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.selClearFeature()
GEN.workLayer({name:tmp1,display_number:2,clear_before:'yes'})
GEN.selChangeSym({symbol:"r0.1"})
// GEN.workLayer({name:tmp1,display_number:2,clear_before:'yes'})
// GEN.selChangeSym({symbol:"r0.1"})
// 利用tmp3 快速定位
GEN.workLayer({name:tmp3,display_number:2,clear_before:'yes'})
......@@ -855,6 +853,13 @@ function slOptimize() {
item.limit.ymin = Number(item.limit.ymin);
item.xc = item.limit.xsize / 2 + item.limit.xmin
item.yc = item.limit.ysize / 2 + item.limit.ymin
if(item.limit.xsize > item.limit.ysize) {
item.x_scale = x_scale
item.y_scale = y_scale
} else {
item.y_scale = x_scale
item.x_scale = y_scale
}
GEN.selClearFeature()
}
})
......@@ -865,133 +870,205 @@ function slOptimize() {
GEN.COM("filter_area_xy,x="+item.limit.xmax+",y=" + item.limit.ymax)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=yes")
if(GEN.getSelectCount() > 0 ) {
GEN.selTransform({mode:'anchor',oper:'scale',
x_anchor: item.xc,
y_anchor: item.yc,
x_scale:1.2,y_scale:1.2})
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor: item.xc,y_anchor: item.yc,x_scale:item.x_scale,y_scale:item.y_scale})
}
})
GEN.units({type:par.units})
GEN.workLayer({name:tmp1,display_number:2,clear_before:'yes'})
GEN.copyLayer({source_job:job,source_step:step,source_layer:tmp1,dest_layer:tmp2, mode:"replace"})
GEN.COM("sel_contourize,accuracy=0,break_to_islands=yes,clean_hole_size=0,clean_hole_mode=x_and_y")
GEN.affectedLayer({affected:'no',mode:'all'})
GEN.clearLayers()
var features = GEN.getFeatures({job:job,step:step,layer:tmp1,options:"feat_index"})
var indexes = []
features.forEach(function(item){
GEN.workLayer({name:tmp1,display_number:2,clear_before:'yes'})
var index = item.index;
// 选中index 将它复制到tmp3 获取信息
GEN.selLayerFeat({layer:tmp1, index:index,operation:"select"})
if(GEN.getSelectCount() > 0){
item.limit = GEN.getLayerLimits({job:job,step:step,layer:tmp1,units:'mm', options:"select"})
}
})
var xs = {};
var ys = {};
// GEN.units({type:par.units})
// GEN.workLayer({name:tmp1,display_number:2,clear_before:'yes'})
// GEN.copyLayer({source_job:job,source_step:step,source_layer:tmp1,dest_layer:tmp2, mode:"replace"})
// GEN.COM("sel_contourize,accuracy=0,break_to_islands=yes,clean_hole_size=0,clean_hole_mode=x_and_y")
// GEN.affectedLayer({affected:'no',mode:'all'})
// GEN.clearLayers()
// var features = GEN.getFeatures({job:job,step:step,layer:tmp1,options:"feat_index"})
// var indexes = []
// features.forEach(function(item){
// GEN.workLayer({name:tmp1,display_number:2,clear_before:'yes'})
// var index = item.index;
// // 选中index 将它复制到tmp3 获取信息
// GEN.selLayerFeat({layer:tmp1, index:index,operation:"select"})
// if(GEN.getSelectCount() > 0){
// item.limit = GEN.getLayerLimits({job:job,step:step,layer:tmp1,units:'mm', options:"select"})
// }
// })
// var xs = {};
// var ys = {};
features.forEach(function(item){
surfaceAnalysis(item)
indexes.push({
index:item.index,
xmin : item.limit.xmin,
ymin : item.limit.ymin,
xmax : item.limit.xmax,
ymax : item.limit.ymax,
xc:item.xc,
yc:item.yc
})
if(!ys[turnFix(item.yc)]){ys[turnFix(item.yc)] = []}
ys[turnFix(item.yc)].push(item)
if(!xs[turnFix(item.xc)]){xs[turnFix(item.xc)] = []}
xs[turnFix(item.xc)].push(item)
})
// features.forEach(function(item){
// surfaceAnalysis(item)
// indexes.push({
// index:item.index,
// xmin : item.limit.xmin,
// ymin : item.limit.ymin,
// xmax : item.limit.xmax,
// ymax : item.limit.ymax,
// xc:item.xc,
// yc:item.yc
// })
// if(!ys[turnFix(item.yc)]){ys[turnFix(item.yc)] = []}
// ys[turnFix(item.yc)].push(item)
// if(!xs[turnFix(item.xc)]){xs[turnFix(item.xc)] = []}
// xs[turnFix(item.xc)].push(item)
// })
var limitinfo = []
indexes = sameDirection(ys, "xc", limitinfo, indexes)
indexes = sameDirection(xs, "yc", limitinfo, indexes)
// var limitinfo = []
// indexes = sameDirection(ys, "xc", limitinfo, indexes)
// indexes = sameDirection(xs, "yc", limitinfo, indexes)
if(GEN.isLayerExists({job:job,layer:"_ok"})){GEN.deleteLayer({job:job,layer:["_ok"]})}
if(GEN.isLayerExists({job:job,layer:"_fail"})){GEN.deleteLayer({job:job,layer:["_fail"]})}
GEN.createLayer({job:job,layer:'_ok',conext:'misc',type:'document'})
GEN.createLayer({job:job,layer:'_fail',conext:'misc',type:'document'})
// if(GEN.isLayerExists({job:job,layer:"_ok"})){GEN.deleteLayer({job:job,layer:["_ok"]})}
// if(GEN.isLayerExists({job:job,layer:"_fail"})){GEN.deleteLayer({job:job,layer:["_fail"]})}
// GEN.createLayer({job:job,layer:'_ok',conext:'misc',type:'document'})
// GEN.createLayer({job:job,layer:'_fail',conext:'misc',type:'document'})
limitinfo.forEach(function(item){
GEN.workLayer({name:bk,display_number:2,clear_before:'yes'})
// limitinfo.forEach(function(item){
// GEN.workLayer({name:bk,display_number:2,clear_before:'yes'})
// GEN.COM("filter_area_strt")
// GEN.COM("filter_area_xy,x="+item.xmin+",y=" + item.ymin)
// GEN.COM("filter_area_xy,x="+item.xmax+",y=" + item.ymax)
// GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=yes")
// if(GEN.getSelectCount() > 0 ) {
// GEN.selMoveOther({target_layer:'transform_temp',invert:'no',dx:0,dy:0,size:0})
// GEN.workLayer({name:"transform_temp",display_number:2,clear_before:'yes'})
// GEN.selTransform({mode:'anchor',oper:'scale',
// x_anchor: item.xmin + Math.abs(item.xmax - item.xmin) / 2,
// y_anchor: item.ymin + Math.abs(item.ymax - item.ymin) / 2,
// x_scale:1.2,y_scale:1.2})
// // 与成功层touch 有碰移动到失败层 没碰移动到成功层
// GEN.selRefFeat({layers:"_ok",use:"filter",mode:"touch"})
// if(GEN.getSelectCount() > 0) {
// GEN.selClearFeature()
// GEN.selMoveOther({target_layer:'_fail',invert:'no',dx:0,dy:0,size:0})
// } else {
// GEN.selMoveOther({target_layer:'_ok',invert:'no',dx:0,dy:0,size:0})
// }
// }
// })
// indexes.forEach(function(item){
// var xc = item.xc;
// var yc = item.yc;
// GEN.workLayer({name:bk,display_number:2,clear_before:'yes'})
// GEN.COM("filter_area_strt")
// GEN.COM("filter_area_xy,x="+item.xmin+",y=" + item.ymin)
// GEN.COM("filter_area_xy,x="+item.xmax+",y=" + item.ymax)
// GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=yes")
// if(GEN.getSelectCount() > 0 ) {
// GEN.selMoveOther({target_layer:'transform_temp',invert:'no',dx:0,dy:0,size:0})
// GEN.workLayer({name:"transform_temp",display_number:2,clear_before:'yes'})
// GEN.selTransform({mode:'anchor',oper:'scale',x_anchor: xc,y_anchor: yc,
// x_scale:1.2,y_scale:1.2})
// // 与成功层touch 有碰移动到失败层 没碰移动到成功层
// GEN.selRefFeat({layers:"_ok",use:"filter",mode:"touch"})
// if(GEN.getSelectCount() > 0) {
// GEN.selClearFeature()
// GEN.selMoveOther({target_layer:'_fail',invert:'no',dx:0,dy:0,size:0})
// } else {
// GEN.selMoveOther({target_layer:'_ok',invert:'no',dx:0,dy:0,size:0})
// }
// }
// })
// GEN.workLayer({name:bk,display_number:2,clear_before:'yes'})
// GEN.selAllFeat()
// if(GEN.getSelectCount() > 0) { GEN.selMoveOther({target_layer:'_fail',invert:'no',dx:0,dy:0,size:0}) }
// 框选
var flag = true;
IKM.msg(font_layer + "层：请选择需放大的文字，不需制作了请【左键框选空白处】")
while(flag){
var bk2_tmp = bk2 + "_tmp"
GEN.workLayer({name:font_layer,display_number:1,clear_before:'yes'});
var tmp_con = GEN.MOUSE({type:'r',text:"Please Select"});
GEN.workLayer({name:font_layer,display_number:1,clear_before:'yes'});
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+item.xmin+",y=" + item.ymin)
GEN.COM("filter_area_xy,x="+item.xmax+",y=" + item.ymax)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=yes")
if(GEN.getSelectCount() > 0 ) {
GEN.selMoveOther({target_layer:'transform_temp',invert:'no',dx:0,dy:0,size:0})
GEN.workLayer({name:"transform_temp",display_number:2,clear_before:'yes'})
GEN.selTransform({mode:'anchor',oper:'scale',
x_anchor: item.xmin + Math.abs(item.xmax - item.xmin) / 2,
y_anchor: item.ymin + Math.abs(item.ymax - item.ymin) / 2,
x_scale:1.2,y_scale:1.2})
// 与成功层touch 有碰移动到失败层 没碰移动到成功层
GEN.selRefFeat({layers:"_ok",use:"filter",mode:"touch"})
if(GEN.getSelectCount() > 0) {
GEN.selClearFeature()
GEN.selMoveOther({target_layer:'_fail',invert:'no',dx:0,dy:0,size:0})
} else {
GEN.selMoveOther({target_layer:'_ok',invert:'no',dx:0,dy:0,size:0})
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
if(GEN.getSelectCount() > 0){
var tmp_layer = font_layer + "_tmp";
selCopyOther({delExist:true,layer: tmp_layer})
GEN.workLayer({name:tmp_layer,display_number:1,clear_before:'yes'});
GEN.selAllFeat()
selCopyOther({delExist:true,layer: bk2_tmp})
GEN.workLayer({name:bk2,display_number:1,clear_before:'yes'});
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+tmp_con.x1+",y="+tmp_con.y1)
GEN.COM("filter_area_xy,x="+tmp_con.x2+",y="+tmp_con.y2)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=no")
if(GEN.getSelectCount() > 0) {GEN.selDelete()}
GEN.workLayer({name:tmp_layer,display_number:1,clear_before:'yes'});
var limits = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm"})
for (var key in limits) {
limits[key] = limits[key] - 0;
}
}
})
limits.xc = limits.xmin + limits.xsize/2
limits.yc = limits.ymin + limits.ysize/2
indexes.forEach(function(item){
var xc = item.xc;
var yc = item.yc;
GEN.workLayer({name:bk,display_number:2,clear_before:'yes'})
GEN.COM("filter_area_strt")
GEN.COM("filter_area_xy,x="+item.xmin+",y=" + item.ymin)
GEN.COM("filter_area_xy,x="+item.xmax+",y=" + item.ymax)
GEN.COM("filter_area_end,layer=,filter_name=popup,operation=select,area_type=rectangle,inside_area=yes,intersect_area=yes")
if(GEN.getSelectCount() > 0 ) {
GEN.selMoveOther({target_layer:'transform_temp',invert:'no',dx:0,dy:0,size:0})
GEN.workLayer({name:"transform_temp",display_number:2,clear_before:'yes'})
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor: xc,y_anchor: yc,
x_scale:1.2,y_scale:1.2})
// 与成功层touch 有碰移动到失败层 没碰移动到成功层
GEN.selRefFeat({layers:"_ok",use:"filter",mode:"touch"})
if(GEN.getSelectCount() > 0) {
GEN.selClearFeature()
GEN.selMoveOther({target_layer:'_fail',invert:'no',dx:0,dy:0,size:0})
} else {
GEN.selMoveOther({target_layer:'_ok',invert:'no',dx:0,dy:0,size:0})
// 获取里面有几个字母 每一个字母的limits信息
GEN.selChangeSym({symbol:"r1"})
GEN.selContourize()
var feas = GEN.getFeatures({job:job,step:step,layer:tmp_layer,options:"feat_index",units:"mm"})
if(feas.length == 1) {
GEN.workLayer({name:bk2_tmp,display_number:2,clear_before:'yes'});
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor:limits.xc,y_anchor:limits.yc,x_scale:x_scale,y_scale:y_scale})
GEN.selMoveOther({target_layer:bk2,invert:'no',dx:0,dy:0,size:0})
} else if (feas.length > 1) {
var limits_info = [];
feas.forEach(function(item) {
var index = item.index;
GEN.selLayerFeat({layer:tmp_layer, index:index,operation:"select"});
if(GEN.getSelectCount() > 0) {
var tmp_l = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm", options:"select"})
for (var key in tmp_l) {
tmp_l[key] = tmp_l[key] - 0;
}
tmp_l.xc = tmp_l.xmin + tmp_l.xsize/2
tmp_l.yc = tmp_l.ymin + tmp_l.ysize/2
limits_info.push({index:index, limits:tmp_l })
GEN.selClearFeature()
}
})
var rodata = []
limits_info.forEach(function (item, i) {
if(limits_info[i+1]){
rodata.push(getRodate({
xs : item.limits.xc,
ys : item.limits.yc,
xe : limits_info[i+1].limits.xc,
ye : limits_info[i+1].limits.yc
}))
}
})
var angle = rodata.reduce(function(a,b) {return a + b}) / rodata.length;
if (Math.abs(angle) < 10) { angle = 0 }
GEN.workLayer({name:bk2_tmp,display_number:2,clear_before:'yes'});
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:limits.xc,y_anchor:limits.yc,angle:angle})
// 按照中心放大
var limits2 = GEN.getLayerLimits({job:job,step:step,layer:tmp_layer, units:"mm"})
for (var key in limits) {
limits2[key] = limits2[key] - 0;
}
limits2.xc = limits2.xmin + limits2.xsize/2
limits2.yc = limits2.ymin + limits2.ysize/2
if(limits2.xsize > limits2.ysize) {
limits2.x_scale = x_scale
limits2.y_scale = y_scale
} else {
limits2.y_scale = x_scale
limits2.x_scale = y_scale
}
GEN.selTransform({mode:'anchor',oper:'scale',x_anchor:limits2.xc,y_anchor:limits2.yc,x_scale:limits2.x_scale,y_scale:limits2.y_scale})
GEN.selTransform({mode:'anchor',oper:"rotate",x_anchor:limits.xc,y_anchor:limits.yc,angle:360 - angle})
GEN.selMoveOther({target_layer:bk2,invert:'no',dx:0,dy:0,size:0})
}
} else {
flag = false
}
})
GEN.workLayer({name:bk,display_number:2,clear_before:'yes'})
GEN.selAllFeat()
if(GEN.getSelectCount() > 0) { GEN.selMoveOther({target_layer:'_fail',invert:'no',dx:0,dy:0,size:0}) }
IKM.msg(layer + "层完毕，请确认,将正确的移动到_ok层")
GEN.PAUSE("PAUSE")
// 框选
}
GEN.workLayer({name:"_ok",display_number:2,clear_before:'yes'})
// 将ok的移动到文字层
GEN.workLayer({name:font_layer,display_number:2,clear_before:'yes'})
GEN.selDelete()
GEN.workLayer({name:"_ok",display_number:2,clear_before:'yes'})
GEN.workLayer({name:bk2,display_number:2,clear_before:'yes'})
GEN.selMoveOther({target_layer:font_layer,invert:'no',dx:0,dy:0,size:0})
GEN.PAUSE("check");
[tmp1,tmp2,tmp3,bk,bk2,"_ok","_fail"].forEach(function(v){
......@@ -1051,6 +1128,7 @@ function NewGUI (gui) {
"title": props.title || "select",
"list": props.list || [],
"defaultvalue": props["defaultvalue"] || [""],
"defaultsize": props["defaultsize"] || [200, 100],
"columns": props.columns || 2,
"gen":props.gen || GEN
});
......@@ -1144,6 +1222,8 @@ function getWorkStep(props){
if(steplists.length == 0){return "根据脚本参数过滤出来的step不存在，请检查资料或者脚本参数配置！"}
var workstep = gui.selectMultiple({
title: "请先择工作step",
size:[200,100],
defaultsize:[200,100],
list: steplists.map(function(v){ var tmp = {}; tmp[v] = v ;return tmp}),
defaultvalue: steps_tmp,
columns: 1,
......
public_script/tmp3.js 0 → 100644
View file @ c463b267
saveMeans({job:job,step:pcs_step,chklist:oChecklistName})
function mkPath(path, list) {
if (list.length) {
var newPath = path + '/' + list.shift()
if (!fs.dirExists(newPath)) {fs.mkdir(newPath)}
return mkPath(newPath, list)
} else {
return path
}
}
function saveMeans(props){
var job = props.job
var custstep = props.step
var chklist = props.chklist
var nact = props.nact
var jobpath = GEN.getJobPath({job: job})
var filter = props.filter
var afterPath = mkPath(jobpath, ["user", "opencam", "steps"])
var steps;
if (custstep) {
steps = [custstep]
} else {
steps = GEN.getStepList({job: job})
}
if(!steps || steps.length==0){
return
}
steps.forEach(function (step) {
var chkPath = mkPath(afterPath, [step, "chk"])
var chks
if (chklist) {chks = [chklist]}else {
chks = GEN.getChecklist({job: job,step: step})
}
if(chks && chks.length){
chks.forEach(function (item, i) {
var afterChkPath = mkPath(chkPath, [item])
var hdr = "{\n\
\"title\": \"" + item + "\",\n\
\"sequence\": " + (i + 1) + "\n\
}"
fs.writeFile(afterChkPath + "/hdr", _.toString(hdr))
var nacts = []
if (nact) {
nacts = [nact]
} else {
var nactCount = GEN.getChklistActCount({job:job,step:step,chklist:item})
for (var i = 0; i < nactCount; i++) {
nacts.push(i+1)
}
}
if(nacts.length > 0){
var actionPath = mkPath(afterChkPath, ["actions"])
nacts.forEach(function(index){
var titleFile = GEN.INFO({
entity_type: "check",
entity_path: job + "/" + step + "/" + item,
data_type: "TITLE",
options: "action=" + index,
parse:'no'
})
var title = fs.readFile(titleFile)
title = title.split("=")[1].trim()
title = title.substring(1, title.length-1)
var nackPath = mkPath(actionPath, [index+"-"+title])
fs.writeFile(nackPath + "/hdr", "{\n\
\"title\": \"" + (index + "-" + title) + "\",\n\
\"sequence\": " + index + ",\n\
\"dfm_name\": \"" + title + "\"\n\
}")
var displayFile = GEN.INFO({
entity_type: 'check',
entity_path: job + "/" + step + "/" + item,
data_type: 'MEAS_DISP_ID',
options: "action=" + index,
parse:'no'
});
fs.writeFile(nackPath + "/disp", fs.readFile(displayFile))
var measFile = GEN.INFO({entity_type:'check', entity_path:job+'/'+step+'/'+item, data_type:'MEAS', options:"index+action="+index, parse:'no'});
var means
if(filter){ // 处理过滤
var fileArray = []
var file = fs.openFile(measFile,'r');
while(!file.atEnd()) {
fileArray.push(file.readLine())
}
if(Array.isArray(filter)){
var nowFilter = filter.filter(function(item2){
for (var key in item2) {
var value = item2[key]
if (!Array.isArray(value)){
item2[key] = [value]
}
}
return item2.step.indexOf(step)>=0 && item2.chk.indexOf(item)>=0 && item2.nact.indexOf(index)>=0
})
if (nowFilter.length > 0){
var nowfilter = nowFilter.map(function(v){return v.filter}).reduce(function(a,b){
b.forEach(function(v2){
if (a.indexOf(v2)<0){
a.push(v2)
}
})
return a
},[])
fileArray = fileArray.filter(function(line){
var flag = false
nowfilter.forEach(function(f){
var reg = new RegExp(f, "ig")
if (reg.test(line)){
flag = true
}
})
return flag
})
}
} else if (typeof filter == "object") {
if (filter[step] && filter[step][item] && filter[step][item][String(index)]) {
var nowFilter = filter[step][item][String(index)]
if (!Array.isArray(nowFilter)){nowFilter = [nowFilter]}
fileArray = fileArray.filter(function(line){
var flag = false
nowFilter.forEach(function(f){
var reg = new RegExp(f, "ig")
if (reg.test(line)){
flag = true
}
})
return flag
})
}
}
means = fileArray.join("\n")
} else {
means = fs.readFile(measFile)
}
fs.writeFile(nackPath + "/meas", means)
})
}
})
}
})
}
// 自定义信息
saveCustChk({job:job,custChk:custChk})
function saveCustChk(props){
var job = props.job
var chkinfo = props.custChk
var path = mkPath(GEN.getJobPath({job: job}), ["user", "opencam", "steps"])
chkinfo.forEach(function(chk){
var ckpath = mkPath(path, [chk.step, "chk","custom_chk"])
// 写入action hdr
fs.writeFile(ckpath+"/hdr", "{\n\
\"title\": \"cust_chk\",\n\
\"sequence\": 0\n\
}")
var actionPath = mkPath(ckpath, ["actions"])
chk.action.forEach(function(action, i){
var nact = i + 1
var nactPath = mkPath(actionPath, [nact+"-"+action.name])
// nactPath 写入 meas hdr display
fs.writeFile(nactPath + "/hdr", "{\n\
\"title\": \"" + (nact + "-" + action.name) + "\",\n\
\"sequence\": " + nact + ",\n\
\"dfm_name\": \"" + action.name + "\"\n\
}")
if (Array.isArray(action.meas)){
action.meas = action.meas.map(function(mea, i){
return mea + " " + nact + " R " + String(i + 1)
})
action.meas = action.meas.join("\n")
} else {
action.meas = action.meas + " " + nact + " G " + 1
}
if (!/string/ig.test(typeof action.disp) ) {
action.disp = action.disp.workLayer + " "+ nact+" "+action.disp.showLayers.join(" ")
}
fs.writeFile(nactPath + "/disp", action.disp)
fs.writeFile(nactPath + "/meas", action.meas)
})
})
}
\ No newline at end of file
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment